Roller Rink Wash with LED?

mikey wassup man? long time no see huh? how ya been. ok down to business. i would look at the design led 36 moving heads and a bunch of octo strips. what is ur budget? also look at the ELED blinder and the design panel and also the trackpod 81. jingles! and how i would mount em is put the heads towards the center of the rink and line the outside with either strips or trackpod 81's. my opinion. jingles!

the lumen output of the design heads and led blinders is far too little for tryin to light a roller rink. trim height is 22 feet. those fixtures would get washed out instantly by all of the other lighting. But thanks for the try

well why didn't u post ur hanging height in the first place? give me a day i will try again! jingles!

You might want to try Pulsar, or ChromaKinetics - they have some LED fixtures that have a good output. But, at that height, you're pushing a LED product quite far; why are you choosing to use LED?

^^^bump^^^

To all: The forum is still being worked on so if any postings experience problems I sincerely apologize.

testing 1,2, testing 1,2,3?

Well...we do offer some LED fixtures now which have enough output to work in this type of environment - even IP 65 Rated - check out our Design Panel 72 - which has lumen output comparable to 250W discarge units in colors.

Check it out...

http://www.elationlighting.com/product.asp?ProductIDNum...9&cat=LED%20Lighting