Skip to main content

Tagged With "Blizzard-Lighting-Bladerunner-Rgbw.html"

Everything
Reply

Re: Scene Setter 48

geek3 ·
Did you find one? also where do you get a case like this for the light boards? (bottom Right Pic) http://scranton.craigslist.org/msg/953649891.html
Reply

Re: Using NSI ND4600 with DMX Op Pro

jackp ·
Thank you. Will this work? http://www.dmx-tools.com/D1_FLYER1-16-2006.html
Reply

Re: convervision from microplex to dmx

elationpro ·
Jack P Posted 01 September 2010 04:01 PM Hide Post Thank you. Will this work? http://www.dmx-tools.com/D1_FLYER1-16-2006.html
Reply

Re: Need Blizard Bladerunner RGBW driver for 14 chan

Jingles8302 ·
Do you need a profile for one of our controllers products for this light? If so which one?
Reply

Re: Need Blizard Bladerunner RGBW driver for 14 chan

Journey Pastor ·
We are using Elation Emulation dmx software.
Topic

Cameo Flat Par RGBW 7x4W

Skorpio31 ·
Hi Leute, wie bekomme ich ein Fixture für den CFP RGBW ? Kann mir jemand hier im Forum helfen oder muss ich mich an Elation wenden? MfG Chris Hi guys, how do I get a fixture for the CFP RGBW? Can someone help me here in the forum or must I turn to Elation? Kind regards Chris Cameo_DMX_Controle_Table.pdf
Topic

Blizzard SnowBank profile

ssmlighting ·
I need profiles for the Blizzard SnowBank (7ch)[http://blizzardlighting.com/products/led-effects/item/212-snowbank]and Chauvet Intimidator Spot 150 (6ch & 11ch) [http://www.chauvetlighting.com/intimidator-spot-led-150.html]for the SD2CF Thanks.
Topic

Anyone has any idea on why this MAX chip seems to affect my power supply section?

helenwang ·
Ok, I'm completely puzzled by what is happening to my LM317 power regulator( http://www.kynix.com/Detail/799868/LM317.html ) adjust pin voltage. Here is the schematic of the power supply section of my PCB that distribute the 3.3v (VDD) to the microcontroller while other components use the 5.0v (VCC) directly from the connector (J14 and J13 are test pins on the PCB). So far so good. I get 3.3v distributed to my microcontroller no problem and 5v to my leds and LCD. Trouble arise when I connect...
Topic

Need Blizard Bladerunner RGBW driver for 14 chan

Journey Pastor ·
link: https://www.manualslib.com/manual/893145/Blizzard-Lighting-Bladerunner-Rgbw.html?page=5#manual
Topic

Need Profile for Daisly Light 3W RGB Can

ryanhermproductions ·
Hello, If I could get a profile for that Daislylight LED par64 that would be amazing! I use compulive. http://www.daisylight.com/led/LP-64-177.html is a link to the manual. They are 6 channels! Thanks Elation, you guys rock ! -Ryan Herm Productions ryan@hermproductions.com
Topic

Profile Needed - Chauvet Vue 6.1

ironcladsoundandlighting ·
The one that came in Emulation appears to be bad. http://www.chauvetlighting.com/vue-61.html My event is on Thursday, thanks in advance. jondorner@gmail.com
Topic

Need Proflie for Chauvet Intimidator Spot LED 150

jasonpkboyd ·
I am requesting the profile for this fixture. I tried to use the intimidator 150 (non LED) and it is not the same. Here is the link to their webpage to show the exact fixture. http://www.chauvetlighting.com...or-spot-led-150.html Thank you!
Topic

Need profile for VEI Novascan 250-1

underwaterjon ·
Couldn't seem to find one anywhere. Here's a link to the manual with the traits: http://www.visualeffectsinc.co...s/novascan250_1.html Thank you
Topic

Custom Profile Request: Chauvet / ADJ

servantguy ·
Hello friends, I have several Magic 260s that need some Chauvet and ADJ profiles loaded. Could someone please help create a customized master file for me? Here are the fixtures we have and links to the manual/resources pages: The DP-415 Dimmer/Switch Pack: http://www.americandj.com/Prod...ers&txtSearch=dimmer The MegaBar 50 RC http://www.americandj.com/Prod...ry=L.E.D.&txtSearch= The Mega24 RC http://www.americandj.com/Prod...ry=L.E.D.&txtSearch= The Slim PAR 64...
Topic

Profiles

bpk89 ·
Hello, I just ordered a Magic 260 (no ulink) and will need some profiles for it and was hoping to hit the ground running when it comes in the mail. I will need profiles for: Chauvet Colorrail http://www.chauvetlighting.com/colorrail-irc.html Chauvet Slimpar 38 http://www.chauvetlighting.com/slimpar-38.html and Hurricane Haze 2D http://www.chauvetlighting.com/hurricane-haze-2d.html Thanks!
Topic

Need Profile Please

butters ·
Chauvet Intimidator Spot LED 350. Thanks! http://www.chauvetlighting.com...or-spot-led-350.html
Topic

Irradiant OBY-5 Personality Profile

juise15 ·
Hello, I'm going to be setting up a show with a few Irradiant OBY-5 moving fixtures. Is there a personality profile available for this unit? http://www.irradianthq.com/oby-5.html
Topic

Profile for Chauvet

synimagic ·
Looking for an Emulator profile for a Chauvet Intimidator Scan LED 300 http://www.chauvetlighting.com...or-scan-led-300.html Manual link is also on that page. Synimagic purchasing2@synimagic.com P.S. I wish there was a master depository for prifles made already. I will also need one for an ADJ X SCan LED -- not sure if it is there arleady or not.
Topic

profile for Longman Light

lisa10584 ·
Longman Light LED Moving Head Light Loby 36 http://longmanlight.com/en/Product-151.html
Topic

Fixture Profile for Look Solutions UN-0371 Unique 2.1 Hazer?

sunspotwendy ·
Is there a fixture profile for the following? Look Solutions UN-0371 Unique 2.1 Hazer http://www.fullcompass.com/product/387906.html I would like to add it to my show. Thanks in advance for any help!
Reply

Re: Dimmer Packs

geek3 ·
Yeah, And I Defenatly can't complain about the price of them. The quality I would I assume is ok, As I never had a problem with the chauvet dimmer pack we have at church There Dmx console on the other hand I can say the same for, they have some issues. And is there any chance you could enable HTML in my sig?
Reply

Re: Chauvet VUE 4.1

jlivings ·
Hi Ken The Profile works Great, Thanks. I Promise to only Buy ADJ or Elation Fixtures in the future. We are a non profit, and several VUE 4.1 were donated to us. http://www.leapafterschool.com.../About_L.E.A.P..html Regards, John
Reply

Re: Stage Ape Hampster n DP415 n Colorverge

thex-man ·
Well you are gonna love this guys. Here is the answer that I got from Stage Ape= It sounds to me like you have an old LED-86. The Hampster and the LED-86 are two different units with different dip switch settings. The LED-86 that you have can be found in our discontinued section at the bottom of our website. http://www.stageape.com/pages/led86.html Cheaplights.com is our American distributor and they only sell the "MY DMX" software. There are to many different brands of DMX software for us...
Reply

Re: DMX and non-DMX

rizzer ·
Sorry - my html seems to be a bit rusty - the link in tha above post is: http://cgi.ebay.com/Elation-DP-415-4-Channel-DMX-Dimmer...QQrdZ1QQcmdZViewItem it is for an Elation DP-415 4 Channel Dimmer
Reply

Re: Need profile for HES SS 575 CMY ZOOM

randallcook ·
I just get a DROP BOX page with HTML? Where/how do I get the file?
Reply

Re: Platinum Spot 5r blowing bulbs

spendergrass ·
I touched only the ceramic base. Obviously touching inside the reflector or the bulb itself is bad. What about the outside case of the reflector, the metal cone above the ceramic base? Is it ok to touch? I did reset the time clock. I was also curious about the four screws holding in the lamp. The manual states that no calibration is necessary. I've had trouble in the past twisting out the old lamp. Loosening the screws is necessary. I've always kept track of how many turns I loosened so I...
Reply

Re: Problem with DMX Operator Pro

Don ·
https://color-sage.com/par-can-cs-p170d-ip65.html I couldn't find a link to the manual, but this is the product. I have scanned the manual. Don
Post
×
×
×
×