Tagged With "Elation"
Reply
Re: Elation Satura Profile G5UFan1 Er
Hey @Michael Dimsey , I would check number 5 board. That board would be the PCB with 7 Drivers Located towards the LED Source. It should have a sticker labeled HY1324/5U01, or the board should have a PCB1127-0-C. That fan should go to that board and connected to 5JB1. I would just follow that connection to the fan.
Topic
Old Trackpod 81 TP-81 Intelligent LEDs Color Systems blowing fuses at power on.
Hello All, While I am a electronics technician, I have no experience with production lighting or LED systems as I am more of an amp guy. I recently purchased 8 old Elation/Alkalite TP-81 Intelligent LED Color Systems ( Link ) and a few 575E AT moving head lights at a liquidation sale for a local production company. Literally everything has 1 or two issues, but almost all of the TP-81sblow the 2A GMA fuse at power on. I am guessing this must have been a common issue with these because they...
Topic
FuzeWash Z350 & Z120 Color Presets
We are currently using ShowXpress software so I am having to build my own profiles for all my new Elation lights. I am looking for a list of all the 64 Color Presets to properly name them, as well as the 13 Color Macros. I've searched on here as well as Google and haven't been able to locate the information. Thanks
Topic
Fixture Profile for American DJ Focus Spot 3 moving light
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic
Using MIDI with Alcorn McBride WinScript
I'm designing a 4D simulation using an Alcorn McBride V16 Pro as the base controller. For the lights, the V16 has MIDI out which I'm sending to an SD2 lighting board. The issue is that the MIDI format is different than standard MIDI. Does anyone know any workarounds for this? Particularly if you've had experience using WinScript to program MIDI cues. I don't know if there is a way for the MIDI message to automatically convert to Elation's format or if there is a specific I/O or variable I...
Topic
Elation Satura Profile G5UFan1 Er
Hello, Can anybody help me locate g5UFAN1? My fixture is showing an error and I would like to try to replace the fan. Thank you!
Reply
Re: Old Trackpod 81 TP-81 Intelligent LEDs Color Systems blowing fuses at power on.
Greetings unfortunately this is a very old unit and literature is no longer available. I would look at the toroidal transformer, im willing to bet its shorting out. FYI we no longer have parts available as well.
Reply
Re: Old Trackpod 81 TP-81 Intelligent LEDs Color Systems blowing fuses at power on.
Thank you. I will take a resistance measurement from one of the functional units and see if I can find a suitable replacement.
Reply
Re: Using MIDI with Alcorn McBride WinScript
Good morning, i will refer this one to our show designer engineer Ken. it may take a day or so, just an fyi
Reply
Re: Using MIDI with Alcorn McBride WinScript
The SD2 uses standard MIDI continuous controller messages to trigger scenes. As long as you can generate those from you software you should be able to create cues. The SD2 manual has a page that shows how to make the message. Controller messages work better than notes for this controller due to the large number of scene slots.
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic
Service for broken fixtures
I have two problematic fixtures that I ordered replacement parts for per the recommendation of one of Elations Service employees. Since then, they have arrived, I've replaced the parts, both fixtures are still not working and that person in the service department has not replied to me for weeks. Wondering what I need to do to get in touch with someone that can help. Thanks in advance.
Reply
Re: Service for broken fixtures
Greetings , please forward me your correspondence so i can review asap.. please forward to Parts@elationlighting dot com.
Topic
Show Designer 1 - Not operating
Hi, I recently got back to my Winter job and found that our Show Designer 1 is inoperative. When I tried to turn the power switch on or off the blue LCD screen flashes for a second then goes blank. Nothing is operative on the board, no lights (LED) or anything. Is there a method of restoring to factory? Or is this a failure that needs a factory repair (RMA)? How do I contact Elation for an RMA ans shipping instructions? Thanks for the assist in advance. SquireDude
Topic
Wireless DMX not working! Help Please
I recently bought Elation Event Cylinders with built in Wireless DMX. Everything seems to work fine with this exception: I cannot connect my DMX transmitter to the units. I've tried every mode and variation I can find. Elation support was unable to help. Does anyone have knowledge of these units? I appreciate any assistance. Thank you!
Reply
Re: Wireless DMX not working! Help Please
It's not elation. It is Haotao. Pic attached shows specs.
Reply
Re: Wireless DMX not working! Help Please
If it’s not using a “wireless solutions” card then it’s not compatible.
Topic
Elation LED Spot II Locking up
Hey everyone, I am working with six different LED Spot II moving head fixtures, and they are all having the same issue. They will randomly lock up and not respond to any DMX control signals. The only way to fix it is with either a power cycle, or to wait until the fixture automatically does a fixture reset. After which, everything is back to normal until it locks up again. It only seems to effect the LED II fixtures, and not our LED III fixtures. Is this a common issue? Is there a way to fix...
Reply
Re: Elation LED Spot II Locking up
Greetings, can you please email me at gines dot gines at elationlighting dot com. please confirm the model as well as currently serial number they are on.
Topic
Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi - I'm using a Martin M2GOHD - which I understand is now supported by Elation who market the controller as the NX2? I am seeking fixture profiles for a number of Martin fixtures: Martin ELP CL LED profile Martin Rush Par3 RGB Martin Rush Batten 1 Hex I can't find fixture profile downloads on the Elation webiste or anywhere else? Any pointers please on this would be greatly appreciated ASAP as I am on a very tight schedule to get the show programmed and would rather avoid having to create...
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi, try the obsidian website. It’s all in the 4.4 download. www.obsidiancontrol.com
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Thank you so much for the swift reply - really appreciate it. The M2GOHD desk I have inheritted is running M-Series software 3.70.885.0 which as far as I can tell is the last M-Series OS version released? I am extremely nervous about trying to change this to Onyx at this stage. We are a community organisation and were donated the desk 'as is' and don't have the funds or the knowledge to start getting into OS upgrades.😕 On the Obsidian Control website (great tip thank you) however I did find...
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi, all you need to do is place the .EXE installer onto a USB stick, plug it into the console and run the fixture library update from the settings menu on the console. You cannot import individual fixtures from the exe, you need to let it update the whole library. This is the way it has always been done.
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Thank you so much - managed to get to the Fixture LIbrary update via the Tools menu and worked a treat! Really appreciate the swift advice! Thank you too for replying to my other post re. training - will give the FB group a try. Cheers,
Topic
E Spot Discuntinued Need Parts
Hello Everyone, question: I own a Elation E Spot LED. It works great but do not light up which we believe the light is gone. I contacted Elation and they are not able to provide any kind the help. So I am in the quest to see if anyone sell the part needed. My question is Do anyone know if any other Elation Fixture have the same kind of "bulb" I know is a LED and don't have bulb I guess is a chip if any other Elation model will fit that so it will expand my range of searching I will have more...
Topic
Elation 360i LCD blinking
Hi, I have a row of 15 Elation 360i fixtures and all of them won't take DMX signal when powered anymore. I've had them for a long time now and they've been working great. However, all the sudden all of them started not taking signal and their screens are blinking on and off in sync. I looked through the entire manual and couldn't find anything about it. Does anyone here know what's wrong with the fixtures?
Reply
Re: Elation 360i LCD blinking
greetings sounds like you blew the dmx driver which is located on the display, if you have a good unit swap the display and test... https://parts.elationlighting....898/?parent_id=20038
Topic
Fuze z350 home position pan 90deg off
We have six (6) of these fixtures installed since 2017, and have recently sent all 6 back to Elation for repair (had two started dying within weeks of each other, so just sent all 6 in to have the identical replacement process done preemptively). three (3) of the six came back from Elation with their "home" position 90 degrees off (the yoke perpendicular to the menu screen), while the others remain as they were (home is yoke parallel with the menu screen). Console/control is JandsVista V3 A...
Topic
AutoCAD File for NX2
I was wondering if anybody has the AutoCAD file for the NX2. Putting one in a design for a broadcast studio and cannot find the birds eye view of it. TYIA.
Topic
Chase doesn't loop
I have a Elation DMX operator Pro console. When I manually create chase scenes, ( meaning I am not just setting up chases from existing scenes that are saved) lets say 10 steps. After saving and hitting the play back, it cycles thru the 10 steps and stops on the last step instead of starting back at the beginning of the chase. This is just on the moving light section, I am not using any par cans. Just moving heads and 4bar L.E.D.'s. In addition, when i program a chase that is built from...
Reply
Re: Chase doesn't loop
Hi, check your method against the official tutorial videos: https://youtu.be/WnmX5FxZS1g https://youtu.be/YIkT6GiPls4
Reply
Re: Chase doesn't loop
Yeah I watched tons of videos on this including the one you sent. They only explain how to do scene chases.
Topic
Flickering Light
Hello guys, unfortunately I have a problem with the Elation KL Panel RGBWCL. Once every while the light is flickering, mostly about every 15 minutes. It doesn't matter if it's wired or the signal comes wireless. Even after an update (to V1.10). Can someone help me with this? Thank you very much!
Reply
Re: Flickering Light
Just to get the message right, we have about 20 to 25 panels in our show, and the flickering is not always the same panel, but always another one...
Reply
Re: Flickering Light
I would look at your DMX runs and make sure: A) That you don't have too many DMX devices on one run B) that the DMX line is terminated at the end C) If you have a DMXcat or DMX tester, try sitting in a cue/look and seeing if the flicker finder notices anything. You can also view the DMX levels while you see the flicker and see if something is being sent that shouldn't.