PARAGON S Updater Tool: E-Loader.
PARAGON S V1.5.1
What's New:
1.Aria Device Name corrected to AriaX2 as Irek confirmed.
2.Correct the unlock and lock display issue when Upon water contact with the display.
3.Optimize the PC lens and Fresnel lens to the high efficiency.
4.Correct the failures recorded by the ACT
5.Correct the advisories recorded by DMXter
6.The No DMX status(Fade to Black) function transition to Fade to Full on when DMX is plugged in. Not snaps to full on like before.
7.When the user left the channel 28 Standard Mode (Dimmer Delay Time)
turn ON then perform ‘Reset Fixture’ . DMX value dimmer delay time
*126-133 Start strobing
*134-141 Strobing and fixture outputting light during
Reset process.
You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Original Post