Skip to main content

Tagged With "V1.07"

Everything
Reply

Re: Design 36 LED

serraava ·
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply

Re: EasyShow

nickcarbone ·
IBM Thinkpad 2.4Ghz CPU 1GB Ram 40gb HD barely used Video Card is onboard and probably crappy Windows XP 2005-ish 12-21-07 CompuLive The show ran great yesterday as well, playing through 3 different shows changing tracks no problem with no glitch or skip... just that one time it happened worries me.
Reply

Re: Compu Live Question

ebaclights ·
Ok, I found what I believe John is talking about. http://www.nicolaudie.com/main.php?id_page=28 It is the same list price that he stated. It does look nice but its still overkill from what I am talking about. It is a self contained wall mount DMX controller much like the AR-32. It can be programmed with the Easy Stand Alone software, and act as a dmx usb dongle for Sunlite/Compu. So basically it is like an Easy Stand Alone box in a fancy touch panel for the wall. I dont think you guys...
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Intermittent error 05, 06 & 07 DS 250

atlantadj ·
I keep getting intermittent error. When I brings the lights home, I get no error but at the show the fixture gives me 05, 06 & 07 error, I transport in the elation ATA dual case. I don't want to ship it n, because that alone is $100 round trip from Georgia, Also I have owner 6 of these fixture and error 5, 6 & 7 are the only errors I get ever get.
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Design 36 LED - Initializing Problems

matchless1 ·
I have 4 Design 36 LED's. 3 are new (bought w/in the last month) and 1 was purchased in July of 07. The 3 new ones work fine. The older one behaves a little strange. First let me state that the following behavior happens when all 4 LED's are linked together and all set to the same DMX channel via the dip switches. I power-on all 4 lights and the controller (DMX Operator 192). The 3 good lights blink quickly (so I know they have power) and are quiet (no audible fan running). The bad light...
Topic

Design Spot 575E Flickering

brianworster ·
A church that I do some freelance lighting for has 10 Design Spot 575E's. Several of the bulbs are flickering quite noticeably. Lights were installed in December of '07. Any ideas what might be the cause? Thanks. Brian Worster Legacy Sound Productions
Topic

To all those who missed LDI 07'

Jingles8302 ·
hey guys we now have a video up on the site of a recap of LDI check it out here. LDI 2007
Topic

Design Spot 250WH

danielmty ·
Hello there, I purchased 4 white design spot 250w... 2 work fine the other 2, I've had problems since day 1... The problem is that whenever I plug the fixture in to the power outlet, it starts to crack... I know that whenever you plug a fixture in it runs sort of a reset program that is built in... but this one makes a cracking sound while doing that... it does give me 07-Er... I've taken it back to where I purchased them and they said that it has something to do with the main board (which...
Topic

Three errors on a design spot 250

atlantadj ·
I had my wife buy this unit down in Florida and it had three error messages: 05, 06 & 07. Each error could have multiple causes. EG, error coder 05 "This message will appear after a fixture reset if the color wheel’s magneticindexing circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure (defective motor or a defective motor IC drive on the main PCB)." How do I isolate what the cause is for each? Thanks for your help.
Topic

AlsoSuite2-BC interface not recognized

ddorling ·
My interface isn't recognized any more. USB Suite2-BC I was running Compu Show, the June 7 release, and everything was working fine. I had an issue with the behavior of the size control for the Page Buttons and thought I'd try the latest beta Nov 29. The interface wasn't recognized and so I uploaded the firmware included in the beta version through the TOOLS program as suggested by the message. The interface was recognized by the TOOLS program and I hit the Load FIRMWARE as it did and...
Topic

Design Spot 250 multiple errors

coontasch ·
One of my original design spot 250's will run fine for a few minutes then starts having issues. It appears that the first thing to crap out is the shutter then everything but the pan and tilt. I can reset the fixture and everything will function again but only for a few minutes before the same errors occur. Eventually resetting the fixture does nothing and i get the following errors: 05, 06, 07, 08, 09, 10, 13. Any suggestions?
Topic

My Compu Live 1024 EC and Win 7

thex-man ·
S- I am new here, if you didn't realize, as well as to DMX. Got Compulive, today and had problems with drivers. Have a desktop that seems to have jumped in there and recognized the toggle box. Needless to say it did not with my Laptop that has Win 7. What do I do? Can't seem to find answers, although on one post I saw from last year you seemed to get that guys going. Pertinent Info? Bought from GA Guitar Center just today, 1) CD dated 4/16/07 Copyright, 2) Toggle Model-Compu 1024EC and of...
Topic

Design Spot 250 error

atlantadj ·
Hi, I am getting error 05, 06 & 07. Also during the channel test, nothing happens for channels 7 (gobo retation), channel 15 (scan speed) and channel 16 (Auto Program). For Channel 2 (pan high resolution) it only moves about 2 degrees and then resets and repeats. Same with Channel 4 (Tilt high resolution). What could be causing these error? IS it something I can fix myself? I have two other units I could borrow parts from to try and fix. Thanks for your help!
Reply

Re: help!! easyshow/laptop crash

nickcarbone ·
:-/ i gotta check my version now, i don't remember if i updated or not. if i'm using 12-07 software i'll make sure i update right away, but either way i'd like to see what the developers have to say. thanks!
Reply

Re: Compu Live Keeps Crashing

matchless1 ·
Thanks Jingles. Will do. I was using the April 07 update last.
Reply

Re: compuware 2048fc

Jingles8302 ·
i didnt work for you guys in sept of 07. Started dec 07' haha
Reply

Re: How does everyone organize their scenes/switches/etc

davidpatton ·
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply

Re: Problems with compu 2006 with 1024EC

verchern ·
Yes. If I am using the USB box with programmed scenes, it works fine. If I am using the easy stand alone program on the PC, I have issues. The LEDs are NOT plugged into the dimmer. The dimmer runs all of the house incandescent lights only. The LEDs are powered from straight 120v circuits (no dimmers) with DMX control. According to Tech support, the new software dated 12-21-07 on your web site should fix this issue. I downloaded it today and will let you know.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Reply

Re: Problem with eNode 8 Pro / sACN and ETC Gio Lighting Desk

Jingles8302 ·
Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.
Reply

Re: SixBar 500 Firmware

elationservice ·
UPDATED LINK TO NEWEST FIRMWARE.
Reply

Re: SixBar 500 Firmware

Youri Gidding ·
any release notes or list of changes available?
Topic

SixBar 500 Firmware

elationservice ·
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL Bar 360 Fixture Firmware

elationservice ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DTW Bar 1000 Fixture Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60IP Firmware V1.07

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ZCL Bar Z 300IP Firmware

elationservice ·
Upload tool: C-Loader ZCL Bar Z 300IP Firmware V1.03 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

DW Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

CUEPIX Panel Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader CUEPIX Panel Firmware V1.20 What's new: Changed the term Master/Slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

ACL Par 200 & 200IP Firmware

elationservice ·
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic

Protron Eclypse Firmware

elationservice ·
Firmware Tool Required: A-Loader (SNI211) Protron Eclypse Firmware V1.5 What's new: The flickering image on 16bit master channel Using duration and rate set at 255 in manual mode to get a steady output Use only 75% of max output power in manual mode. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software...
Topic

Protron 3K Color Firmware

elationservice ·
Uploader Tool Required: SNI Uploader Protron 3K Color Strobe Firmware V1.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply

Re: DTW Blinder 700IP Firmware

juan ·
Buenos días, mi pregunta, yo tengo los dtw 700ip y estan en la versión 1.0.5 por solo hay en la paguina la versión 1.0.4
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
Firmware V1.06 is available for download. V1.06 esta disponible
Reply

Re: DTW Blinder 700IP Firmware

juan ·
muchas gracias
Reply

Re: DTW Blinder 700IP Firmware

juan ·
buenas tardes me paso algo muy raro estoy actualizando los dtw 700 solo me estan prendiendo un solo lente sera q me puedes colaborar con este problema
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
¿Ocurrió el problema con todas tus luces, o solo unas pocas? ¿Estaba el problema presente antes de la actualización?
Reply

Re: DTW Blinder 700IP Firmware

juan ·
me pueden regalar la version 1.0.4 aver si puedo recuperar las targetas q no me estan funcionando
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
Por favor envieme un correo electronico a ricardo.campos@elationlighting.com
Reply

Re: DTW Blinder 700IP Firmware

juan ·
Mi correo es tobondavid@hotmail.com
Reply

Re: DTW Blinder 700IP Firmware

elationservice ·
UPDATED to V2.0.0 Firmware in Original post.
Topic

Platinum Seven Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Platinum Seven Firmware V1.2.1 What's New: -Master/Slave text changed to Primary/Secondary You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
 
Post
×
×
×
×