Tagged With "uploader"
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
SixBar 500 Firmware
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
ACL Bar 360 Fixture Firmware
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60IP Firmware V1.07
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
Paladin Cube Fixture Firmware
Uses C-Loader uploader tool. Paladin Cube Firmware V1.04 What's New: changed menu wording from Master/Slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
Artiste Van Gogh Fixture Firmware
Uploader Tool needed: E-Loader III or USB Artiste Van Gogh V1.3.3 What's New: -Master/Slave text changed to Primary/Secondary -Fan behavior optimized in "mute" mode to avoid led shut down. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct...
Topic
Volt Q5E Fixture Firmware
Uses E-Loader uploader tool. Volt Q5E Firmware V1.0.4 What's New: Change menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
Protron 3K Color Firmware
Uploader Tool Required: SNI Uploader Protron 3K Color Strobe Firmware V1.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic
eNode 8 PRO Firmware (VERSION 1 ONLY)
Upload Tool: SNI Software Uploader eNode 8 PRO V1.12 firmware (VERSION 1 ONLY!) THIS FIRMWARE IS FOR ENODE 8 PRO VERSION 1 UNITS ONLY! If you are not sure, contact us at the email listed below. Release notes: Devices should not do a full broadcast to 255.255.255.255, but rather to 2.255.255.255 RDM Support. Instructions for uploading Enodes You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant...
Topic
Seven Par 19IP Fixture Firmware
Upload tool: C-Loader or USB Stick Seven Par 19IP Firmware V1.113 What's New: Improved thermal protection. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic
Seven Par 7IP Fixture Firmware
Upload tool: C-Loader or USB Stick Seven Par 7IP Firmware V1.14 What's new: Improved thermal protection You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic
Fuze Par Z175 Firmware
Firmware Tool Required: C-Loader II Fuze Par Z175 Firmware V1.07 What's new: Improved thermal efficiency. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic
Seven Batten 72
Upload tool: C-Loader or USB Stick SEVEN Batten 72 Firmware V1.12 What's new: Fixes the following bug; after using KlingNet, DMX cannot control RGB. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If...
Topic
Fuze Wash Z350 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Wash Z350 Firmware V2.1.13 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/ Backwards compatible/ same functionality as previous. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...
Topic
Fuze Par Z120IP Firmware
Firmware Tool Required: C-Loader II Fuze Par Z120IP Firmware V1.16 What's new: Superseded IC Chips. (Not a critical update.) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Reply
Re: Fuze Par Z60IP Firmware V1.07
Hi I have one trouble about FuzePar Z60IP Firmware Update. I updated my FuzePar Z60IP Firmware, original V.1.03 to latest V1.07. I did it with C-Loader2, and got it successful, and It showed V.1.07 on fixtures display. but I operate with my console, each time move colors(RGBW) encorders up and down, FusePar flash, I can't get exact level and smooth fade. without console, I tried by manual mode, it also happened same flash. I wonder what I should do next. Could you advice me how to deal with...
Reply
Re: Fuze Par Z60IP Firmware V1.07
Greetings would you be able to send us a video?? if so please send to support at elation lighting dot com
Topic
KL Series Firmware
Uploader Tool needed: C-Loader Or USB KL4 Fresnel Firmware 1.09 KL6 Fresnel Firmware V1.10 KL8 Fresnel Firmware V1.10 KL Panel Firmware V1.10 KL Panel Release notes: IC changes due to supply chain shortages. Please note units with V1.10 cannot be downgraded, however earlier units can be updated to V1.10, however this is not a critical update. KL8 FC Firmware V1.05 What's new: Superseded IC chip. (Not critical update) USB Update Instructions You should not attempt uploading the firmware to...
Reply
Re: Fuze Par Z60IP Firmware V1.07
I tried V1.06 on your web already, but it didn't improve. If you have older version of firmware, V1.05,V1.04,V1.03, send me somehow. V1.03 is original I'll try them one after another.
Reply
Re: KL Series Firmware
Hello, I keep getting an Error when the second GSD file is uploading I already try updating it with the USB and with the C-Loader and I get the same problem please advice thanks in advance.
Topic
Artiste Monet Fixture Firmware
Uploader Tool needed: None, fixture has a USB service port. PLEASE NOTE THERE ARE 2 VERSIONS OF THIS UNIT V1.3.X & 1.4.X. 1.3.X SERIES CAN NOT BE UPDATED TO V1.4.X SERIES. FOR 1.4.X FIXTURES ONLY Artiste Monet Firmware V1.6.0 FOR 1.3.X FIXTURES ONLY Artiste Monet Firmware V1.3.7 Please ensure you read the included release notes document in the zip file. What's new: UPDATE NEEDED DUE TO IC SHORTAGE/CHANGES CORRECTED BUGS IN DISPLAY (IRREGULAR FAULT MESSAGES) OPTIMIZE RDM FUNCTION ADD...
Topic
Smarty Max Fixture Firmware
Upload tool: E-loader or fixture has a USB service port. Smarty Max Firmware V1.5.0 What's new: 1. Update needed due to new IC (global shortages) 2. Fixes “phantom “ errors in display 3. Optimizes RDM functions 4. Adds Ethernet updating function 5. Unit will register ballast error after 10 failed Lamp strikes. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Fuze Profile Fixture Firmware
Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.0.15 What's new: Noncritical update due to IC change and global supply issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Reply
Re: Fuze Profile Fixture Firmware
Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.
Reply
Re: Fuze Profile Fixture Firmware
make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors
Reply
Re: Fuze Profile Fixture Firmware
I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.
Reply
Re: Fuze Profile Fixture Firmware
shoot me an email with your info.. gines dot gines at elation lighting dot com
Topic
Proteus Rayzor 760 Firmware
Uploader Tool Required: Proteus Rayzor 760 Firmware V1.3.2 What's new: FIXES ACCELERMOTER ERROR IN V1.3.1 WHICH COULD CAUSE FALSE ERROR IN PAN /TILT CRITICAL UPDATE FOR UNITS WITH V1.3.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader...
Topic
Artiste Rembrandt Fixture Firmware
Upload tool: E-loader III or USB service port. Artiste Rembrandt Firmware V1.4.0 Update can be performed within V1.1.X, V1.2.X,V1.3.X,V1.4.X range, but can NOT be downgraded to V1.1.X, V1.2.X V1.3.X range. What's new: Corrected the multiple errors bug- shown irregular fault messages by display. Optimize RDM functions Added Ethernet updating function You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the...
Topic
SixBar 1000 Firmware
Uploader Tool Needed: CUE Software Uploader Six Bar 1000 Firmware V1.26 What's new: Resolved random turning off issue when using Artnet. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Topic
Rayzor 760 Firmware Updates
Uploader Tool Required: E-Loader Rayzor 760 Firmware V1.3.0 What's new: RELEASE NOTES UPDATED IC’S DUE TO GLOBAL SHORTAGES ADD ETHERNET UPDATING FUNCTION OPTIMZE RDM FUNCTION CORRECT MULTIPLE ERROR BUG ADD ARNET AND KLINGNET MERGE FUNCTION UPDATE CAN BE PERFORMED WITHIN V 1.1.X V1.2.X AND V1.3.X BUT YOU CAN NOT DOWNGRADE You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader...
Topic
Paladin Panel Fixture Firmware
Uses C-Loader uploader tool. Paladin Panel Firmware V1.2.0 What's new: Fixed display code bug and resolved a RDM addressing issue. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
Fuze Pendant
Firmware Tool Required: C-Loader II Fuze Pendant Firmware V1.10 What's new: V1.10 INTERNAL OPTIMIZATIONS V1.09 SOLVED BUG WITH PRIMARY/SECONDARY NOT WORKING CORRECTLY V1.08 SOLVED BUG WITH 17CH MODE ADDRESSING ABOVE 494 V1.07 SOLVED BUG WITH DISPLAY You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...
Topic
Artiste Davinci Fixture Firmware
Upload tool: E Loader III Artiste Davinci Firmware V1.4.0 What's New: UPDATED IC’S DO TO GLOBAL SHORTAGES NEW DISPLAY MENU LAY OUT EHTERNET UPDATING FUNCTION CORRECT BUG DUE TO IRREGULAR FAULT MESSAGES VIA DISPLAY You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you...
Topic
CUEPIX 16IP Fixture Firmware Updates
Upload tool: C-Loader or USB Stick CUEPIX 16IP Firmware V1.08 What's new: Internal Optimization/Network Delay Bug Resolved. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Reply
Re: CUEPIX 16IP Fixture Firmware Updates
I need version 1.06A. Is there a link to that somewhere?