Skip to main content

Tagged With "Fixture Firmware"

Everything
Reply

Re: SD3 Playbacks containing presets, selected fixtures question

sdman ·
Maybe try using a scene instead of a preset. If I recall, presets usually require you to select fixtures ahead of time before calling. Scenes will simply include whatever you put in the scene. It's been a while since I worked with this so I don't recall every detail. It should be in the instruction manual though.
Reply

Re: SD3 Playbacks containing presets, selected fixtures question

George Webb ·
Thanks SDMAN. I just tried using Scenes instead of Presets, but Scenes seem to have a few different problems: Scenes sometimes want to cancel each other when turning them on. (Does anyone know why this is?) This makes it hard to turn on multiple scenes simultaneously. When a scene fades out, it fades its channels down to zero, rather than letting them stay at their "color scene". I thought "HTP" would allow the highest value to control the channel, but apparently it means a controller will...
Reply

Re: SD3 Playbacks containing presets, selected fixtures question

George Webb ·
Here's a possible explanation: I noticed my fixtures' DMX channels are assigned to multiple fixtures, at least one of which is a single "32 channel DMX" fixture, which therefore contains all my 4 fixtures (7 channels each, channels 1~28). I don't know why they did that, versus setting up correct separate 7-channel profiles, but perhaps that would explain why the Scene recalls seem to be interfering with each other!? Maybe I should erase the whole console and start over? Still trying to get...
Reply

Re: SD3 Playbacks containing presets, selected fixtures question

sdman ·
Do you have the manual on pdf? That should cover every detail as to how it works.
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Rayzor 360Z Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Color 5 and CW Current Firmwar

Frogger ·
Could someone please tell me the latest firmware/software for these units? Thanks
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

SD3 Playbacks containing presets, selected fixtures question

George Webb ·
Hello forum. My rock & roll venue system is 4 identical RGB fixtures (Opti RGB) with a SD3 console. 7 DMX channels per fixture. I'd like to have the Flex Faders control all 4 fixtures together, for a common "color scene" that I can change easily. Done already; just select all 4 Fixtures, and their 7 DMX channels appear automatically together on Flex Faders 1~7. Next I would like to have 4 separate Playback masters (in HTP mode!?) bring up "white" (R, G, B) for each respective fixture,...
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fixture Profile for American DJ Focus Spot 3 moving light

phillipmaz ·
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic

Rayzor Q7 & Q12 Zoom Fixture Firmware.

elationservice ·
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

ELA GINES ·
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

Jingles8302 ·
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic

ACL Bar 360 Fixture Firmware

elationservice ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DTW Bar 1000 Fixture Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60IP Firmware V1.07

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Six Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Six Par Z19IP Firmware V 1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

DW Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

CUEPIX Panel Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader CUEPIX Panel Firmware V1.20 What's new: Changed the term Master/Slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Service for broken fixtures

Chrisguitar999 ·
I have two problematic fixtures that I ordered replacement parts for per the recommendation of one of Elations Service employees. Since then, they have arrived, I've replaced the parts, both fixtures are still not working and that person in the service department has not replied to me for weeks. Wondering what I need to do to get in touch with someone that can help. Thanks in advance.
Reply

Re: Service for broken fixtures

ELA GINES ·
Greetings , please forward me your correspondence so i can review asap.. please forward to Parts@elationlighting dot com.
Topic

ACL Par 200 & 200IP Firmware

elationservice ·
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Reply

Re: Cuepix Series Fixture Firmware

elationservice ·
Split off CuePix Blinder WW2 and WW4 into their own thread with newer updated firmware: See here
Reply

Re: Cuepix Series Fixture Firmware

elationservice ·
Updated firmware's and models August 2017.
Topic

Cuepix Series Fixture Firmware

elationservice ·
Cuepix Batten Fixture Firmware V1.10 What's new: Improvements to the strobe timing. Cuepix Panel V1.18 What's new: Improved RDM information when using on a MA2 controller the RDM light will also flash. (More Cuepix series firmware coming soon) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader...
Topic

Protron Eclypse Firmware

elationservice ·
Firmware Tool Required: A-Loader (SNI211) Protron Eclypse Firmware V1.5 What's new: The flickering image on 16bit master channel Using duration and rate set at 255 in manual mode to get a steady output Use only 75% of max output power in manual mode. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...
Topic

Volt Q5E Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Volt Q5E Firmware V1.0.4 What's New: Change menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Protron 3K Color Firmware

elationservice ·
Uploader Tool Required: SNI Uploader Protron 3K Color Strobe Firmware V1.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply

Re: DTW Blinder 700IP Firmware

juan ·
Buenos días, mi pregunta, yo tengo los dtw 700ip y estan en la versión 1.0.5 por solo hay en la paguina la versión 1.0.4
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
Firmware V1.06 is available for download. V1.06 esta disponible
Reply

Re: DTW Blinder 700IP Firmware

juan ·
muchas gracias
Reply

Re: DTW Blinder 700IP Firmware

juan ·
buenas tardes me paso algo muy raro estoy actualizando los dtw 700 solo me estan prendiendo un solo lente sera q me puedes colaborar con este problema
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
¿Ocurrió el problema con todas tus luces, o solo unas pocas? ¿Estaba el problema presente antes de la actualización?
Reply

Re: DTW Blinder 700IP Firmware

juan ·
me pueden regalar la version 1.0.4 aver si puedo recuperar las targetas q no me estan funcionando
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
Por favor envieme un correo electronico a ricardo.campos@elationlighting.com
Reply

Re: DTW Blinder 700IP Firmware

juan ·
Mi correo es tobondavid@hotmail.com
Reply

Re: DTW Blinder 700IP Firmware

elationservice ·
UPDATED to V2.0.0 Firmware in Original post.
Topic

Platinum Seven Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Platinum Seven Firmware V1.2.1 What's New: -Master/Slave text changed to Primary/Secondary You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

Fixtures for GrandMA3

Jan Wyden ·
Hi Our event hall buys Fuze Profile, Fuze Wash FR and Fuze SFX. We have a GrandMA3 Light, Unfortunately I have not found any fixtures for the MA3. Does anyone know where I can find some? Thanks a lot Jan
Reply

Re: Fixtures for GrandMA3

Rainschn ·
You can use MA2 Fixtures and convert them via Export to MA3 Fixtures. I think there are some Videos in the Web who are explaining how that works.
Topic

Elation LED Spot II Locking up

OwenSmith ·
Hey everyone, I am working with six different LED Spot II moving head fixtures, and they are all having the same issue. They will randomly lock up and not respond to any DMX control signals. The only way to fix it is with either a power cycle, or to wait until the fixture automatically does a fixture reset. After which, everything is back to normal until it locks up again. It only seems to effect the LED II fixtures, and not our LED III fixtures. Is this a common issue? Is there a way to fix...
Reply

Re: Elation LED Spot II Locking up

ELA GINES ·
Greetings, can you please email me at gines dot gines at elationlighting dot com. please confirm the model as well as currently serial number they are on.
Topic

Seven Par 19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Seven Par 19IP Firmware V1.113 What's New: Improved thermal protection. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic

Fuze Wash 575 Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Fuze Wash 575 Firmware V1.04 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
 
Post
×
×
×
×