Tagged With "Jands L5"

Hi sorry for the delay in this, let me look into the different firmware versions and I or someone on our team will reply with an answer ASAP. Thanks!

Hi, Please shoot us an email to Firmware@elationlighting.com and tell us you've got the Enode 2 and you want to upgrade the firmware and we will send you the files and instructions, I do not know if you need a special firmware upgrade tool, but they will tell you that. Sorry again for the delay.

I have 10 enode 2's deployed in my church. We are running sACN with a Jands L5 console. I have 5 nodes on firmware version 1.3 that have no problems. I have 2 node that are version 1.4, and 3 that are 1.5. The 1.4 & 1.5 work fine when they are first plugged in, but the next day they do not respond (or respond slowly) to any dmx commands (we leave the nodes running 24/7). The activity light is slow on them also. If I unplug the cat5 cable and plug it back in everything works fine again...

So I have a sacn network setup with 10 nodes running. It is a combination of Elation Enode2, Chauvet Dmx-an 2, and ETC Net3 Gateway. We are using a Vista L5 running sacn with no problems.....until we try to use a node backwards to feed into a universe. Some shows come into our space and just want to use an analog DMX for universe 1 (house lights mainly). When we set up a node to work backwards we get the other nodes pulsing (only the ones on universe 1). If we set a node up backwards on any...

If this is the wrong forum please move. I have 4 Platinum 1200 Wash fixtures, all set to the same profile and in dmx mode and running through a Jands L5 using extended profile. Two fixtures work great, no issues and have been in services for years. The other two are not installed permanently. I put them in service for a special event and when powered on, pixels 8-19 will not fire. I tried manually testing and in test mode and they will not work. The fans spin up like the LEDs are firing but...