Tagged With "Firmware V1.26"
Reply
Re: Octopod 80 Elation Policy be warned
January 2007 was the complete lightning installed in Dania Beach where my restaurant brandnew was becoming ready. The choice of the system was basically done by the professionals as the installer Sound & Lightning Ft. Lauderdale and his order to elation company. I only have had a fix amount for every thing which was paid after finishing the job. Couple of months later some of the lamps got discolered and I complaint. I was asured that they will be switching the plates and so were 6 of...
Reply
Re: design 108
Thanks for the pics! Does the Design 36 have the plastic diffusion plate in it? Also, I compared a 575W S4 to a design 36 and the S4 is brighter on some colors (yellows, oranges, whites, etc...) but the DLED 36 makes a much more "dense" red, green, blue, pink, and teal. So I thought maybe getting the 3W DLED 108IP might be a better deal (wider beam and a bit brighter) compared to a DLED 26 without diffusion. However, after doing a show this weekend I have noticed that the musicians perceive...
Reply
Re: design 108
Depends on what they are fighting against. When I used them for a back wash on the set for Assassins, they were fine. In dark bars, they are also fine when using other LEDs, 250w movers, 500w\600w pars and/or S4 Pars lamped 575w or Opti Pars lamped 575w. Generally, all these things are back, side, and/or ground effects and the DLED36s light the stage just fine from the front. When pitting them against S4 lekos from anything more then 20-25', forget it. No lenses mean you can't get the beams...
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Can You Guess??
Close. i am now 26. iguana do you have an elation polo? Have i sent you one before? email me your response at james k AT elation Lighting DOT COM Sincerely,
Reply
Re: triger troubles
Depending on how the software is written, the caps lock key can be partially ignored, which sounds like the case here. Or maybe you didn't program anything in CAPS. in which case, the software shouldn't show caps. What the poster is now talking about is multi-key triggers. So, he would hit the letter "c", followed by the definer: say, "1". SHIFT doesn't count(well, almost never.) I had a security package where part of my password involved me hitting and releasing. It was a very strange but...
Reply
Re: AR-32C USB Driver for 64 Bit Vista
It's ours. http://www.elationlighting.com...nued&txtSearch=AR-32 Phil we will have someone help you out tomorrow (2/26) OK? Also if you just can't wait, Don't be a stranger give us a call. one of our support staff will be glad to assist you. Welcome to the forums. Sincerely,
Reply
Re: Changing gobos on E-Spot
In reviewing several of the posts I have made, I realized that words at the end of lines of text seem to have been "disapeared." I use both a 26 and a 37 inch monitor, and from time to time it appears that Microsoft has "shaved the content" when the posts are translated to a normal sized screen. I apologize if there has been a misunderstanding, but the fact remains that, while I love the E-Spot fixtures, I need information not only about how to change gobos, but, down the line we will need...
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: Emulation For The Beginner
That's weird. I'll definitely check this out and report to our developer. Thanks. You using 1.03 build 26 correct? On a Mac? Sincerely,
Reply
Re: Fixture request
We should have build 26 up on our website. Should fix that issue too. Sincerely,
Reply
Re: Fixture request
Good try but no luck. Now running Version 1.03 BUILD 26 For Mac OS. Replaced instrument with the new {USER} CHAUVET file & it crashes once I hit the OK key.
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: OHM RGB controller
all the midi map is doing is linking the buttons from the OHM RGB to the software. as far as the colors of the console that is something you need to find out through the manufacturer of that console. emulation will not pick what color it wants the controller buttons to change to. that might be a preset on the console itself.all the midi is looking for is an ON and OFF midi not to trigger the scenes. bellow is a link to the user manual for emulation. on page 26 you will find the list for what...
Topic
Blizzard HOTBOX exa Profiles
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
eNode 4 pre-sales support questions
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Satura Spot LED Pro Profile
I am having issues finding the correct profile within CompuShow yet again, this time with the Satura Spot LED Pro. I have downloaded the updated profiles online from Dropbox, however, they still seem to be missing something. There are 22, 24 and 32 channel modes for this fixture and the two versions online seem to only contain 20, 22, and 26 or a 19, 21, and 25 channel modes. Could I get an updated profile on this fixture please? Thanks in advance!
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
DS 250 Pro multiple errors
Hi everyone. When I tried to fire up my DS 250 pros today I was welcomed with several error codes including: Pan, Tilt, Gobo Wheel 1, Gobo Rotation 1, Gobo Wheel 2, and Focus (Channels 1-4,6,7,8,10). I have visually inspected the PCB boards and see no issues. Everything is connected properly and all the fuses are fine. It also passes DMX signal to the second fixture (which works fine). Any suggestions? I have these going to a convention on July 26 so I really don't have the time to send the...
Topic
Rayzor Q7 & Q12 Zoom Fixture Firmware.
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
GREAT FIXTURES
Hey guys just wanted to give you all a thumbs up for the great fixtures you all have, last week we sold all of our 26 power spots and washes to a club , we just purchased 8 design spot 575e's and 4 575e wash's and we used them for the first time yesterday and i gotta say we turned alot of heads and got alot of compliments about the fixtures and i also purchased the compulive 1024 and it is awsome. within 2 or 3 weeks we will be buying more fixtures to double up on lighting , still debating...
Topic
Bored, so I figured I would post some photos
This is actually from a few months ago when our company did Saves the Day/Day 26 (very odd combination I know). Specs are as follows (all Elation show minus front light, the Moles, and my console) 24x Opti Pars 3x RMD 620 Dimmer Racks 6x ETC ParNels 2x 2x2 Mini Moles 2x DP-640B Dimmer Packs 8x DLED 36 MHs 2x DS 575Es 2x PS 575 IEs 2x Antari X-310 Fazers 2x DMX Branch/4s 1x HES Road Hog All DMX Accu Cable 2x Motion Labs Power Distros First shot is FoH Second shot is the stage from FoH Third...
Topic
Magic 260 Question
I am about to hook up a Magic 260 to our system. Couple of questions I thought someone here could help me with. 1. When it says 24 fixtures, what if I have 26? 264 DMX channels are enough, but will I not be able to control the other fixtures? 2. Do I really need a special USB, "USB MEM STICK" or cable...OR can I use a standard USB jump drive/cable? Thanks, Corey
Topic
Nutcracker
So here it is, the Nutcracker I worked on a couple of weeks ago. Photos didn't turn out like I had hoped. I was taking them during the show while running lights, sound, and calling cues, oh what joy. Also looks like my cousin was playing with my camera again, but what can you do. Waiting for the video, a lot of effects lost without movement and I didn't get shots of the 1st act. Anyway, here are the specs: Road Hog Console 2 Mac 700s 2 DS 575Es 2 PS 575IEs 8 DLED 36 MHs 2 DLED 36s 2 Proton...
Topic
Assassins Photos
So here is that show I was talking about. It is called Assassins, was a great show. Here are the specs: 8 26 Degree Source Four (S4) Lekos, 6 36 Degree S4 Lekos, 8 50 Degree S4 Lekos, 12 S4 ParNels, 6 6" Fresnels, 9 Wide Par 64s, 20 40w Lamps, 9 Opti 30 RGBs, 2 Design LED 36s, and 2 Power Spot 575 IEs. Control was an ETC Express 72/144. Here are some shots: The Set: Sam Byck's Have It Your Way Monologue: Something Just Broke:
Topic
Trackspot profiles
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic
Emulation Stuck in Full Screen View
Hi guys, My Emulation build 26 is stuck in Full Screen mode. It will not let me out or let me switch to a different display size. I have to force quit the Mac. Any clue as how to fix this? Thanks!
Topic
MIDICON set up Mac
I just bought emulation and a midicon controller. I am running emulation 1.03 build 26 and OS 10.6.6. I've got everything connected and powering up, but the midicon is not sending MIDI to emulation. I see the midicon is online in the audio/midi setup. Also I opened an audio recording software and see the MIDI is getting into the computer. Any idea why emulation and midicon aren't talking? Thanks, Jeff Muir
Topic
playback faders & midicon
I have a request for a future build. I am using v 1.03 build 26 with a midicon controller. Currently when you are using multiple pages with the playback faders and the same fader is set to different levels (depending on page), when you move the fader it will jump to the physical location of the midicon fader causing the lights to jump in level. It would be great if the virtual fader didn't move until the midicon fader crosses the value of that virtual fader. For example: page 1 fader 1 set...
Topic
Design Spot 250 Bug
I have 1.03 build 26. I have 4 Design Spot 250 lights (not the pro). There is a problem with the fixture profile. When I turn on the prism, the light pan's 180 degrees by itself. I have the fixtures hung upside down so I have the invert pan selected in the properties menu. The lights still have this problem when I take this off. Any ideas?
Topic
Profile for Rainstar LC007
Hello, Just up and running with compu show. Completely new to the software as I never ran compu live. I am either looking for a profile to be made for Rainstar Lighting LC007(its a chinese adj megapixel knockoff, specifically 26ch mode; or, some instruction on using scan library editor to create my own profile. I know this much about the light in 26ch mode. ch 1-dimmer function. ch2- dimmer function. 3-red 4-green 5-blue and so on with rgb through ch 26. Thanks a bunch.
Topic
DesignWash LED 60 pan issue
Hey everyone, Yesterday I had a fairly decent-sized show with 26 Vari*lites and a dozen DesignWash LED 60's. Control was via a Martin M1. We ran two performances in the same day and powered off the entire rig while the theatre was dark. When we powered up for the second show I noticed that I had lost complete control of the pan function of one of the DW LED 60's. The pan motor was definitely engaged, however it remained positioned at roughly 45 degrees-from-centre and would not respond to...
Topic
Cue Cable problem
When I plug the cue cable into 3 pin fixtures...the software controls these fixtures just fine. I have Elation Opti Tri 30 LEDs which are 5 pin. When I use a 3 to 5 pin adapter (I have tried 3 different ones) I get no control over the lights. Under options I then get the following once I plug in the 5 pin. "this is not an elation cuecable" I do not get this when plugged into a 3 pin fixture. I have even tried coming out of the 3 pin fixture and then into the 5 pin fixture. Same thing...
Topic
Design Brick 70 II
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic
Revised - ADJ Mega Panel LED profile + some basic questions
I am understanding this more now. Now I know I need a more complete profile for the ADJ Mega Panel LED. I may take a stab at it in the Builder. Any assistance appreciated. Here is the manual for the light: http://www.americandj.com/pdffiles/mega-panel-led.pdf Specifically, I need profiles for Mode 5, Mode 6 and Mode 8, please, and , thanks! For Eumulation 1.03.29. A few questions... Is a terminator critical with this software and 8 Mega Panel LEDs? Is there any way to change the mode of one...
Topic
Crashing
Hey all - Like the package a lot. However, as I have been playing around trying different things I have gotten several incidents of crashing. I will post them here as they occur. I am on Mac 10.6.5 using Emulation V. 1.03.15. I don't know how much you need so I just copied like half of it and if I should do less just let me know. Process: Emulation [5314] Path: /Applications/Emulation.app/Contents/MacOS/Emulation Identifier: com.VisualProductions.Emulation Version: Emulation version 1.03.15...
Topic
Emulation Build 26 for Mac
The link for the Build 26 download for mac does not work. Any way I could download Build 26 or fix the link?
Topic
James Thomas Profile
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Topic
Looking for profile for Chauvet Colorrail 26 ch.
I am using the SD3 console. Thanks for your assistance in advance.
Topic
Are Playback Faders HTP or LTP + More
Hey Everybody! I'm new to this forum, and I had a few questions about emulation.... A few days ago My Prised ETC Expression 3 epically failed during a show, and I just don't have the budget to Buy a new Console, or get this one repaired! I have been playing around with the software and I like it. But One thing I'm having problem with is, Seeing wheather my ADJ Mega Panels Intensity/Strobe channels are Active(they are set on the 26 Channel mode). Is there Anyway to Tell this? Also, Are the...