Tagged With "fixture profile"
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Maybe try using a scene instead of a preset. If I recall, presets usually require you to select fixtures ahead of time before calling. Scenes will simply include whatever you put in the scene. It's been a while since I worked with this so I don't recall every detail. It should be in the instruction manual though.
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Thanks SDMAN. I just tried using Scenes instead of Presets, but Scenes seem to have a few different problems: Scenes sometimes want to cancel each other when turning them on. (Does anyone know why this is?) This makes it hard to turn on multiple scenes simultaneously. When a scene fades out, it fades its channels down to zero, rather than letting them stay at their "color scene". I thought "HTP" would allow the highest value to control the channel, but apparently it means a controller will...
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Here's a possible explanation: I noticed my fixtures' DMX channels are assigned to multiple fixtures, at least one of which is a single "32 channel DMX" fixture, which therefore contains all my 4 fixtures (7 channels each, channels 1~28). I don't know why they did that, versus setting up correct separate 7-channel profiles, but perhaps that would explain why the Scene recalls seem to be interfering with each other!? Maybe I should erase the whole console and start over? Still trying to get...
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Do you have the manual on pdf? That should cover every detail as to how it works.
Reply
Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems
Ok Great! Thank you. I'll modify your profile and then you can take a look at it. Sincerely, Translated to German: Ok Great! Danke. Ich werde Ihr Profil ändern und dann können Sie einen Blick auf sie zu nehmen. Mit freundlichen Grüßen,
Reply
Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems
Ich weiß nicht verstehen. Ich brauchte nur die gesamte EUROLITE. xml, um richtig zu laden Ihr Profil in der Baumeister-Programm. Ich bin kein Software-Programmierer und nicht wissen, XML. Sorry.
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
SD3 Playbacks containing presets, selected fixtures question
Hello forum. My rock & roll venue system is 4 identical RGB fixtures (Opti RGB) with a SD3 console. 7 DMX channels per fixture. I'd like to have the Flex Faders control all 4 fixtures together, for a common "color scene" that I can change easily. Done already; just select all 4 Fixtures, and their 7 DMX channels appear automatically together on Flex Faders 1~7. Next I would like to have 4 separate Playback masters (in HTP mode!?) bring up "white" (R, G, B) for each respective fixture,...
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fixture Profile for American DJ Focus Spot 3 moving light
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic
Rayzor Q7 & Q12 Zoom Fixture Firmware.
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Plat 5r 17 chan profile help
I spent today programming scenses for 4 plat 5rs using the 17 channel profil on the product page. I'm trying to get the color scroll to snap to the next color instead of scroll but can't get it to respond. There is a button in the profile labels color snap yet it does not seem to function. Also is there a gobo snap?
Reply
Re: Need Profile for JB Systems Victory Scan
Here you go. A few notes about this profile. The custom section is where I decided to put the color wheel since I do not know if you are using split color mode or not. Also The blackout by color wheel and gobo wheel etc are also in the customer part. You can download the XML here from this link: https://www.dropbox.com/s/slf1...hvj8fb/JBSystems.xml In order for Emulation to see this new change in the XML you will need to place this XML file into the User folder. The file path should be this:...
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply
Re: Fixture Profile for American DJ Focus Spot 3 moving light
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic
ACL Bar 360 Fixture Firmware
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
DTW Bar 1000 Fixture Firmware
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60IP Firmware V1.07
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
Six Par Z19IP Fixture Firmware
Upload tool: C-Loader or USB Stick Six Par Z19IP Firmware V 1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
DW Par Z19IP Fixture Firmware
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
CUEPIX Panel Firmware
Necessary upload tool: CUE Software Uploader CUEPIX Panel Firmware V1.20 What's new: Changed the term Master/Slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic
Service for broken fixtures
I have two problematic fixtures that I ordered replacement parts for per the recommendation of one of Elations Service employees. Since then, they have arrived, I've replaced the parts, both fixtures are still not working and that person in the service department has not replied to me for weeks. Wondering what I need to do to get in touch with someone that can help. Thanks in advance.
Reply
Re: Service for broken fixtures
Greetings , please forward me your correspondence so i can review asap.. please forward to Parts@elationlighting dot com.
Topic
ACL Par 200 & 200IP Firmware
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Reply
Re: Cuepix Series Fixture Firmware
Split off CuePix Blinder WW2 and WW4 into their own thread with newer updated firmware: See here
Topic
Cuepix Series Fixture Firmware
Cuepix Batten Fixture Firmware V1.10 What's new: Improvements to the strobe timing. Cuepix Panel V1.18 What's new: Improved RDM information when using on a MA2 controller the RDM light will also flash. (More Cuepix series firmware coming soon) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader...
Topic
Protron Eclypse Firmware
Firmware Tool Required: A-Loader (SNI211) Protron Eclypse Firmware V1.5 What's new: The flickering image on 16bit master channel Using duration and rate set at 255 in manual mode to get a steady output Use only 75% of max output power in manual mode. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...
Topic
Volt Q5E Fixture Firmware
Uses E-Loader uploader tool. Volt Q5E Firmware V1.0.4 What's New: Change menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
Protron 3K Color Firmware
Uploader Tool Required: SNI Uploader Protron 3K Color Strobe Firmware V1.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply
Re: DTW Blinder 700IP Firmware
Buenos días, mi pregunta, yo tengo los dtw 700ip y estan en la versión 1.0.5 por solo hay en la paguina la versión 1.0.4
Reply
Re: DTW Blinder 700IP Firmware
Firmware V1.06 is available for download. V1.06 esta disponible
Reply
Re: DTW Blinder 700IP Firmware
buenas tardes me paso algo muy raro estoy actualizando los dtw 700 solo me estan prendiendo un solo lente sera q me puedes colaborar con este problema
Reply
Re: DTW Blinder 700IP Firmware
¿Ocurrió el problema con todas tus luces, o solo unas pocas? ¿Estaba el problema presente antes de la actualización?
Reply
Re: DTW Blinder 700IP Firmware
me pueden regalar la version 1.0.4 aver si puedo recuperar las targetas q no me estan funcionando
Reply
Re: DTW Blinder 700IP Firmware
Por favor envieme un correo electronico a ricardo.campos@elationlighting.com
Topic
Platinum Seven Firmware
Uploader Tool needed: E-Loader III or USB Platinum Seven Firmware V1.2.1 What's New: -Master/Slave text changed to Primary/Secondary You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
Fixtures for GrandMA3
Hi Our event hall buys Fuze Profile, Fuze Wash FR and Fuze SFX. We have a GrandMA3 Light, Unfortunately I have not found any fixtures for the MA3. Does anyone know where I can find some? Thanks a lot Jan
Reply
Re: Fixtures for GrandMA3
You can use MA2 Fixtures and convert them via Export to MA3 Fixtures. I think there are some Videos in the Web who are explaining how that works.