Skip to main content

Tagged With "Display"

Everything
Topic

Display for Sixpar 100ip and 200ip

Travis.Blansit ·
Hello! I have been working on cleaning and ensuring my Sixpars are functional at my work. I was given a solution to clean the instruments (it had ammonia) and I used it to clean them with permission from higher ups. I’m finding that my display screens are blinking specifically on the dmx address screen when they were fine before. Is there anything I can do to try and fix this, or did I just destroy the display and will need to order a new one?
Reply

Re: Display for Sixpar 100ip and 200ip

Travis.Blansit ·
To clarify, the power still works. I’m not getting any signal for the dmx.
Reply

Re: Display for Sixpar 100ip and 200ip

ELA GINES ·
Greetings, when the display is blinking this means there is not data... Please confirm data is being sent from the controller... if there is data present and the display flashes then you have blown the DMX driver and will need to replace the display.
Topic

SIXPAR 200 Display PCB connector burned

WilsonLR ·
I have 9 fixtures and love them. However, I recently had one that stopped responding to DMX and glowed a dim white when powered up. I know from the past this is a bad Display PCB. After replacing it with a new one, it still behaved the same way. When disassembled, I noticed the LED connector had burn marks on two pins ( see attached) . I cleaned and scraped them and the fixture worked fine. I noticed this connector had an extra heavy dose of red wax and some of the wires were loose requiring...
Reply

Re: SIXPAR 200 Display PCB connector burned

alex99 ·
Hello there i do hope all is well and you are doing okay. In regards to this, please reach out to us via the support email Support@Elationlighting.com and we can proceed from there. Thank you
×
×
×
×