Tagged With "profile"
Reply
Re: New profile for SD3
Your profile request was received. Please note due to amount of requests we receive it may take a few days before your request is completed. If you have any further questions feel free to email service@elationlighting.com
Reply
Re: Elation Satura Profile G5UFan1 Er
Hey @Michael Dimsey , I would check number 5 board. That board would be the PCB with 7 Drivers Located towards the LED Source. It should have a sticker labeled HY1324/5U01, or the board should have a PCB1127-0-C. That fan should go to that board and connected to 5JB1. I would just follow that connection to the fan.
Topic
New profile for SD3
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic
Blizzard HOTBOX exa Profiles
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic
R2x beam and spot profile needed
i need a profile for both rouge r2x beam and spot for compu live please!
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Needing two profiles to add to Emulation software.
Needing profiles built for Chauvet Intimidator Spot 110 10 w and Blizzard Lighting Lazer Blade G. I have attached the manuals with the information. Any help would be greatly appriciated!
Topic
Fixture Profile for American DJ Focus Spot 3 moving light
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic
Elation Satura Profile G5UFan1 Er
Hello, Can anybody help me locate g5UFAN1? My fixture is showing an error and I would like to try to replace the fan. Thank you!
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic
Colour 5 Profile Fixture Firmware
Upload tool: E Loader III Colour 5 Profile Firmware V1.0.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fixtures for GrandMA3
Hi Our event hall buys Fuze Profile, Fuze Wash FR and Fuze SFX. We have a GrandMA3 Light, Unfortunately I have not found any fixtures for the MA3. Does anyone know where I can find some? Thanks a lot Jan
Reply
Re: Fixtures for GrandMA3
You can use MA2 Fixtures and convert them via Export to MA3 Fixtures. I think there are some Videos in the Web who are explaining how that works.
Topic
Elation 8 FC Fresnel profile and Fuze Spot
I have received these beautiful new units and yet there is no personality that incorporates the Mint color. This is a huge disappointment. I have sent quite a few emails to tech support and staff but have not received any reply. They need to send ETC a color calibration for this unit so the fixture operates correctly. As of now, I have dropped the Mint out of any color picking which seems a total waste.
Topic
Fixture Profiles for Chauvet Fixtures
Can we find Profiles for Emulation ver 1.4.3 for these ChauvetDJ Fixtures? 4 Bar Quad 6 Spot Colorband T3BT Geyser P5 we've attached manuals Thank you!!!
Reply
Re: Fixture Profiles for Chauvet Fixtures
Hi Joe, unfortuetly we have discontinued Emulation a few years ago. but if you email me I can tell you where to find the most up to date software version as well as profiles. James.keeley@elationlighting.com
Topic
Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi - I'm using a Martin M2GOHD - which I understand is now supported by Elation who market the controller as the NX2? I am seeking fixture profiles for a number of Martin fixtures: Martin ELP CL LED profile Martin Rush Par3 RGB Martin Rush Batten 1 Hex I can't find fixture profile downloads on the Elation webiste or anywhere else? Any pointers please on this would be greatly appreciated ASAP as I am on a very tight schedule to get the show programmed and would rather avoid having to create...
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi, try the obsidian website. It’s all in the 4.4 download. www.obsidiancontrol.com
Topic
Fuze Profile CW Firmware
Upload tool: C-Loader or USB Stick Fuze Profile CW Firmware V1.0.10 What's new: Improved cooling. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Thank you so much for the swift reply - really appreciate it. The M2GOHD desk I have inheritted is running M-Series software 3.70.885.0 which as far as I can tell is the last M-Series OS version released? I am extremely nervous about trying to change this to Onyx at this stage. We are a community organisation and were donated the desk 'as is' and don't have the funds or the knowledge to start getting into OS upgrades.😕 On the Obsidian Control website (great tip thank you) however I did find...
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Hi, all you need to do is place the .EXE installer onto a USB stick, plug it into the console and run the fixture library update from the settings menu on the console. You cannot import individual fixtures from the exe, you need to let it update the whole library. This is the way it has always been done.
Reply
Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)
Thank you so much - managed to get to the Fixture LIbrary update via the Tools menu and worked a treat! Really appreciate the swift advice! Thank you too for replying to my other post re. training - will give the FB group a try. Cheers,
Topic
U`King Moving Head DJ Lights with 60W 8 GOBO
I'm looking for a profile. Attached the manual. 16/18 channel profile thanks in advance
Topic
Fuze Profile Fixture Firmware
Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.0.15 What's new: Noncritical update due to IC change and global supply issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Reply
Re: Fuze Profile Fixture Firmware
Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.
Reply
Re: Fuze Profile Fixture Firmware
make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors
Reply
Re: Fuze Profile Fixture Firmware
I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.
Reply
Re: Fuze Profile Fixture Firmware
shoot me an email with your info.. gines dot gines at elation lighting dot com
Reply
Re: Profiles For Show Designer 3
Wow, thanks. That was fast. And, my mistake, it's not the MH2 I need, but the Rush MH1 Profile Plus profile. Let me know what you need for that. HJT
Reply
Re: Profiles For Show Designer 3
Email me directly the PDF of the DMX chart, also let me know what channel mode(s) you want. Jamesk@adj.com
Topic
Profiles For Show Designer 3
Hi all, Trying to find or make Show Designer 3 profiles for the following lights: Elation SIXPAR 200 Martin Rush MH2 If anyone could supply these or set me on a course to creating them, I would so appreciate it. Thanks!
Reply
Re: Profiles For Show Designer 3
Six Par 200: 12ch: https://www.dropbox.com/s/gd1c...0200%2012CH.sdf?dl=1 8ch: https://www.dropbox.com/s/0370...20200%208CH.sdf?dl=1 7ch: https://www.dropbox.com/s/z8ds...20200%207CH.sdf?dl=1 6ch: https://www.dropbox.com/s/wi0g...20200%206CH.sdf?dl=1 The Martin Rush fixture is not currently made. If you link us, we can make it for you within 3 business days.
Topic
Fuze Profile/Spot/Max Series Feature Request
Hi, All! Don't know if this is a forum post or an email, but I would like the ability to turn all of the fans on at full from the menu without having to get the fixture hot enough to turn them on. Right now it seems that the fan settings are referenced when the fixture determines that it is hot enough to have the fans turn on, but if I have the fans set to MAX, I want them to be spinning at max speed at all times and not just when the fixture thinks that it is hot. Otherwise, could we get a...
Reply
Re: Fuze Profile/Spot/Max Series Feature Request
Greetings, you are correct the fans are regulated, this is meant to minimize fan noise. also yes it is possible for an affected PCB to produce a "phantom" error as a result however you should be able to confirm Fan RPM via the menu and confirm fans are operational.
Topic
Omega-holder
I need to mount a Platinum Profile LED on an overhead grid, but I don't have the Omega-holders which shipped with the light. How can I acquire replacement Omega-holders?
Topic
FUZE MAX Profile
Uploader Tool needed: C-Loader Or USB FUZE MAX Profile What's new: - touch screen lock up bug solve - internal optimizations - prism reset optimized - RDM improved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs...
Reply
Re: FUZE MAX Profile
Greetings, can you tell me what software version you are on? this info is available via the display in Information.
Reply
Re: FUZE MAX Profile
Hello, I've noticed a little bug with this firmware. When the address is changed via RDM, the fixture will occasionally revert to its prior address once it is power cycled. For instance, we reset all of our fixtures to standard mode at address 1 in the shop, but occasionally when we pull them out to address them, some of the addresses are reverted to their old values in the 200s and 300s. Thank You
Topic
KL Profile FC Fixture firmware.
Uploader Tool needed: C-Loader Or USB KL Profile FC Firmware V1.0.6 What's New: Fade Optimized. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...