Tagged With "Pendant"

Firmware Tool Required: C-Loader Colour Pendant Firmware V1.15 What's new: V1.15 25KHZ REFRESH RATE ADDED V1.14 UPDATED CPU V1.13 MASTER/SLAVE CHANGED TO PRIMARY/SECONDARY & HUE COLOR ORDER BUG SOLVED V1.10 DMX FLICKER ISSUE RESOLVED You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section...

Firmware Tool Required: C-Loader II Fuze Pendant Firmware V1.11 (Applies to Fuze Pendant/ Fuze Pendant White/ Fuze Pendant (HW) What's new: RDM Improved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures.

We just installed the elation fuze pendants, both the full size and mini version, in our main auditorium. First, we are trying to figure out how to install a different lens. The instructions say to loosen the screen, open the cover, add the lens, close the cover and screw the screw back in. When we close the lid, it seems super tight and we don’t want to force it. Any suggestions? I'm also curious if anyone has a guide on mixing the color for the correct color temperature. I’m currently...

Hello the instructions provided in the manual are pretty accurate, make sure the pinch bolt is completely backed out (but no removed) otherwise the lid will not close flush. also make sure the lens is properly seated in the output hatchportion of the pendant.

The problem we have, it does not seat in there because of the rubber around the lens.

can you please email me a picture.. send to parts@elationlighting.com

https://youtu.be/rCON3m-e-7Y

Hi, if you can also email that video link to the email Gines posted above, someone would get back to you faster than on the forums. Thanks!

I did. Same time that I posted it.

I emailed the same time I posted in the forum.

OK great thanks!

We are also having problems opening the lens cover: https://youtube.com/shorts/gumXwxkzgto?si=UvgIj1cfBDdceD

Hello, the 3mm pinch bolt is still making contact with threaded portion, please unthread a little more and you may have to slightly pry on the Allen head portion in order to clear the Threaded portion

Not sure that you can. There’s no way of really grabbing a hold of that bolt and pulling it out more because it’s screwed into something which I’m assuming must be some plastic or something. I tried open the one and I got it, but it was not easy. I’ve had to fight three or four more.

We have the bold screwed all the way out. So pry on the bolt head to pull further back?

Do you have a chart that helps set color mixes that match different kelvin ranges? For example, if I want the lights to be 3200K, what mix of LEDs in DMX would I set?