Proteus Rayzor 760 Firmware

elationserviceLighting Designer

Uploader Tool Required:

Proteus Rayzor 760 Firmware V1.3.4

What's new: Critical update; fixes bug when updating to V1.3.3, calibration and time data is cleared upon updating.

You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com

11/6/192:18 PM

❤️ 0

Original Post

Replies sorted oldest to newest

drootbMember

Random parts of the update (e.g. 3u/4u/etc.) fail when doing the final part of the update. I have one fixture of the 5 I've done thus far be successful on all counts, but the other ones have failed one or more aspect of the update. Why is that?

TIA.

3/21/249:07 AM

❤️ 0

Jingles8302Admin

Hi, try the update on "Slow" mode and see if that helps the issue.
if not let me know in this thread and i will put you in touch with our service team directly.

3/21/2411:20 AM

❤️ 1

drootbMember

@Jingles8302 posted:
Hi, try the update on "Slow" mode and see if that helps the issue.
if not let me know in this thread and i will put you in touch with our service team directly.

Where can I select "slow mode"?

3/21/2412:56 PM

❤️ 0

Jingles8302Admin

Hi, email Alejandro at Alejandro.Garibay@elationlighting.com and he can assist you with this.

3/21/241:06 PM

❤️ 0