Skip to main content

Hi, I am having a problem with 2 of our fixtures, the shutter in extended mode is having dmx issues with the strobe and pulse values. I believe its probably an out of date firmware issue, could one of you confirm this, and point me in the direction of the latest firmware upgrade as I can't find it in the firmware section of the forum.

Cheers  

Original Post

Replies sorted oldest to newest

all our units are on 3.1.1 as far as I am aware, and all the 5r pros that I have tested all have the same problem. I have only just started working here, but have been tasked with sorting all the movers out. In extended mode the shutters are not receiving any DMX values for the strobe and pulse shutter attributes, but they are receiving for open, close and random strobe. Although in Basic and Standard mode all of the shutters attributes are working fine. From looking through the forum it seems that the beam extremes had the same problem and that a firmware update sorted the issues out. I don't believe our 5r spot pros have ever been updated.

Cheers

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×