Tagged With "Z350 Z120"

We are currently using ShowXpress software so I am having to build my own profiles for all my new Elation lights. I am looking for a list of all the 64 Color Presets to properly name them, as well as the 13 Color Macros. I've searched on here as well as Google and haven't been able to locate the information. Thanks

Elation Lighting XML fixture library file. This XML contains all of the Elation Lighting products as listed below. This list was last updated Feb 27 2017. If you do not see a fixture you need, please email Support@elationlighting.com and request it. ACL 360i Arena Par Arena Par Zoom Arena Q7 Zoom CMY zoom 575 ColorTone 100 ColorTone 50 Colour 5 Profile Colour Chorus 24 Cuepix Batten Cuepix Blinder WW2 Cuepix Blinder WW4 Cuepix Panel Cuepix Par 300 Cuepix Strip TRI Cuepix Strip WW Cyber Pak...

ACL 360 Bar ACL 360 Matrix ACL Bar Arena Par Zoom Artiste Dali Artiste Davinci Artiste Picasso Artiste Van Gogh Chorus Line 16 Colour Chorus Dartz 360 DTW Blinder 350IP DTW Blinder 700IP ELAR Quad Panel eMotion Fuze Par Z120 IP Fuze Wash 575 Fuze Wash Z120 Fuze Wash Z350 Level Q7 Paladin Platinum 1200 Wash Platinum BX Platinum FLX Platinum Profile LED Platinum SBX Platinum Seven Platinum Spot III Platinum Wash 16R Pro Platinum Wash ZFX Pro Proteus Beam Proteus Hybrid Protron 3K Color Protron...

Hello, I do lighting design for my school, and am working on recommendations for LED upgrades. I have been looking at the Fuze Par Z120 IP, and need to calculate the diameter of light one fixture would produce at a certain zoom level given its height off the ground (this way I know how many lights my school would need to wash the entire stage). I looked at the Photometric Data for that fixture, and would like some explanation as to what the values mean. More specifically, what do the values...

So I have four Z350's, eight Z120's, and ten Z175 Pars. All of these lights are right at 2 years old now. This past week I have 2 lights doing the same thing and I can't figure out why. Could totally be user error. One of the Z350's and 1 of the Z175 Pars are working normally EXCEPT they will not "strike" or emit any light at all. They both zoom (you can hear it) and the 350 pans and tilts just fine. Everything works except the LED chips. Got any ideas? Console is a MagicQ PC with a Maxi...

Hello- I am new to outdoor set up/outdoor venue elements. A theatre I work for has done a couple of small outdoor concerts and weather was not a concern. This weekend the weather is supposed to get up to be around 100-105 degrees Fahrenheit. I will be needing to set the lights up Friday eve or Saturday morning. We have zero shade on one side of the stage with my Elation Fuze z120 IP and Sixpar 300 IP lights from about 11am until about 5:30pm. This puts the lights in the direct sun for about...

Firmware Tool Required: C-Loader II Fuze Wash Z120 Firmware V1.18 This update fixes an issue where after a hard reset, some units would lose positioning. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...

hi I have an Elation Show Designer 2 and I read in the manual about loading fixture profiles from elationlighting.com but I don't see any of the fixtures I have in my show on their list. I have a CF drive and ready to download but need to know where to go to download my specific files. I currently have Chauvet DJ Slim Par 56s, Chauvet Slim Par 64 RGBA, Chauvet DJ Intimidator Spot 260, Blizzard LB Hex RGBAW+UV LED Wash Light, Chauvet DJ 6spot RGBW, and ADJ Z120 RGBW Led Par. if anybody can...

I forgot to attach a light

Firmware Tool Required: C-Loader II Fuze Wash Z350 Firmware V2.1.13 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/ Backwards compatible/ same functionality as previous. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...

I trying to address my Fuze Z120 fixtures to the second universe but the fixture will not allow me to assign an address above 498. Does anybody know the secret here?

We have six (6) of these fixtures installed since 2017, and have recently sent all 6 back to Elation for repair (had two started dying within weeks of each other, so just sent all 6 in to have the identical replacement process done preemptively). three (3) of the six came back from Elation with their "home" position 90 degrees off (the yoke perpendicular to the menu screen), while the others remain as they were (home is yoke parallel with the menu screen). Console/control is JandsVista V3 A...

@elationservice Any suggestions would be welcomed!

We have six (6) of these fixtures installed and have recently had to replace one. The "home" position 90 degrees off (the yoke perpendicular to the menu screen). On the old units that were already installed (home is yoke parallel the with the menu screen). I am running Grand MA interface. I know it has to be something on the light as I switch DMX address with the light next to it and it worked as expected. So I am at a loss. Any help would be awesome. I called Elation and the service person...

When starting up my elation fuze wash z120 fixture it gets stuck in a pan, has a lot of noise and is not controllable. It does this most times (not all the time) and it doesn't matter if it is connected to dmx or not. I took it to service but they could not help. What to do? Does anyone hva experience with this problem. My fixture has had it since it was new...

We have several Fuze z350 wash fixtures at the venue I work at. When they are controlled by the house Avo Titan Mobile, they work flawlessly. However, when a touring act rolls through with a GrandMA console, and they strobe the fixtures vigorously, the intensity may randomly decide to stop working. In rare instances, the fixture will get stuck on, and in place. Only a hard reset from the breakers fixes this problem. Tours have told me they have encountered this problem with these fixtures...

While I'm locating the C-loader, can you give me some clue as to why this glitch only effected MAs talking to these fixtures? This is something that has been hurting my head as an Avo guy. Thanks in advance! - Bird

Personally speaking i've had this happen on my Fuze Z120s running an Obsidian NX2 console before as well, its mostly a bug in the strobe controller and I can confirm the firmware upgrade fixes it. It's not just Ma and AVO its a fixture firmware issue.

Thanks for that information ! I never managed to trigger it with my Avo, and I definitely use the strobe function for metal show. I'm just glad to hear this will fix the problem with certainty. You are my hero.

Hi, it sounds like a firmware upgrade is needed for the fixtures, email Firmware@elationlighting.com and tell them the current firmware version of the Z350s you have now and they can advise on a newer firmware that should fix this issue.

I will try this. Trying to source a C-loader now.