I have 10 enode 2's deployed in my church. We are running sACN with a Jands L5 console.

I have 5 nodes on firmware version 1.3 that have no problems.

I have 2 node that are version 1.4, and 3 that are 1.5.

The 1.4 & 1.5 work fine when they are first plugged in, but the next day they do not respond (or respond slowly) to any dmx commands (we leave the nodes running 24/7). The activity light is slow on them also. If I unplug the cat5 cable and plug it back in everything works fine again for another day.

I also have chauvet dmx-an2's, I can plug these into the same jacks and everything works perfectly.

What is wrong, should I just replace them all with the chauvet's? 

Original Post

Hi sorry for the delay in this, let me look into the different firmware versions and I or someone on our team will reply with an answer ASAP. 

Hi, Please shoot us an email to Firmware@elationlighting.com 
and tell us you've got the Enode 2 and you want to upgrade the firmware and we will send you the files and instructions, I do not know if you need a special firmware upgrade tool, but they will tell you that. 
Sorry again for the delay. 

Add Reply

Link copied to your clipboard.