Skip to main content

Worked on a lot of these, but here's a new one that has me stumped.

Lamp fails right around 2000 hrs.  Replace lamp, reset hours but next time the fixture turns on, "Replace the lamp" error shows up.  Lamp hours are back at ~2000 hrs.  Happens every time I reset the lamp hours.  Next time the fixture powers on, it will show the same error.

Swapped the main PCB, same issue.  Before I go down the rabbit hole or swapping parts, anyone seen this?

Original Post

LAMP HOURS RESET PROCEDURE
1. Activate the main menu by pressing MODE/ESC and toggle to “Information”.
2. Press ENTER and press UP or DOWN to toggle to “Time Information”.
3. Press UP or DOWN to toggle to “LampTime Password” and press ENTER. Then press
UP or DOWN to enter the reset pass code, “038” and press ENTER to confirm. The
display will automatically revert to “LampTime Password”, next press UP or DOWN to
toggle down to “Clean Lamp Time”.
4. Press ENTER and select “ON”. The lamp timer has now been reset, press MODE/ESC
to exit the menu and return to the home screen.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×