Tagged With "Paladin Brick"
Reply
Re: General uplighting for sanctuary - suggestions?
DLED 12 BRICK, right? why am i asking you - you have only seen a handful of the Elation fixtures in person. HAHAHA! Just kidding - i do apprecaite your help bro Rain
Reply
Re: General uplighting for sanctuary - suggestions?
no i know that i was just givin u S**T! LOL yup DLED 12 BRICK. check it.
Reply
Re: Where do I get fixture profiles for Elation DLED TriBrick 36 and Tri64B?
I am going to run the tri brick in 15 channel mode. I am going to use TriPar in 6 channel mode just like my DLED 36's. Yeah, today was supposed to be the day with the new toys...oh well I am plunking away on a Gateway for the time being.
Reply
Re: Design 12 brick profile needed
Hey Amen and welcome to the forums. If you are looking for a Hog 3 profile, it is already in there as LED 12 Brick. For Hog 2, there is no profile. You can set them to 3 channel mode though and just use a Generic CMY Profile instead. Cyan would be red, Magenta would be green, and Yellow would be blue. Hope this helps.
Reply
Re: Newbie question
Sorry for the late response on these question guys, I will try to explain DMX addressing now. The best way to describe DMX addressing is that it is like the postal system. First, you pick the address you want to send the letter to. Then the letter goes to the mail center, where it is sorted for delivery. Next, a mailman takes the letter and delivery's it to the address. The first step in setting up DMX system is you patch your console (Pick the address you want to send commands to). Since...
Topic
Design LED 36 Brick - Master/Slave
I am having issues getting the LED 36 Brick to change to slave, I find slave change to ON but when I hit Enter it does not seems to stick and when I go back its still set to OFF. I have tried this on multiple lights. What am I doing wrong?
Topic
Show Designer 1 Bricked
Hello, This is my first time posting on these forums, so please let me know if there is a better place for me to post about this (I searched and couldn't find any posts about similar issues). I work at a company with several Elation Show Designer 1s. They have been reliable, but we had ordered a new set of them a little while back that seem to have been from a different series of production, despite being the same unit type (Show Designer 1). I say this because our original units had blue...
Topic
Design Brick 70
I've noticed with our Design Brick 70 (both I and II) that in order to get the shutter to open in 8 ch mode I have to roll the attribute up into the strobe section (usually strobe 19-20%) to get it to open. I have just been doing this workaround for about a year, but is there a firmware update that fixes this?
Topic
Firmware fail on Magic 260
To whom it may concern, I had an initial problem where I lost all of the built in fixtures for the Magic 260 and I am in a very big hurry to get the problem resolved. I have the Ulink and the Magic 260 software and I was reading a lot to make sure I was doing everything right. After having spent countless hours trying to load the fixture profiles onto the Magic 260, and receiving nothing more than "Load Error," and other numerous notifications of how the profiles wouldn't load on to the...
Topic Featured
Emulation & Emulation PRO Fixture profiles
Elation Lighting XML fixture library file. This XML contains all of the Elation Lighting products as listed below. This list was last updated Feb 27 2017. If you do not see a fixture you need, please email Support@elationlighting.com and request it. ACL 360i Arena Par Arena Par Zoom Arena Q7 Zoom CMY zoom 575 ColorTone 100 ColorTone 50 Colour 5 Profile Colour Chorus 24 Cuepix Batten Cuepix Blinder WW2 Cuepix Blinder WW4 Cuepix Panel Cuepix Par 300 Cuepix Strip TRI Cuepix Strip WW Cyber Pak...
Topic
Need profile for Design LED 36 Tri-Brick
I'm programming a show tomorrow, and I need to patch in some Design LED 36 Tri-Brick fixtures. I would love to use these on the 6 channel mode, but worse case scenario I can patch them in as a generic RGB fixture and make it work. Where do I go about getting a fixture profile for these fixtures for my Hog 1000??? Thanks for any help!!! -A
Topic
Can not see my Par64 LEDs sequences in the 3D view
Ok. So I am having this problem that I can not see my sequences from my Pars after I have set them up in the 3D view. However I can see the lighting and beam if I am using the options in the page. But once I go to create a new scene I can no longer see my Par64 LEDs in the 3D viewer. My Design Brick 12s, XSPOTs, and DesignSpots show a beam but the Pars do not. Is there some option that I am missing here. Thanks! Matt
Topic
Design LED 36 Tri-Brick
I'm looking at the "Design LED 36 Tri-Brick" and while browsing the manual, I notice a text that mentions alternative lenses. But I can't find any product info on such lenses???? I was kind of set on the Colorblock from AC but yours is better priced and uses the pre-mixed colors while AC's have individual RGB's. But AC has a much more narrow beam that gives me some more "bite" :-)) So, are there other lenses that I can get and swop out the 38 degrees that come as standard?
Topic
Lenses for Design LED 36 Tri-Brick???
Reposting this (was under General but no reply) I'm looking at the "Design LED 36 Tri-Brick" and while browsing the manual, I notice a text that mentions alternative lenses. But I can't find any product info on such lenses???? I was kind of set on the Colorblock from AC but yours is better priced and uses the pre-mixed colors while AC's have individual RGB's. But AC has a much more narrow beam that gives me some more "bite" :-)) So, are there other lenses that I can get and swop out the 38...
Topic
newbie, stagesetter 24, white light
thanks to any who can help -- I'm totally new to DMX. I have a stagesetter 24 and need to program by LED 12 brick to do this: White light. We're using it to eliminate shadows behind speakers and a band at our church. How do I program the stagesetter to tell the brick to make white light? Sorry this is so basic, but I'm stumped.
Topic
need a little help with compu live set up
Hi, I'm new to the forum, and to Elation lighting. I just bought Compu Live software, and some elation Led's, the Opti Tri Par and the Design LED 36 Tri-Brick for theater style lighting. I've had a hard time setting it up. In the "new pages" I can't get them to respond and could use some help for some basic scenes if anyone has any ideas, thanks
Topic
Update Church Lighting
I am working on replacing the lighting in our church. Currently we have three bars of 8 500W par 64 (24 total) that light a platform that is roughly 70 x 30 with the lighting set off the platform by about 20 feet. That gives me a light throw of 30 to 60 feet. I have been recommended the DLED 36 tri-brick (2) to replace the center section with a 36WA to provide center wash. What do you think?
Topic
LED Brick 12 + 60
I was wondering if anyone had the profiles for the Elation LED Brick 12 and 60 and could email it to me. I am using a HOG 500 that makes any difference. hope you can help. thanks.
Topic
Design 12 brick profile needed
I've got a hog 500. Any way to get a profile for these fixtures?
Topic
global buttons
1st question is Have anybody found a way to program the2 global buttons strobe and blinder to control full on of other types of lights. I have plat spot 5R and the design led brick 36 fixtures. 2nd question is can the midicon controller be used for some live hands on situations without having to program the cues and play buttons first. I can foresee some moments where i will need to control some lights quickly and directly. Thanks for any input
Topic
Lighting Demonstrations
Is there anywhere in the Orange County, Los Angeles area that I can see the Event Brick and the Design Spot LED in person? I have searched and cannot find any video and VERY few photos of what they look like and how they perform. Thanks
Topic
Design Brick 70 II
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic
36 TRI BRICK Bad colors
Hey all, I'm new to the forum, so I'm not sure if this is in the right place. I have several 36 Tri Brick lights and I've noticed that two out of the 25 I have, the colors are off and do not match. They're set to the same numbers but don't match up. I was hoping some one would could help me to decide if I need to replace the PCB? Or anything else that would fix this issue? Thanks in advance for any help or suggestions!
Topic
LED Design Brick 70
Is there a profile available for the LED Design Brick 70? Thanks in advance, Bill
Reply
Re: Assassins Photos
Chicago is planned to look a lot like this set, except more open and random. I planning on using quite a few movers and LEDs for that show, most likely DS 575 Washes and Spots for stage washes and spots/break ups, and well as Opti 30 RGBs and DLED 36s for lighting the set, and DLED Brick 36s from top and bottom for cyc wash. It actually works out to be cheaper for both me and the client to rent them DLED 36s then cyc lights to light the cyc. It is great because of the color changes and...
Reply
Re: Help Identifying
Well like i said take a look at the dled 36 Tri brick. http://www.elationlighting.com/ProductDetails.aspx?Item...egory=LED%20Lighting Pretty much the same exact thing just shorter. They are really a nice A$$ fixture! Sincerely,
Reply
Re: Need a ceiling light dimmer, with DMX control option
Yup, I'd say I'd agree. A used basic DMX controller would be way overkill. Perhaps a box with two modes: DMX and manual, like what you said. Slam it all the way down and you're in DMX mode. No signal from DMX? DO NOTHING. Or a button or rocker switch to switch between manual and DMX mode. I agree that choreagraphy with house lights with the lighting director is not always smooth, but it can be if your switch operator isn't flaking out all the time. But, you're dealing with grade schoolers,...
Reply
Re: Update Church Lighting
I think your decision to replace in "stages" is a smart move. One thing I'd warn about is your next set of upgrades. I don't know what your lighting design is so I can't really make recommendations as to which way to go next. I think the idea of replacing one set is smart, in order to raise funds for the next two sets of upgrades. The throw is quite a bit. Are you hitting zones or just doing a general wash in a single static color now? I'm jus not sure if the Brick can throw that far with...
Reply
Re: Update Church Lighting
Take a look at the DLED 36 TRI Brick cut sheet. specifically the photo-metrics section. http://www.elationlighting.com...i-brick-cutsheet.pdf
Reply
Re: Update Church Lighting
I'm no expert, but looking at that photometrics sheet, it doesn't get out as far as 30-60 feet. With my inexperienced photometrics chart familiarity, I'd say offhand that the DLED 36 Tri-Brick isn't goint to cut it for them very well.
Reply
Re: Update Church Lighting
Hmmm... A 500W par 64 at 10 ft is 130fc, the brick at 10 ft is 33fc. Hardly a close comparison. Does anything equal the output of a par can? We cannot afford to invest in something that leaves us darker than we are.
Reply
Re: Update Church Lighting
I took a look at the design brick 70 and it seems to fit. Might be a little pricey for my budget but then again, there is a tremendous amount of light. I am going to take some pictures of the current arrangement. Maybe there are some better ideas out there.
Reply
Re: Update Church Lighting
Take a look at the ELED Strip RGBW. So far I haven't found any LEDs that can compare to a par for white light. I tried a Design LED 60 Strip WA and it wasn't as bright as the RGBW strip when it came to white. I have used the 36 tri-brick with great results, but not from that distance. I have two Strip RGBWs mounted up 28' about 35' from the back of the platform. In a cantata, with a dark stage you are in good shape, but if you light the choir with any white light, the color will get washed out.
Reply
Re: Update Church Lighting
The brick 70 and 50 are nice units! Not sure if we are still making the 50 though, haven't seen it on the site but i have used them. Also so is the RGBW strip. you have a lot of very nice choices. I agree with chris some pics will definitely help us all get a better sense on what you have. Sincerely,
Reply
Re: Update Church Lighting
It's too bad a lot of local resellers don't stock Elation products(even my local resellers don't carry them in inventory, it's all drop shipped). This way, with stock on hand for demonstration purposes, stuff could quickly be swapped in and out and tested. Oh well. It's not really a unique Elation thing, lots of places are that way about a good many brands. I know from my preferred dealer, due to distance, such options are impossible. Since this stuff tends to be expensive, it's too costly...
Reply
Re: Spare dongle / mortality worries
Just adding a bit more, since Support brought up issues in regards to hacking and piracy, and Tom682 brought up iLok into the equation: Software piracy costs the software industry billions per year. File sharing is KILLING royalties for musicians, artists and bands(and don't get me starting on the crap-tastic MP3 suck format), equating to further BILLIONS in losses. How do I do my part? First, NO MP3's!!! Unless I make them(I won't), MP3's don't exist in my network and infrastructure. If I...
Reply
Re: MAGIC 260 PROFILES
at the risk of sounding needy can I also have a "Elation Design LED 36 Tri Brick". Thanks!
Reply
Re: Downloading/Saving Fixtures Magic 260
I too have been bashing my head against a brick wall trying to get my PC to load the profiles I have made for the 260 controller.. One for a Prolight LED light bar, and one for a Martin SCX700. I was getting a "Format Error" when I tried to send the SCX700 over to the main screen, but I've overcome that. I can save the .wcn file, just don't seem to be able to send it to the controller, either with the USB lead, or the USB memory stick. The original fixtures have saved to the USB memory...
Topic
Brick70 vs Brick70 II
Are the Brick 70 and Brick70 II compatible with each other? Can I use both in the same DMX chain, controlled by the SmartFadeML?
Topic
Paladin Firmware
Upload tool: CUE Software Uploader Paladin V1.20 What's New: -Set C-Loader to SLOW!- Firmware version: V1.20 Firmware date: 31-01-2022 For Serial numbers: All Units NEW: - Messy display code bug solved - RDM addressing issue solved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...
Topic
Paladin Brick/Paladin Brick WMG Firmware
Uses C-Loader uploader tool. Paladin Brick/ Brick WMG Firmware V1.07 What's New: -Set C-loader to SLOW!- Firmware version: V1.0.7 Firmware date: 22-08-2022 For Serial numbers: All units NEW: Optimized RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick...
Topic
Paladin Panel Fixture Firmware
Uses C-Loader uploader tool. Paladin Panel Firmware V1.0.7 What's new: Fixed display code bug and resolved a RDM addressing issue. Power output optimized. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic
Paladin Cube Fixture Firmware
Uses C-Loader uploader tool. Paladin Cube Firmware V1.0.9 What's New: RDM optimized/solved bug that caused a locked unit when RDM was used. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...