Satura Spot LED Pro Profile

In This forum you can discuss tips, tricks, and troubleshooting for Elation's Next Generation Compu Live software, "Compu Show".

richard89Member

I am having issues finding the correct profile within CompuShow yet again, this time with the Satura Spot LED Pro. I have downloaded the updated profiles online from Dropbox, however, they still seem to be missing something. There are 22, 24 and 32 channel modes for this fixture and the two versions online seem to only contain 20, 22, and 26 or a 19, 21, and 25 channel modes. Could I get an updated profile on this fixture please? Thanks in advance!

8/6/141:03 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Try this one: https://www.dropbox.com/s/bcbc...ra_Spot_LED_Pro.ssl2

8/6/142:14 PM

❤️ 0

richard89Member

Thanks again! I must have missed it!

I did notice the elar_ex_tribar profile is not entirely complete. It does display as a bar, but there is no light emitted and the profile under the scene editor is off. Each fixture is actually displayed as 3. Having 34 fixtures displays as 102 in the scene editor. Any way this might be fixed?

8/8/148:24 PM

❤️ 0

Jingles8302Admin

Hi Richard, I see, that's a tricky one as the 3D doesn't do so well with light fixtures that have more than one beam output.
what channel mode are you using mostly? The reason why you have so many fixture representations in the editor is we give you a square PER lightbeam output/pixel.
But if you let me know what channel mode you are running yours in, i maybe able to tweak it for you.

8/11/141:20 PM

❤️ 0

richard89Member

I am using the 3 channel mode only.

8/11/148:54 PM

❤️ 0

Jingles8302Admin

so then just patch in a generic RGB profile from the _generic folder and that'll take care of that, one fixture icon per pixel.