Tagged With "Firmware V1.14"
Reply
Re: Stupid Question but help
hey del. dude i am exactly like you I'm 14 years old and LOVE lighting. no rig yet but i have the software and love it(im farily good at it to if i say so myself). I'm going to try to make a vid sometime and post it here. see ya jthtiger
Reply
Re: Design 36 LED
oh ya i wanted to go but couldn't. ya have your guy ask for mikey g or jon lopez, they are both cool dudes and should help you out. also have ur guy take pics! supposed to be a BIG elation booth. tons of lights. at least 14 impression leds alone!! peace! jingles.
Reply
Re: Compu Live Question
July 14, 2008 Help! I am sending this to 3 or 4 people I hope can help. I have installed a lighting system utilizing the following components: 1. – Acclaim s-fade6 at the entrance door 2. – Elation Compu -1024c 3. – an A-B switch 4. – Elation RMD620 Arc dimmer for house lights 5. – 6 Elation Pro Bar 4 – for an assortment of pars and ellipsoidals. 6. – 3 Elation RGB LED at various points in the path - They are addressed as 101, 108, 115 Problem: When the x-fade is operational it controls more...
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: How to program the ADJ Mega Pixel on Magic 260
you know if you want the most control try a 14 channel mode or something towards the larger numbers but not more than 16. also look Here For a DMX 101 Guide Sincerely,
Reply
Re: DP-DMX20L dimmer ... is it 20A or 15A max?
That annoying right angle plug thing. I have chopped off and replugged/bent straight more of those things then I care to count. The only real reason why it is there is because people try and do stuff cheap aka use 14/3 and 16/3 instead of 12/3.
Reply
Re: Looking for Par64 Replacements, sort of
Well, the Opti RGB would probably be closer to a 300w Par 56 lamp. As for beam sizes of Par 64 lamps, they are roughly as follows: VN: 12 Degree N: 14 Degree M: 24 Degree W: 50 Degree Keep in mind they are rough numbers. Also remember that Medium and Wide lenses spread in an oval, not a circle. Here is a Cheat Chart for Par 64s. Granted, it is for 1000w, but the dimensions are the same for a 500w lamp.
Reply
Re: PRO BAR 4 Help
Well, with a situation like yours where you are doing repairs anyways, I think the best way is how you originally approached this: ordering te correct part so you can install it. Really, if you're doing repairs anyways, you know what you're doing. I'd say contact Elation support via email or make a well timed phone call to Elation to speak to someone in support and order the correct part. They'd probably ship it in a day or two and you should get it within 10-14 days. I'm just basing this...
Reply
Re: Buggy MAC version
Well thats is obviously another BUG !!! The link in the 'Options' window reports 'New new version available' and the auto check function must not be working. Sorry to be a bit pernickety but at over £300 for a cable and a software download I did at least expect the software to be reasonably well settled and tested. I have even offered to beta test the Mac version, been using Macs since 1984 and I can break anything. Then all you have to do is speed up the turnaround on posting updates. Will...
Reply
Re: Buggy MAC version
OK, ten seconds of testing reveals (as I stated two weeks ago above) when you start program, FOG-STROBE-BLINDER buttons are latched ON. This was in C***** Build.13 as well and reported to them. still not fixed in Build.14 Will look at more after I put little one to bed.
Reply
Re: Buggy MAC version
Select any fixture and click 'copy' and it crashes. Nice if you hit that by accident at a concert with 6,000 people watching a live band as we will have this Saturday. Very expensive for the pleasure of being a tester. PS - Your link says Build.14 and the program says b.12 in 'About' box it says; 1.02.12 (1.02.9) I think this is build.12 not 14
Reply
Re: Need profile: Chauvet Q-SPOT 260 LED
Forgot to tell you that I need it on Advanced Mode (14 channels).. thanks again!!
Reply
Re: Buggy MAC version
It is updated now, still shows B.14 when I think it is only b.13 Auto update still does not work. Strobe etc. do not latch now but still crashes. Really not too impressed....
Reply
Re: Need profile: Chauvet Q-SPOT 260 LED
hello james. can you send this fixture profile to me as well? i just have 4 qspot 260led. also for advanced mode (14 channels) thks.
Reply
Re: DMX Operator 192 - software
OK I have downloaded the software although I haven't yet hooked up my Operator 192. I am just trying it in demo mode. The light pars that I have are new, they are by Microh, you can't even see them on the website, although there is a similar system that is exactly like mine except different pars. I have checked the online manual for the system that they have online and it is exactly the same and works the same way. The system is the LED Quadpar. It consists of 4 pars on a single tree. The...
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: Intimidator™ Scan LED and SD3 not working
I forgot to mention we have 4 elation design spots 250. They work perfect. So the board is working. Why they used 4 design spots and 14 chauvet leds is very odd, I would of got 4 more design spots which are brighter. lol So its most likely the dip switch 10 not being on.
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: fixture profiles request
Ok sorry for the delay. Here is the GLP xml: http://db.tt/medTeYN The model you will want to use is the impression RGB 10 or 14 channel mode. showtec xml: http://db.tt/FLqn3VK The model your looking for is the LED Par 64 Short 18X3W I'll try to get the midi con dimensions tonight. Just got to bust out my tape measure. Sincerely,
Reply
Re: A Little Help with Fixture Program
Jaime, my apologies about the delay in response. Yes I remember seeing this fixture before. It is quite weird. I had to modify a profile for another customer who has the same ones. He said he had to block the fixtures as a 14 channel fixture. Very strange. would you like some online screen sharing training on Tuesday or Wednesday of next week? I'd be more than happy to give you a tutorial or just help you sort out this profile. Let me know. Again sorry for the long gap in response. Sincerely,
Reply
Re: Profile needed for American DJ Vizi LED Spot
Ken, I downloaded the profile and took a look at it in the fixture editor and noticed the profile and the channel listing in the manual don't match up. They differ as follows... Chan. Vizi Spot Manual - Profile (from elation website) 1 Pan Movement 8bit - Pan Movement 8bit 2 Pan Movement Fine - Pan Movement Fine 3 Tilt Movement 8bit - Tilt Movement 8bit 4 Tilt Movement Fine - Tilt Movement Fine 5 Color Wheel - Color Wheel 6 Gobos - Gobos 7 Gobos Idx/Rot - Gobos Idx/Rot 8 Rot Prsm/Gobo Macro...
Reply
Re: Profile needed for American DJ Vizi LED Spot
The manual you have linked to at the top of this thread is for a 12 channel light that matches the profile. You must be looking at a differet light that is 14 channel.
Reply
Re: Profile needed for American DJ Vizi LED Spot
Oops, sorry, I found the URL but didn't check to see if it matched up with my light. Here is the correct manual with 14 channel option. ADJ Vizi Spot LED Pro
Reply
Re: Why can't I get the profiles from the web library
Thanks a lot! So far it looks like everything I need. The 14 channel minspot (13 and 6 were easy to come by), scorpion storm rg, and others all seem to be there. I will check out the compu show later I do t have my lap top on me. I would really like to use it I hope I can get it to work. I did load it on my home pc also to make sure it wasn't a problem with the laptop but it does the same thing. Anyway, thanks again for your help, it is very appreciated!
Reply
Re: Profile needed for American DJ Vizi LED Spot
hi,I am looking for a 14 channel profile for an ADJ Vizi LED Spot for a compu live 2006
Reply
Re: Magic 260 Controller Failure
We have turned it off and that nothing for us. The display comes up normal but I can not go in and add fixtures or select scenes. When I go into the menu to select fixtures, I can get all the way to where you select the fixture with Wheel #2, but the wheel does not respond. Also, we knew something was wrong when used the main fader and nothing responded. I could tell the board was trying to communicate to the lights because when I shut the board off the digital display on the lights would...
Reply
Re: DMX Partner
Thanks for you assistance. I purchased a DMX Operator to take care of my needs. I have read through the user manuel, and have two questions: 1. Can sound mode (Audio Bank)be activated before I set up any scenes? If not, what is the quickest way to use the DMX Operator for a show with the fixtures I have (please see initial thread) 2. Is is better to set each fixture on its own scene, then develop chase patterns, or is it better to set them up in banks and then develop chase patterns bank by...
Reply
Re: Need Profile Please
14 channel: https://www.dropbox.com/s/n2te...LED%20350%2014ch.ssl 8 channel: https://www.dropbox.com/s/ldoj...0LED%20350%208ch.ssl Sincerely,
Reply
Re: Profile needed
Truwrshp, Your profile request has been submitted. I noticed that there is a 14 channel mode and a 16 channel mode each requiring it's own profile. Which one are you running it in? That way we can work on that profile first. Also where can I email it to once it's created? Rafael
Reply
Re: Profile needed
Is this what you need ? Or you need the manual? How can I send you the manual ? It can also be used in 24 channels too. 1-Pan 2-Tilt 3-Speed 4-Lamp on at 130.139 5-Colors 6-Nothing 7-Gobos 8-Rotacion Color wheel 9-Rotation Gobo Wheel. Fine set up 10-Prism 11-Rotacion Prism . Fine set up 12-Frost 65.255 Cierra el open gobo 13-Zoom 14-Focus 15-Strobe 16-Dimmer.
Topic
New profile for SD3
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic
Blizzard HOTBOX exa Profiles
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic
Can Someone make these fixture profiles for the elation magic 260?
v par pack 7 channel ultra bar 6 7 channel venue thintri 38 8 channel mini wash moving head 14 channel Thank you
Topic
Spot Briteq BT-Theatre 60FC Black LED theaterspot
Spot Briteq BT-Theatre 60FC Black LED theaterspot I have got an demo. The spot Briteq BT-Theatre 60FC Black LED theaterspot is very good. We want to buy 10 of them but without fixture we can’t use them with Emulation. Can you do the job? If we have the fixture, how can we update Emulation with teh fixture, Best regards, Deschamps Koen.
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
eNode 4 pre-sales support questions
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Needing two profiles to add to Emulation software.
Needing profiles built for Chauvet Intimidator Spot 110 10 w and Blizzard Lighting Lazer Blade G. I have attached the manuals with the information. Any help would be greatly appriciated!
Topic
event bar
i have 4 EVENT BAR. the controlled with ELATION COMPU 2006 in 14-channel mode, the only universe that I have, I'm taking 400 channels with different lights. By using the EVENT BARS, 5 seconds after making the first move are full reset and then work in normal condition, but to make another move, strobe, black out or go home, go back and do the full reset ... ... and try to put in all 3 modes of channels and continue with the problem, anyone can help me with this?
Topic
Profiles needed
Hi there, I Just purchased the SD 2 and can't wait to get started! I've been looking through the forum and see that most of the profiles I need are already built , I just can't seem to find the links to them. I have PDF manuals available for the fixtures if they're needed. Here's a list of the profiles I need: Eliminator Electro 192 :7 ch DMX Chauvet LED Splash 200B :6 ch DMX Chauvet PAR 64 :7 ch DMX Chauvet Colorrail :7 ch DMX Chauvet 6spot : 8 ch DMX American DJ Vizi spot :14 ch DMX...
Topic
Need profile please!!!
I just ordered some new lights but can't find a profile that works. Any help would be AMAZING!!!!! Info below 36X5W 180W LED MOVING HEAD WASH LIGHT Channel Function 1 Pan 2 Tilt 3 Pan/Tilt speed 4 Dimmer 5 Red 6 Green 7 Blue 8 White 9 Strobe 10 Color Change 11 Mixed Color 12 Auto Mixed Color 13 Pan Fine 14 Tilt Fine 15 Reset Thanks so much!!!!!!!
Topic
Manual sync song with cues
Well, I've found a way to match up a light show with the bohemian rhapsody. There are 14 layered cues. I edited the cuelist and in chase mode you can delay each cue till a custom time. The first cue is at HALT. The next shift in the song is 14 seconds into the song. (Is this the real life....) so cue2 is delay 14 seconds then begins. voila! So basically I mapped out how many seconds into the song eac cue is and delayed it till that point. I am playing the Mp3 from another machine and I just...
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
TV Lighting
Which Elation fixtures are the best for lighting an area 20 feet wide, 6 foot deep and the the fixtures would be about 14 feet away. This is for TV so flicker free and low noise are important and it will primarily be white light but could be 3200 or 56oo degree Thank you