Tagged With "Satura Led Spot Pro"
Reply
Re: SD3 Playbacks containing presets, selected fixtures question
Thanks SDMAN. I just tried using Scenes instead of Presets, but Scenes seem to have a few different problems: Scenes sometimes want to cancel each other when turning them on. (Does anyone know why this is?) This makes it hard to turn on multiple scenes simultaneously. When a scene fades out, it fades its channels down to zero, rather than letting them stay at their "color scene". I thought "HTP" would allow the highest value to control the channel, but apparently it means a controller will...
Reply
Re: Roller Rink Wash with LED?
mikey wassup man? long time no see huh? how ya been. ok down to business. i would look at the design led 36 moving heads and a bunch of octo strips. what is ur budget? also look at the ELED blinder and the design panel and also the trackpod 81. jingles! and how i would mount em is put the heads towards the center of the rink and line the outside with either strips or trackpod 81's. my opinion. jingles!
Reply
Re: Roller Rink Wash with LED?
the lumen output of the design heads and led blinders is far too little for tryin to light a roller rink. trim height is 22 feet. those fixtures would get washed out instantly by all of the other lighting. But thanks for the try
Reply
Re: Roller Rink Wash with LED?
You might want to try Pulsar, or ChromaKinetics - they have some LED fixtures that have a good output. But, at that height, you're pushing a LED product quite far; why are you choosing to use LED?
Reply
Re: Roller Rink Wash with LED?
Hi Mikey, I have a customer who did a roller rink using Power Spot 250's and mainly the power wash 250 and cmy zoom 250 to color the floor. These would normally be ok for 20' distances, We actually recomend 250watt fixtures for up to 35' If you wanted to use LED's the DLED 36 delivers the best light output in LED using 36 1w luxeon LED's with reflectors. Best regards, JL
Reply
Re: question about the vision scan 250!
Hi Jingles, with the Vision Scan 250 out of focus you will still have a spot. However you need to remember that when you project gobos, a lot of times you will want them out of focus to give you different effects. But to answer your question you will still have a spot.
Reply
Re: Roller Rink Wash with LED?
Well...we do offer some LED fixtures now which have enough output to work in this type of environment - even IP 65 Rated - check out our Design Panel 72 - which has lumen output comparable to 250W discarge units in colors. Check it out... http://www.elationlighting.com/product.asp?ProductIDNum...9&cat=LED%20Lighting
Reply
Re: spot and wash 250
do u have any control over the one that is moving on it's own? is there any type of light that tells u it is recieving a DMX signal? also i just checked and if u have the power spot and washes the spots are 15 channels which would mean the second one should start at A016. and if this is so is it panning and tilting on it own or just one or the other. can u tell me what u have and at what addresses?? i need to know if they are power spots and washes or what. and also if the washes are cmy or not.
Reply
Re: Color mixing
well actually if u look around the web site a lot of them have the color mixing. here are a few of them. the power wash 250 and 575E,the design spot 575E, he power spot 700, design washes. and one or two more im sure. so u have a good array of choices from elation if u ask me. peace jingles!
Reply
Re: Color mixing
Hi Jonathan, I agree, I love the CMY color mixing feature. However this makes a lighting fixture a lot more expensive. Also, its dificult to fit all of these features in a light. So at Elation we are working on incorporating this feature into most of our lights. In the 250 range, if we incorporate CMY in a spot, it will be a bigger light, and be as much as a 575. So if you are already buying a big light, might as well bump up to a 575 fixture. The Elation Design Spot 575e, will be one of the...
Reply
Re: Compu Pro 06
I have the Elation Compu Pro 06. DMX out only. I thought it was the one that had DMX in and out but after I bought it I found out that this one is discontinued and I don't see a DMX in module for sale anymore. Bummer.
Reply
Re: gel color in 3d visulizer
For Compu Pro 06 You need to: 1. Open program and 3D visualizer 2. Enter build mode on the 3D visualizer 3. Select the fixture(s) u want to change the color of 4. Select the color on the pallet To help find the buttons...
Reply
Re: gel color in 3d visulizer
Thanks! and No Problem. I made a design for a theater I help with, but as it got closer to the show the use of Compu Pro was tossed and I never got rid of the program. Its not very detailed and no lights are actually ploted except the work lights, but it helped who it needed to so I guess its a sucsess after all! -Homeboy
Reply
Re: powerspot 250 lenses
Yo Tap I have 2 power spot 250 and have around 150 hours on them. What lense needs to be replaced after 2 years or does it go by operating hours ??
Reply
Re: powerspot 250 lenses
The instruction manual. I was going to comment, but felt its better for an elation rep to let them know which is right rather then my opinion. It says that then lens should be replaced every two years, but really it only needs to be replaced when it gets cloudy or breaks IMO. The manual is referring to the outer condensing lens, by the way, the one you can touch (but shouldn't) on the front of the head. Overall, you shouldn't need to replace any lens' on your power spot until it breaks. -Homeboy
Reply
Re: powerspot 250 lenses
Alright guys, I read throught the manual and could not find the lens replacement section. The last pages of the manual give a maintanane schedule saying that the outside optical lense should be cleaned monthly, but nothing about replacing lenses every two years. Help me out here. Here is a link to the manual: Power Spot User Manual Best regards,
Reply
Re: Design Spot 250 colour wheel
Hi Toby, I think your question was more in lines of a color wheel with replaceable colors. This was suppose to happen to the Design Spot 250. However as it stands this feature will not be available with the current Design Spot 250. We have talks of a Design Spot 250LX which may be available by LDI in November. Best regards, John Lopez
Reply
Re: Basics of Compu Live 06
You have to create a "switch" and name it follow spot. Then you need to select the "Ok and Edit" button. Look for a tab that says follow spot, and it should look like this. In this window you will see directions. Follow those directions.
Reply
Re: Basics of Compu Live 06
i did that, when i setup that switch it just moves to 4 different points in a cycle, the type of spot i was looking for is one that focuses on a certain point stays there until i move it. i was able to achieve this by setting a scene with with 2 fixtures pointed to the same spot and then moving them with the x/y preset button but i'm only able to control one fixture at a time. is there a way to have them both follow one mouse movement?
Reply
Re: Basics of Compu Live 06
You need to keep working with this follow spot section of the software. I have done it and it works good. The key is use all the points allowable. Keep working with this and you will get it going.
Reply
Re: Opto Branch
Hi, I happen to own one of these fine pieces. I can tell you that you can only use the four outputs with the green led to send a dmx signal. The thru plug is for connecting to an additional splitter. Tap
Reply
Re: "SNapping" Objects in 3D Visualizer?
once ur in construc mode u can right click a seires of truss or lights and move them all together or make em all in the same spot then spread them out one by one. don't know if this helps. jingles!
Reply
Re: Compu Live Questions
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply
Re: Compu Live Questions
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply
Re: Compu Live Questions
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply
Re: Design Spot 250 Fade Issues
i just tried what you suggested and still no luck... here are my steps first on the design spot page i set what i want.. so positions.. and colors..gobo's then i do the same for the other pages.. mostly LED lights once im done setting the scene up i click on the master page logo and press Save Scene.. using the scene fade toolbar i set my fade time.. to 2 seconds.. scene is programmed.. starting on init i click on the scene.. and this is when the strobing occurs.. it isn't a fast strobe..
Reply
Re: Compu Live Questions
John, Thank you and Jingles for your help. It all really helped! I actually went ahead and ordered the program about a week ago. Today was the first chance I've had to make sure what I had programmed matched what actually happened. I have figured out most of the bugs, but there is still one I can't quite get: My 4 moving heads (Design Spot 250) initialize to a different position than what is shown on the visualizer. For example, in reality when I look at the MH's they sit on the ground in...
Reply
Re: Compu Live Questions
Hi Matchless, Yes, I know what your talking about.. and you have a few simple modifications to work with. 1. The Design Spot 250 has two pan degree settings. The degree is the amount of spin from left to right that the light can move. It should be set to 540 degrees on the light to match the 3D window. 2. Once this is done, then on the 3D window you may want to invert the pan and tilt to match the direction of the actual light. Here is a picture to help you find the pan and tilt inversion.
Reply
Re: Compu: RGBMix colorwheels disappearing!!
ok i was mixing terms then. I mean on, for example, a generic LED fixture with chan for R, G, and B... one of the buttons compu generates initially is the color pallete where you see all the colors, and can click/drag to get the color you want. I suppose this is the RGB color mixing you speak of. the generated title on the button is "RGBmix" I have experimented with seemingly all combinations of the compression buttons at the top of the page, but I will try some more to see if I can make it...
Reply
Re: Comp U Pro questions
John, Thanks for your help,apparently there are several issues running Compu pro on Vista,Bottom line.........too much "hassle for me" The good news is The re-sale value was great & my Brand new Magic 260 meets my needs & learning curve etc VERY WELL !!! Thanks again GARY
Reply
Re: Audio
hey kkiger. u know i was lookin around for the sound active dmx traits on the manuals to the LED lights and i cannot find em. so i am also not sure about getting the sound functions to work within compuware as i just have the demo right now but i will be getting the actual software sometime this week. we might need to wait for someone ele's help on this one. peace. jingles.
Reply
Re: compu 2006
Hey Guys, last night i had a show and the compu program ran good! It gave me that shutdown message one time the entire night (3hrs) but im stiil having a problem with one fixture (spot).When i click center so that all the lights can face up, that one fixture faces the front (sound guy)I've tried the RPAN and RTILT and it stays the same.Last night i also ran into a prob. with another spot. I was getting a RSER message from it.I wasnt able to use this fixture last night.Another thing towards...
Reply
Re: compu 2006
well u can edit the center button to ur needs. in fact most or all buttons on compuware u an edit to fit ur needs.what u want to do is hit ctrl-alt left click on the center button and a window should come up so u can edit it. now take the one spot that is out of place and put it in place wit hthe rest. should work. what fixture was giving u the RSER message? could be reset error. im not too sure on that so don't quote me. for the lamps u couldn't get them on by hitting the lamp on button? or...
Reply
Re: compu 2006
Thanks jingles.First of all I have 6 Power Spot 250 and 4 Power Wash 250..Is there anyway to edit that one fixture when I'm creating the page for the spots? you know, after it ask me to enter the DMX address and the # of fixtures then it takes me to the next step that asks me if all the fixtures are on and facing up. My concern is, if i edit just the center button once the page is created,the fixture s still gonna be out of sync with the other pre set cycles/scenes. The fixture giving me the...
Reply
Re: compu 2006
is the one power spot in a different position or orientation then he rest that would make the center buton different? like where is it mounted? no if u mess with center it just changed the setting in the center button it shouldn;t effect other buttons unless they ae included in the scene. like i said after you create ur fixture page and thern mess with center just fix the one that you are having problems with. also here is what the manulasays for RSER "RSER This message informs you that one...
Reply
Re: Out of sync Power Spot 250
It really does not make any sense. Have you tried addressing it the same as one of the other Power Spot 250's? This way you know if its the light or the controller?
Reply
Re: Design Spot 250 Color Correction
Hi TW, The Design Spot 250 does not have color correction. The easiest solution would be to have a 32K dichroic filter cut to the size of a Gobo 26.9 x 23mm viewing. Your best bet would be to contact Rosco or Apollo to get the best filter. Best regards,
Reply
Re: Out of sync Power Spot 250
it could be. but lets try it and see if it does anything ok? now maxamize ur 3D viewer and enter construction mode ok? then once u see the tabs. go to ur fixture tab and then open ur power spot folder and turn all the pan/tilt speeds off and see if it does anything ok? here is a pic to help ya out.
Reply
Re: Out of sync Power Spot 250
now im not implying ANYTHING but just as a first thing i would do would be to make sure the all the bases of the lights are facing the same direction(like the led screens facing front and the power cables in the back) i know that has happened to me on tour before and talk about embarrasing. but again im not implying ANYTHING. jthtiger
Reply
Re: Help with buying the best controller
hello, i would apretiate any help from you guys. i have 12 colorsplahjr by chauvet, 8 par cans, and 4 fusion scans. i'm currently tempted to buy the Elation DMX operator Pro, seems it can do all the work, but i'm also looking at a sotware option, easy stand alone by nicolaudie with its cheapest version.... cant really aford any of the other suits. which of those two would you recommend? Thanks, is-REAL
Reply
Re: Help with buying the best controller
I think you hit it on the nail with DMX operator pro. I believe this will easily do what you want. Software is ok also, but the easystand alone will not allow you to run your color mixing LED's and have the par cans stay on at the same time unless you program that into the scene. Easy stand alone will probably be easier to get started on. its pretty simple. Best regards,
Reply
Re: Design Spot 250
hey esteban can you tell me exactly what values channels 11 and 12 are on when u progrma this black out? also about the CMY, on the design spot 575 elation offers CMY mixing. i don't believe they have CMY as a option to be put in on the design spot 250. thanks. jingles.
Reply
Re: Design 36 LED
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply
Re: Design 36 LED
I have the same problems as well with a few Design LED 36s I just ordered. Great lights, but the standalone programs have strobing in them as well as the internal programs via DMX. Also, according to one of the paper manuals I have in front of me right now, there are two DMX modes. The first is 6 channel mode: R, G, B, Programs, Strobe, Dimmer. The second mode is 3 channel mode: R, G, B.
Reply
Re: Design 36 LED
So i guess in the long run i will not find my answer here. How about elation pro you were going to give it a try what did you find?
Reply
Re: Design 36 LED
elatin pro and a bunch of the other people from elation and american dj are now in orlando for this week's LDI. so you may or may not get a response from him sometime this week. also it never hurts to shoot a call to our service department and there is a toll free number. give them a call see if they have a Dled they can use while your talking to them and see if they see the problem too. best regards. jingles.
Reply
Re: Nedd Help with scene transitions Newbie needs help
you could just program a blackout scene in the sequence befroe you want it to be on. just put it on a short hold time or fade time. also im not too sure about the power spots but in some lights there is whats called a "vector mode" which if u have that value selected it will black out when a either pan or tilt motor is moving or even color/gobo wheels moving. it is a cool effect, but again i didn't see it in the values of the power spot 250. peace! welcome to the forums. jingles.
Reply
Re: Need Help Elation DMX Partner & ADJ Delux scan 250
Hi Sparky, This is not possible with the dmx partner. Its the simplest controller made and in order to be able to spot light, you will need to upgrade to an actuall dmx controller. Best regards,
Reply
Re: question about mixed lighting
It sounds like you need the DMX operator Pro. It does exactly that. Or the DMX DUO FX, it does the same thing as the Pro but without faders to dimm the pars.
Reply
Re: question about mixed lighting
We'll now that I think about it, I don't think the DMX Duo will work. its intended for Intelligent lighting on one side, and effects lighting on the FX buttons. This customer has effects lighting, and par cans.. So his best bet would be Dmx operator pro. He can create chases for his effects lights on one half of the board and par can chases on the second half of the board.