Skip to main content

Tagged With "V1.09"

Everything
Reply

Re: Crashing...Crashing...Crashing

washingtonlighting ·
Ok So I used my Mac setup over the weekend, and it was horrible, Elation would be up 5 minutes, and crash, or the green light would go out on dongle, and would need complete reset. I ended up just using the backup Magic 260 I had with me. Problem was it did not have enough channels for all the lights, so I could not change color of all LED cans, some were stuck on color when Cumpu Live quit. Today I tried the setup on a normal Windows Laptop. 1.46ghz 512ram. It isn't the fastest, but it is...
Reply

Re: Want to be notified of new compu software and interfaces??

mu0p ·
??? I thought it was at the end of Jan/Early Feb edit Also I have an email stating the update was supposed to come out of Jan 09! Said the update was going to fix the LED issue in the 3d software... Misbeam's angered post is starting to come to life
Reply

Re: CueCable drivers for Vista and Windows 7

loop ·
Hi James, Read through this. This is what is coming up in my C: Promt Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>cd \Program Files (x86)\Elation\Emulation1028\drivers\win64 C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>install.bat C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>wdreg -inf windrvr6.i nf install WDREG utility v10.10. Build Sep 2 2009 09:43:37 Processing HWID *WINDRVR6...
Reply

Re: Robe Dominator 1200 XT

bulletprooflightandsound ·
I guess I thought I knew a lot about this software. So to get this right. You're saying the most recent profile 4/09 for the Robe Dominator 1200 will work on all mirrors but I need to program the fixture in the master page instead of in page mode? If so. I don't know how to program it in the master page. Is that in the manual or can you post the method to do that on YouTube?
Reply

Re: SD3 - External Software?

jlivings ·
Posted 02 March 2011 09:59 AM Hide Post Sorry, I was asking about The Virtual Compu Live Software. I have a SD-2 and a laptop with windows 7 only. Regards, John
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: Profile for X-Laser

tag ·
That would help her it is http://x-laser.com/manuals/XSeriesManual07-09.pdf
Reply

Re: Profile Needed - Elation ELED DW PAR56

church-technologies ·
Hey Jim, Here is the profile we created to solve this problem. Copy your Elation.xml file to your user folder under Common/Personalities/User Open the file and add the following to the bottom of the file before the following text: </manufacturer> </personalities> <model label="DW" class="Led" alias="ELEDPAR56 DW"> <changelogs> <change username="Church-Technologies" notes="Changed color names for ELEDPAR56DW" date="2012-04-04" time="08-09-10-37" />...
Reply

Re: Setting dip switches

elationred ·
@billyboy, let me jump in. The DP-415 has dip switches based on the binary code standard. This means that each dip switch is double the value of the one before it. If you look at the image attached (DP-415 Dip Switch. will see the 10 dip switches and above it the values that each creates. Switches 1-9 can be combined in any configuration to create a number from 1-512. This will represent the starting slot (sometimes called an address) of the DMX signal that the pack will respond to. Because...
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Paladin Panel Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Panel Firmware V1.02 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Artiste Picasso Fixture Firmware

elationservice ·
Upload tool: None, fixture has a USB service port. Artiste Picasso Firmware V1.1.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Smarty Max Fixture Firmware

Jingles8302 ·
Upload tool: E-loader or fixture has a USB service port. Smarty Max Firmware V1.3.4 What's new: See release notes included in download. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Magic 260 and MIDI

j4f-band ·
Hi Friends, on August 17 2008 User "Davey Boy" wrote: Now I have the same problem. Why is there no response on how to control the Magic 260 with MIDI? And I have a second question. Which function has the led over the Delete-Button. I've never seen this led has shone, wether I pressed the Delete-Button or not. Thanks in advance!
Topic

Design Spot 250- 2 fixtures with individual problem

3dsounds ·
I searched through the forums and did not see a similar post so hope this is not a repeat. I have 2 DS250's which I bought about 2 years ago. I have only used them about 20 times, at about 4-5 hours each time so they have very little run time, yet they both have a separate issue. Fixture 1- The fixture was last used on 5/9/09 (yesterday) with no problems. On 5/10/09 (today) I turned onto check which of the 2 fixtures had a custom gobo, and during the initial setup when it was first plugged...
Topic

Magic 260 and MIDI

daveyboy ·
Hi. I am trying to figure out how to control the Magic 260 controller via MIDI. I searched the manual and on page 11 it says that "When connected to a MIDI sequencer, keyboard, or any other type of midi signal generating device, scenes, shows and the blackout function can b accessed remotely" However, the only other documentation is a chart on the the last page, page 34. It gives values, which I assume are MIDI program change messages, that supposedly call up scenes and shows if sent on the...
Topic

3D issues with sept 09 update

boostedmopars ·
Im having a file size issue with the 3D viewer. For some reason all my 3D files sizes have increased in size and now it takes forever to load them?? Iv never had this problem before. Iv reloaded the soft wear and even gone back to that nov 08 version. Kris Burl
Topic

all lights on one page

sonicdj01 ·
i have 2 dp 415s dimmer / relay packs with 4 par 38 cans on each one 4 roboscans 812 and 2 adj mega pixel leds is there away to put all these lights one 1 page ? im using the compu live sept 09 update if so how please ?
Topic

icon question

sonicdj01 ·
I'm using the compu 1024 ec sept,09 . I'm trying to make my own icons for my switches. What size do they need to be in pixels and what fotmat do they need ti be in
Topic

Error's on SD3

audiopip ·
Hi @ all... May be some of you can help me, by starting the SD3 today was a mad configuration of bright LEDs to see and on display wars written something like: "Copyright error ..." I had no change to start the Desk normal. OK I have removed the battery an waited awhile after that time the SD3 starts normal but now I have a lot of "Memory error 01 -09" each typ... Is there a chance of a "master reset" to have a clean new memory? May be by a key combination? On SD3 is the software 1.15...
Topic

Design Spot 250 multiple errors

coontasch ·
One of my original design spot 250's will run fine for a few minutes then starts having issues. It appears that the first thing to crap out is the shutter then everything but the pan and tilt. I can reset the fixture and everything will function again but only for a few minutes before the same errors occur. Eventually resetting the fixture does nothing and i get the following errors: 05, 06, 07, 08, 09, 10, 13. Any suggestions?
Reply

Re: Silent moving heads?

elationpro ·
Hi guys, nothing in the works at the moment. But maybe in 09'. I've looked alot into this technology, and I like it. Especially since we are working on moving into the church lighting installs, this issue has come up alot. So I won't rule it out. Thanks EBAC for your insight! Best regards,
Reply

Re: How does everyone organize their scenes/switches/etc

davidpatton ·
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply

Re: Trouble with Compulive

sasquatchproductions ·
Actually its a 64. Can you tell me what the difference is and why there is one? We thought 64 would be better, but now im not so sure... Also, im confused by the dates and how the Sept 09 edition is more recent than the Dec 09 version, but since im using 64 bit, will I even have access? Thanks again for all you help James, Ive got a show this weekend that Im hoping to be up and running for and a BIG show June 12th that I have really got to get moving on so the sooner I can figure this out...
Reply

Re: Upgrading

Jingles8302 ·
ya sept 29 2009. Save your work files and any custom profiles you may have made or received. save them to a thumbdrive or even your desktop. I recommend uninstalling and deleting the SL2006 folder then install the sept 29 09 version. Sincerely,
Reply

Re: Major Problems

washingtonlighting ·
Tried something else... I will work on backing up files so I can fully remove and re install program. I hooked midicon up to another laptop, my mac with windows in parallels. Normally I run with this but it has been know to be unstable but figured worth a try. I am running Sep 09 Compu06 Software on that one as it is nice and stable. I tried the shift right click in this and window would come up. I would hit button on midicon, and would get error "midi command is not assigned in the...
Reply

Re: firmware update

vooxman ·
What reason could there still have the controller does not take over the fixtures. The controller loads the. Wcn file correctly but does not show the new fixtures. On the controller are not the 4,6,8,16, Channel original fixtures available. Could it be the USB driver or the programmupdaters Ver. 1:09 be? Can I do a reset on the Magic 260? Thanks for the help greetings from Germany / Bavaria Rudi
Reply

Re: firmware update

vooxman ·
What reason could there still have the controller does not take over the fixtures. The controller loads the. Wcn file correctly but does not show the new fixtures. On the controller are not the 4,6,8,16, Channel original fixtures available. Could it be the USB driver or the programmupdaters Ver. 1:09 be? Can I do a reset on the Magic 260? Thanks for the help greetings from Germany / Bavaria Rudi
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Topic

Rayzor 760 Firmware Updates

elationservice ·
Uploader Tool Required: E-Loader Rayzor 760 Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply

Re: SixBar 500 Firmware

elationservice ·
UPDATED LINK TO NEWEST FIRMWARE.
Reply

Re: SixBar 500 Firmware

Youri Gidding ·
any release notes or list of changes available?
Topic

SixBar 500 Firmware

elationservice ·
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL Bar 360 Fixture Firmware

elationservice ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DTW Bar 1000 Fixture Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60IP Firmware V1.07

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ZCL Bar Z 300IP Firmware

elationservice ·
Upload tool: C-Loader ZCL Bar Z 300IP Firmware V1.03 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

DW Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

CUEPIX Panel Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader CUEPIX Panel Firmware V1.20 What's new: Changed the term Master/Slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Paladin Cube Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Cube Firmware V1.04 What's New: changed menu wording from Master/Slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ACL Par 200 & 200IP Firmware

elationservice ·
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic

Fuze Par Z120IP Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z120IP Firmware V1.15 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

CUEPIX 16IP Firmware V1.06

elationservice ·
Upload tool: C-Loader or USB Stick CUEPIX 16IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Artiste Van Gogh Fixture Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Artiste Van Gogh V1.3.3 What's New: -Master/Slave text changed to Primary/Secondary -Fan behavior optimized in "mute" mode to avoid led shut down. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct...
 
Post
×
×
×
×