Tagged With "artnet"

having trouble getting my enode4 configured for artnet with an ETC Nomad EOS console. cant get output. from the DMX ports. IP address on the console: 10.101.0.1 IP address on the eNode: 10.101.0.2 subnet: 255.0.0.0 ports set to output. i can get it to work with Madrix but no luck with the ETC console. anyone have any tips? thanks

Try the 2.x range instead? Some consoles prefer that, or try the sACN options if your console has it. sACN is far more robust than artnet and works great on the Enode 4.

Why would Elation choose a default IP address in the 2.0.0.0/8 subnet? That address range is assigned for ISP and corporate usage through RIPE. Wouldn't one of the reserved private network blocks, such as 10.0.0.0/8 have been a better choice?

Hi, I'm new to the eNode4 ... I'm trying to use this to output 2 ports of ArtNet Subnet 0/Universe 0 and ArtNet Subnet 0/Universe 1. I've been able to get Universe 1 out of the eNode. Net 1/Primary 1/Secondary 1/Resend disabled.. No luck yet on Universe 2... I understand that "Principal" is the universe number... I've tried setting Primary to 2... no joy. Suggestions? What is "Secondary"/what should it be set at? Thanks in advance Dennis

I am having an issue getting a new network (Artnet/sACN/RDM to DMX) ethernet interface ouput to play nicely with our installed Opto Branch 6. DMX signal to the unit is intermittent and sometimes non-existent even though the controller software (Lightkey) and the interface box show consistent and expected DMX output. I am working through verifying the pinouts (3pin to RJ45 on Cat5 adaptor) at the output side of the box but I have also come across the possibility of setting a DMX frame rate...

Hi, i would try turning the terminate to on or off depending on where it currently is at and also try turning off RDM to see if that helps with these issues before adjusting the framerate of the DMX signal.