Tagged With "C-Loader"

Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com

Uses C-Loader uploader tool. Paladin Cube Firmware V1.04 What's New: changed menu wording from Master/Slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...

Is the C-Loader the direct replacement for the Cue Uploader? I need to update some non-IP Sixpar 100's.

Greetings, yes the C-loader supersedes the previous CUE211.

Upload tool: C-Loader or USB Stick Seven Par 7IP Firmware V1.14 What's new: Improved thermal protection You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...

Firmware Tool Required: C-Loader II Fuze Wash Z350 Firmware V2.1.13 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/ Backwards compatible/ same functionality as previous. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...

Firmware Tool Required: C-Loader II Fuze Par Z120IP Firmware V1.16 What's new: Superseded IC Chips. (Not a critical update.) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...

Uploader Tool needed: C-Loader Or USB KL4 Fresnel Firmware 1.09 KL6 Fresnel Firmware V1.10 KL8 Fresnel Firmware V1.10 KL Panel Firmware V1.10 KL Panel Release notes: IC changes due to supply chain shortages. Please note units with V1.10 cannot be downgraded, however earlier units can be updated to V1.10, however this is not a critical update. KL8 FC Firmware V1.05 What's new: Superseded IC chip. (Not critical update) USB Update Instructions You should not attempt uploading the firmware to...

Hello, I keep getting an Error when the second GSD file is uploading I already try updating it with the USB and with the C-Loader and I get the same problem please advice thanks in advance.

Upload tool: C-Loader or USB Stick CuePix 16IP DTW V1.05 What's new: Changed 1U: change the STM32F103RCT6 to GD32F103RCT6 UPDATE NOT NEEDED/NON CRITICAL You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures.

Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.0.15 What's new: Noncritical update due to IC change and global supply issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...

Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.

make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors

I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.

shoot me an email with your info.. gines dot gines at elation lighting dot com

hello, where can I find usb update manual?

Uses C-Loader uploader tool. Paladin Panel Firmware V1.2.0 What's new: Fixed display code bug and resolved a RDM addressing issue. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...

Firmware Tool Required: C-Loader II Fuze Pendant Firmware V1.10 What's new: V1.10 INTERNAL OPTIMIZATIONS V1.09 SOLVED BUG WITH PRIMARY/SECONDARY NOT WORKING CORRECTLY V1.08 SOLVED BUG WITH 17CH MODE ADDRESSING ABOVE 494 V1.07 SOLVED BUG WITH DISPLAY You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...

This firmware is for the C-Loader II units themselves and requires 2 (two) C-Loader units to update the firmware of one. (one to update, and another to act as the fixture to send the update to the unit needing updating) C-Loader Firmware Update Release notes: optimized processing. Instructions: updating a C-loader requires a second C-loader. The first c-loader can be treated as a fixture. the C-loader Being used to update can be on an early version. Once updated you can then update your...