Tagged With "ACL"

Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com

Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...

I recently bought a couple of the Elation ACL 360i units from eBay. I could do with the easiest way to set them both up to move in synchro with each other. Either via a DMX controller or via a laptop pc. CURRENTLY i have not even seen the lights working. i mean they self test the moving of the heads but no lights. Hope they are working. thought there may be some sort of Demo mode built into the menu system to test them. anyhow - any help for a NOOB would be very much appreciated. I realise...

Hi, to get to any sort of auto modes grab a copy of the user manual online and it will tell you how to set them to that function in the manual. The LAN will only really work if you have a DMX controller or console with a Ethernet/Artnet function, of which the cost will be greatly higher to have than a typical DMX software package and hardware. You could be perfectly fine running this off of a basic DMX controller board such as the ADJ DMX FX512: https://www.adj.com/dmx-fx512