Tagged With "Wireless"

I recently bought Elation Event Cylinders with built in Wireless DMX. Everything seems to work fine with this exception: I cannot connect my DMX transmitter to the units. I've tried every mode and variation I can find. Elation support was unable to help. Does anyone have knowledge of these units? I appreciate any assistance. Thank you!

It's not elation. It is Haotao. Pic attached shows specs.

If it’s not using a “wireless solutions” card then it’s not compatible.

What brand of transmitter are you using

https://forums.elationlighting.com/

Hey Folks, we were super hyped after the announcement of the new Jolt Panel and the new Wireless System. We use a full stage setup with different fixtures which are connected through Wireless DMX protocolls. We now tried the Aria X2 for connecting the Jolt FXIP. But it seems, that the protocol is not able to perform a low latency signal. Using multiple fixtures makes them light up in different timings and also the channels in one fixture are not simultaneous. I see, that Elation is now...

Finally got my Aria X2 Transceiver. Did some testing using LightKey, Enttec USB Pro, Aria X2, and Jolt Panel FX2. Here are the results: 1. 2.4GHz works but only if Channel is set to 00. I played around with different channels on both Aria and Jolt Panels and anything other than both set to 00 wouldn't work. 2. Sub Gig US doesn't work, no matter what channel it is set to. 3. Sub Gig EU doesn't work. 4. Any channel other than 00 doesn't work. 5. Mesh doesn't work. If Mesh is set to on, Aria X2...

Thank you Steven, I also own a Bridge now and have the feeling that the used firmware is very buggy. it’s also not working like it should in comparison to the old e fly transceiver. Best, Mike

Hello, we own Aria Bridge for our showroom and it causes me big trouble controlling Sol 1 blinders. Normally they even don`t connect to the bridge. Sometimes after pressing the right weird combination it actually connects. But the numbers of channels never match. I feel it is undone software. Don`t know why they even released it for sale when it doesn`t work. I did a mistake and sold it to a customer so I am wuite worried on a result when he receives his batch of Sol blinders.

Finally got my Aria X2 Transceiver. Did some testing using LightKey, Enttec USB Pro, Aria X2, and Jolt Panel FX2. Here are the results: 1. 2.4GHz works but only if Channel is set to 00. I played around with different channels on both Aria and Jolt Panels and anything other than both set to 00 wouldn't work. 2. Sub Gig US doesn't work, no matter what channel it is set to. 3. Sub Gig EU doesn't work. 4. Any channel other than 00 doesn't work. 5. Mesh doesn't work. If Mesh is set to on, Aria X2...