Tagged With "Display for Sixpar"
Reply
Re: Six Par and Bar Series Fixture Firmware
It seems the display options have changed in Sixpar firmware versions 12 and above. Could someone please clarify what each option in the display menu does currently? The manuals on the Elation website seem to be for earlier firmware versions. Thanks!
Reply
Re: Compu Show and Pixal Bar
Ok thats what Im looking for. NO video just great visual effects with text to start out with at first. I am getting 16 Pixel Bars next week along with a SDE box. Thanks for the help and for the profiles. Just ordered 24 SIXPAR 100s and 4 Rayzor Beam2Rs today. Cant wait to get them into the mix.
Topic
Sixpar 300is- Default
The Sixpar 300is have a 'Default' setting on the menu but nowhere in the manual does it mention it? What does it do? How is it used? Graham@APS Ltd
Topic
sixpar 200ip auto lock
Hi, I have a sixpar 200ip that locks automatically after 30 seconds, then I have to unlock it. Is there a way to disable this?
Topic
SIXPAR 200 AND 300
I am new about lights I bought several SIXPAR 200, and they are all locked. I did all the manual procedures for unlocked, but it didn't work. What should I do?
Topic
Six Par and Bar Series Fixture Firmware
Update Tool: CUE Software Uploader SixBar 1000ip_V1.07 Final SixBar 1000_V1.17 Final SixBar 500_V1.13 Final Sixpar 100_V1.13 Final Sixpar 100ip_V1.13 Final Sixpar 200_V1.12 Final SixPar 200ip_V1.15 Final Sixpar 300_V1.12 Final SixPar 300ip_V1.15 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...
Topic Featured
Emulation & Emulation PRO Fixture profiles
Elation Lighting XML fixture library file. This XML contains all of the Elation Lighting products as listed below. This list was last updated Feb 27 2017. If you do not see a fixture you need, please email Support@elationlighting.com and request it. ACL 360i Arena Par Arena Par Zoom Arena Q7 Zoom CMY zoom 575 ColorTone 100 ColorTone 50 Colour 5 Profile Colour Chorus 24 Cuepix Batten Cuepix Blinder WW2 Cuepix Blinder WW4 Cuepix Panel Cuepix Par 300 Cuepix Strip TRI Cuepix Strip WW Cyber Pak...
Topic Featured
Elation Fixture profiles for GrandMA2
ACL 360 Bar ACL 360 Matrix ACL Bar Arena Par Zoom Artiste Dali Artiste Davinci Artiste Picasso Artiste Van Gogh Chorus Line 16 Colour Chorus Dartz 360 DTW Blinder 350IP DTW Blinder 700IP ELAR Quad Panel eMotion Fuze Par Z120 IP Fuze Wash 575 Fuze Wash Z120 Fuze Wash Z350 Level Q7 Paladin Platinum 1200 Wash Platinum BX Platinum FLX Platinum Profile LED Platinum SBX Platinum Seven Platinum Spot III Platinum Wash 16R Pro Platinum Wash ZFX Pro Proteus Beam Proteus Hybrid Protron 3K Color Protron...
Topic
Elation Sixpar 200
Ok I just purchased 4 of these. I cant find info any where how these work. If I run red at 100%. Are all 12 leds at 12 watts each for a total of 144 watts of red ???? I seen a adj 12 x 12 watt fixture that has 6 / 2 watt leds in each lens. When red is at 100%. All 12 leds are only at 2 watts each = 24 watts of red ?????
Reply
Re: Rayzor Beam2r and Sixpar100 Profiles
Here you go, sixpar 100 all channel modes: https://www.dropbox.com/s/pneo...XPAR%20100.ssl2?dl=0 Rayzor 2r all channel modes: https://www.dropbox.com/s/jse2...0Beam%202R.ssl2?dl=0
Topic
Very Hot Weather and Outdoor Concerts
Hello- I am new to outdoor set up/outdoor venue elements. A theatre I work for has done a couple of small outdoor concerts and weather was not a concern. This weekend the weather is supposed to get up to be around 100-105 degrees Fahrenheit. I will be needing to set the lights up Friday eve or Saturday morning. We have zero shade on one side of the stage with my Elation Fuze z120 IP and Sixpar 300 IP lights from about 11am until about 5:30pm. This puts the lights in the direct sun for about...
Topic
Six Par Z19IP Fixture Firmware
Upload tool: C-Loader or USB Stick Six Par Z19IP Firmware V 1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
Sixpar 300IP LED Issues
Hello. I am always wanting to learn, particularly about issues with LED lights so I can learn to sorta diagnose. Attached is a video of one of the symptoms of the Sixpar’s issue that it is having. The first symptom it showed was with all LEDs on creating white, half the the LEDs (Green and blue) would flicker and flash on and off, or just stay off. Shortly after, the blue would barely turn on at full, it flickers, then one side would flash on and off as the video shows. What is causing this??
Reply
Re: Sixpar 300IP LED Issues
Thank you. Is there anything in particular that can cause the driver to go bad?? I have another Sixpar 300IP showing the first symptom I mentioned.
Reply
Re: Sixpar 300IP LED Issues
It is more likely an individual LED diode rather than a driver going bad. The reason this usually happens is one of the colors in a 6 chip diode dies open, meaning it won't pass current. Each side of the fixture is wired in series. In the video, when half of the diodes go out, those 9 diodes are wired in series and one is bad (intermittently) and if that happens, it behaves like old Christmas lights and takes out the others. Even though there 9 chips per half, each chip has an individual LED...
Topic
ARENA ZOOM Q7IP barn door options?
Do any of the gel holder/barn door combos from the Sixpar series (or any other fixture) fit the ARENA ZOOM Q7IP ?
Topic
Help!
I am running 5 Sixpar 200's daisy chained together through Magicq. I can get three of the lights to work. They are all on 12 channel, and are set to the addresses specified by magicq . . . . I'm a noob and need help! Thanks
Topic
CUE Software Uploader
Is the C-Loader the direct replacement for the Cue Uploader? I need to update some non-IP Sixpar 100's.
Topic
Does this mean the Sixpar 200 is dead?
I have nine Sixpar 200 fixtures from UsedLighting.com so they were not new. They've been flawless for two years. Out of nowhere, one unit will only shine low intensity white when power is turned on (we use the circuit's breakers to power on and off to minimize where and tear). The Sixpar does not respond to any DMX commands. The DMX is terminated. Other fixtures downstream on the DMX chain work fine. I can go into the menus and the Sixpar responds correctly to the various settings. Any ideas...
Reply
Re: Does this mean the Sixpar 200 is dead?
Good morning, does the display flash when data is present, if so then you may have a bad dmx driver. The driver is mounted on the display meaning you would have to replace the display. DISPLAY PCB FOR SIXPAR 200 (elationlighting.com)
Topic
SIXPAR 100
I have 2 of my Sixpar 100 lights that are flashing "Update wait" on the screens. I can not find any updates. Does anyone have any suggestions?
Topic
Display for Sixpar 100ip and 200ip
Hello! I have been working on cleaning and ensuring my Sixpars are functional at my work. I was given a solution to clean the instruments (it had ammonia) and I used it to clean them with permission from higher ups. I’m finding that my display screens are blinking specifically on the dmx address screen when they were fine before. Is there anything I can do to try and fix this, or did I just destroy the display and will need to order a new one?
Reply
Re: Display for Sixpar 100ip and 200ip
To clarify, the power still works. I’m not getting any signal for the dmx.
Reply
Re: Display for Sixpar 100ip and 200ip
Greetings, when the display is blinking this means there is not data... Please confirm data is being sent from the controller... if there is data present and the display flashes then you have blown the DMX driver and will need to replace the display.
Topic
Profiles For Show Designer 3
Hi all, Trying to find or make Show Designer 3 profiles for the following lights: Elation SIXPAR 200 Martin Rush MH2 If anyone could supply these or set me on a course to creating them, I would so appreciate it. Thanks!
Topic
First fixture in DMX chain keeps getting fried
We have been experiencing this problem ever since moving into this venue. If anyone has any insight we would greatly appreciate it. We have had an electrician come look and install a UPS in case this was a power surge issue but it is still happening. Our house lights are the color pendant series. We have a second, smaller room for other events that has newly installed sixpar 100's as the house lights. In the main room (with ther color pendants) the first fixture in the DMX chain continually...
Topic
SIXPAR 300
Cannot get the RDM to talk with my controller. Is it possible that Net3 needs the RDM ID changed? the controller can briefly see the fixture but then syncs out for a time then syncs back on but not long enough to see what the fixture is experiencing, ie. temperature etc.
Topic
Six Par Series Fixture Firmware
Update Tool: CUE Software Uploader SIXPAR 100 V1.16 What's new: Resolved bug with temperature fluctuations. SIXPAR 100IP V1.17 What's new: Update Required due to change in IC Chip, Backwards Compatible. SIXPAR 200 V1.16 What's new: Resolved bug with temperature fluctuations. SIXPAR 200IP V1.20 What's new: Update Required due to change in IC Chip, Backwards Compatible. SIXPAR 300 V1.14 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/...
Topic
SIXPAR 200 Display PCB connector burned
I have 9 fixtures and love them. However, I recently had one that stopped responding to DMX and glowed a dim white when powered up. I know from the past this is a bad Display PCB. After replacing it with a new one, it still behaved the same way. When disassembled, I noticed the LED connector had burn marks on two pins ( see attached) . I cleaned and scraped them and the fixture worked fine. I noticed this connector had an extra heavy dose of red wax and some of the wires were loose requiring...
Reply
Re: SIXPAR 200 Display PCB connector burned
Hello there i do hope all is well and you are doing okay. In regards to this, please reach out to us via the support email Support@Elationlighting.com and we can proceed from there. Thank you