Skip to main content

Tagged With "art-net"

Everything
Topic

Enode4

predock ·
having trouble getting my enode4 configured for artnet with an ETC Nomad EOS console. cant get output. from the DMX ports. IP address on the console: 10.101.0.1 IP address on the eNode: 10.101.0.2 subnet: 255.0.0.0 ports set to output. i can get it to work with Madrix but no luck with the ETC console. anyone have any tips? thanks
Reply

Re: Enode4

Jingles8302 ·
Try the 2.x range instead? Some consoles prefer that, or try the sACN options if your console has it. sACN is far more robust than artnet and works great on the Enode 4.
Reply

Re: Enode4

Dave Nelson ·
Why would Elation choose a default IP address in the 2.0.0.0/8 subnet? That address range is assigned for ISP and corporate usage through RIPE. Wouldn't one of the reserved private network blocks, such as 10.0.0.0/8 have been a better choice?
Topic

Change starting address Pixel Net 4

jbaily ·
I am wondering if someone could help me figure out a problem. I have a pixel net 4, which I know is older, that I would like to use. The 4 ports use Uni 0 - 3. I would like to change the starting address for each port starting with Universe 5. I have done it a while ago with DMX Workshop, but I cannot seem to catch lightning in a bottle twice. Does anyone have a solution for this issue? FWIW - I am connecting the Pixel Net through a switcher to a Gio@5. Thank you for your time. J
Reply

Re: Change starting address Pixel Net 4

Ricardo C. ·
In DMX Workshop, Go to Node List, and under the Node Status tab, the Pixel Net 4 should appear with its IP address listed Right-click and expand all menu for the Pixel Net 4 Under Output menu, right-click and select Configure on the output you want to change. Under the Port tab, input the desired universe.
Topic

Luma_Net Connection

ReyDej56 ·
Working on fixing/replacing Luma-net/Leviton 404CP Control panels. Having difficulty of programming from the panels, how can I use Show Designer2 to reprogram the lighting scenes program that are set already to the 404CP?
Reply

Re: Luma_Net Connection

Jingles8302 ·
The only way i can think of is if the panel you are programming into has DMX in and can record DMX. I imagine the SD2 is just to program once and then the other gear you mentioned is a controller panel/rack system?
Reply

Re: Luma_Net Connection

ReyDej56 ·
I think it relates to between DMX and Elation SD 2 setting with Luma-net 404CP, I was following the programming instruction from the 404, but perhaps it's also the setting within Elation program to accept 404. Thanks!
Reply

Re: Luma_Net Connection

Jingles8302 ·
The SD2 can't accept anything IN except midi. so any non-standard dimming systems with Multiplex where there is extra voltage on the line should not be used. I think maybe perhaps your questions should go to NSI as the SD2 is a standard DMX 512 controller console and you are having issue with the 404.
×
×
×
×