Tagged With "Fresnel"

We do not have updates for the unit. Please feel free to contact me at santanaz@elationlighting.com so I can run you through some troubleshooting, if you have not already taken care of this.

I just purchased a handful of KL6 and KL8 fixtures. They've been great for the last week but we just had one completely freeze at full on us. We've taken it down for testing and it doesn't respond to DMX or manual control. It can be seen through RDM and we can use the menu on the side just fine but the light just sits at full intensity. The other 20 we have are just fine. Is there a way to globally reset the fixture? Does it need a firmware update? Or is this our first (and hopefully last) RMA?

Hello I am working with a local church regarding some new lighting and have a few questions. I am looking at the following lights: -Elation KL Fresnel 6 150W 3000K -Elation KL Fresnel 4 50W 3000K Four of the 6" Fresnels across the front. Two 4" Fresnels for backlighting the main speaker and another two 4" Fresnel for additional lighting. My main question regards controlling theses lights. The church uses the following for lighting control: -ADJ DP-DMX20L 4 channel Dimmer Packs (qty4) -Stage...

Thank you for your response. So, just to be clear. Fixtures need to plug straight into AC with the powerCON/Edison adapter. DMX just daisy chains through the lighting fixtures. DMX addresses each fixture directly. Correct?

That sounds correct to me, yes.

Hi, these KL series of fixtures cannot be run off of a dimmer pack, or at least the ones you mentioned cannot. they need their own power source that is outside of the edison plugs on the DP-DMX20L. and they will have to be wired into DMX in the chain as new fixtures.

Firmware Tool Required: C-Loader II and/or USB KL Fresnel 6 FC firmware V1.04 What's new: Reset Default via RDM added. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...

Uploader Tool needed: C-Loader Or USB KL Fresnel 6 CW Firmware 1.0.7 What's New: Internal Optimization You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...

Uploader Tool needed: C-Loader Or USB KL Fresnel 8 CW Firmware 1.0.7 What's New: Internal Optimization You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...

Uploader Tool needed: C-Loader Or USB KL Fresnel 4 CW Firmware 1.0.7 What's New: Internal Optimization You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...