Tagged With "Firmware V1.18"
Reply
Re: Show Designer 3 manual question
You want to record presets.. Page 18 of the manual. I am not finding missing letters in the manual.. can you let me know what pages? <b>CREATING AND RECORDING PRESETS</b> Before recording a preset you must first do some preparation. In order to be able to view certain moving light channels like color or gobo you will first need to raise the dimmer levels and set the pan and tilt positions in order to see the color or gobo selections. Do this by selecting the fixture or fixtures...
Reply
Re: Demo Download?
Hey Jingles, Nice stage! I am wondering if you can design me a stage, that I can import into compu? I would have you build me one with lights and all, but I am looking at doing several different things with the stage, so I will add my own. I don't care about adding all the details, if you could just do the shape and layout it would be great! The stage is 45' wide, 16' deep, the ceiling peaks at 18' and goes down to 10' on the side walls. The only rounded shape is the front lip of the stage,...
Reply
Re: Design Spot 250 PAN Problem, Help!!
I had one of mine do that today. I hope it is a simple fix as i am starting my show in 1 hour i just had to swop it out. If you need to rent a few to hold you over let me know i have 18 in lafayette.
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Octostrip II questions...
My 1st questions is how exactly do you want to use them? When you say 7 controllers?? do you mean 7 Pixel Drive 80's or 7 control consoles? you have 51 strips in the cieling and 18 unused, so is that a total of 69? strips? 5 unused pixel drive 80's.. were those in the closet somewhere or installed in the cieling with no strips plugged into them. Help me out with some of these questions? Thanks,
Reply
Re: Help with getting current software???
Jon, EBAY for DMX cables, great prices!!! I run a 150' snake to FOH with 18+ fixtures connected with interconnects between fixtures on 3 pin DMX with my 2048, WITH a Terminator. Without an External OPTO DMX Splitter.
Reply
Re: Hazer/Fazer....confusion :confused:
OK. I get what you're saying. Oil produces better results but leaves residue. For me, that's bad. Not acceptable, due to the residue. water-based doesn't work as well but you don't have the residue. I can handle that. It sounds like the Fazer X-310II might be what I'm looking for. Use an Antari water-based fog fluid. OK, again, I'm good. Now, I do have questions still. I want DMX control, so it sounds like I need to buy the X-20II DMX module, which is definately acceptable. Just to be clear,...
Reply
Re: DS 250 case
ADJ and Elation have some ties to each other, so the chances are either company would probably know what a case would fit within their umbrella. Personally, the phone is my friend. I often work where I need fast and definitive answers. No doubt you are familiar with this sort of environment since you're posting here in the first place. People want something at the last minute but they've known about this for a while sort of things. Or, in my recent case, something just got sprung on me and...
Reply
Re: Magic 260 - 22 channel light !
Ah Ha - found out about the channel priority shuffling that the 260 will do - interesting that it doesn't appear to be in the manual...... Now - just one problem to resolve - The Pan Fine and Tilt Fine are actually channels 17 and 18 on the light (coarse are ch1 and ch2). Can't get the joystick to work on the fine settings. 16 channel config on the fixture would leave us without fine control which might be a bit too quick and jumpy if we tried using the joystick for follow spot...
Reply
Re: Magic 260 - 22 channel light !
That's what we have done.... Using fixture 1, the joystick on coarse works fine Using Fixture 2 - nothing at all on the joystick for ch1 and ch2 ( thats 17 and 18 on the actual lights). John.
Reply
Re: another noob question.....
Sergio, I have an Scene Setter 24 ch connected to two ETC Smartpack wall mounted dimmer panels. SS24 outputs 1-12 go to 1st panel with 12 dimmers and outputs 13-18 to second panel with 6 dimmers. The SS24 outputs are in sequence but actual light wiring to dimmers is mixed. How can I assign sliders to match the phisical light configuration (as suggested in your remarks)? Or do I need to rewire the dimmer panels to match SS24 sliders? Johnhrv The existing
Reply
Re: another noob question.....
Sergio, Thanks for your reply. I am not at our church to check the DIPs but all 18 outputs are working now using DMX. No the slider channels have not been changed. BUT, that is what I want to try but cannot find instructions. Can you direct me to a source of instruction for changing slider output channels. My other option is to re-wire the ETC Smartpacks. My objective is to get the SS24 sliders in the same order as theater lighting fixtures (now mixed). johnhrv
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: Lights doing there thing
Well we just got a new release today that has some bug fixes in it. If you want to try the new release here are the links for mac and windows. Windows: http://db.tt/CCerSOV Mac OSX: http://db.tt/NV2W8sH This gives you a version of 1.03 build 18 Sincerely,
Reply
Re: Emulation on Mac or PC
To be completely honest, both versions have their bugs. Some are similar, some are different. Build 18 for me on Pc can crash but I am able to program cuelists and generate chases pretty well. Sincerely,
Reply
Re: API Available for Compu Que?
I have the Compu Cue (with three black buttons and two digit led display). Just received it a few weeks ago. I downloaded ESA from web site. It shows file date of 12/1/2008 and the "About" box shows October 2008. The Compu Show version shows Jan 18, 2011 in the "About" box. The drivers were installed when Compu Show was installed. When I run ESA, it doesn't recognize the USB device. Have to start in "Demo" mode. Is there a newer version of ESA that I didn't see on site? All of our...
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: fixture profiles request
James, herewith links to manuals GLP Impression 90: http://www.glp.de/index.php?id...tend_push&docID=2805 Showtec LED PAR 64 Short 18 x 3W http://www.highlite.nl/silver....464_MANUAL_GB_V1.pdf Many thanks Paulnick PS, any chance of the midicon dims please?
Reply
Re: DS 250 Focus Lens going brown
I was hoping that I would not have to deal with this issue that seems clearly to be a manufacturing problem. But low and behold today during maintenance we discovered two units that have the focus lens glue starting to deteriorate. The units have only totaled ~ 900 hours on the lamp and it seems that the lens life equates to 1/3 of the lamp life? Will all 18 units do this?
Reply
Re: I/O Contacts
email me, and i'll send to you what I have found. But yes a thicker gauge shielded cable will be best for DMX. 18 Gauge would work or slightly thicker. You making your own cables?
Topic
New profile for SD3
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic
Blizzard HOTBOX exa Profiles
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
eNode 4 pre-sales support questions
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fixture Profile for American DJ Focus Spot 3 moving light
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic
American DJ Mega Tri Bar
I loaded the profile for the American DJ Mega Tri Bar, and the light comes on, but only one of the 18 tri led's eliminate. Am I using the wrong profile, or could there be something wrong with my fixture. Any help will be appreciated...
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
Scene Setter 24 Moron
I am a complete moron on the scene setter 24. I understand DMX addressing. I have a 4 channel dimmer at DMX1 I have another one at DMX5 I want sliders 1-4 to control the intensity of the first 4 lights Slider 508 the second set. I have a stage ape ape coaster at channel 13. I want 13-18 to control it. Right now I have no control of any light (it was working yesterday but I think I accidentally hosed something) I want to assign flash 1 and slider 1 to DMX1, flash 2, slider 2 to DMX2 etc... I...
Topic
mini moving wash, 18 x 3 watt
Good day everyone. I created a profile for a new light that I am using. It is an 18 x 3 watt led mini moving wash. 12 channel. I added the page to my test show and it works as it should in real life. I then went in to the 3d visualizer thinking I could start creating scenes with it. To my dismay, I discovered that the fixture in the visualizer was moving how it should but I could not get the lamp ON in 3d world. To be clear, the fixture works in real life, it even moves the same in the...
Topic
Chauvet Library / Par-Quad 18
I am using Chauvet Colordash Par-Quad 18s and want to be sure I am using the best profile from the library that utilizes all the features and options available. Currently, I am using the Chauvet par 7 profile. Is this the best to use, or will a new profile need to be created for all features and options to be available? I did attempt to request a new profile via the email address provided, but got a bounced message saying the address was not active. <request> I am using Compushow and...
Topic
Rayzor Q7 & Q12 Zoom Fixture Firmware.
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Show Designer 1: programing multiple lights as one fixture
Hi, I'm new here and just bought a Show Designer 1. Can anyone tell me how to program multiple lights to be controlled by one fixture channel? The Show designer controls 16 fixtures, but I have 18 lights that I need to control. I know that you can set up the controller to control a group of lights from one fixture channel, I just don't know how and the instruction manual is of no help. Thanks, Dan
Topic
Magic 260 scene fade issues when using recordable preset points
I just finished programming some 200+ scenes using my recordable preset positions (I created positions for all 18 presets) for the pan and tilt positions of my fixtures (accuscan 250's) putting together shows with them I noticed that When I playback the show i have no control over fade time yet when I program scenes without using the presets i can control fade times easily this is very frustrating as all I can get with these scenes is very jerky movements and unable to create slow sweeps as...
Topic
Design Spot 250 Mystery
I have 18 design spot 250s in my lounge. I am having trouble with 2 of them. One is contently dousing the lamp. It will remain off for about 15min and then strike its self work for about 30min and then douse itself again. I have it set so I can strike the lamps from the board. I have replace the lamp and checked to see if I accidentally put the lamp off commands in a couple of memorys. No such luck. The other one is not as bright as the others and is kinda yellow. I have replaced the lamp...
Topic
SD3 losing control of LED 36's
SD3 (v1.12) controlling Color Bar of 18 LED 36. During some scene changes, total loss of control of the LED's while the fader controls continue to work. I can sometimes run through the same scene changes several times with no issues. Programed 5 new scenes as a test with the same results This problem started about 2 months ago and is getting more frequent. I have been told that certain "playback" modes programed into the scene may be the issue. I ran through the scene changes in Solo mode...
Topic
Design Wash Led Question
Hey guys, I had requested approximately 18 Tri Pars in a quote for our new church building. I recently came across the Design Wash Leds and I am considering maybe going with some of them in place of the Tri Pars. I will not be using conventional lighting, it will be all led and discharge fixtures. My question is, for the downstage truss which will be approximately 10' away from the stage, would I be better of going with the Led Pro, or the Led 60? In other words, how does the Design Wash Led...
Topic
Show Designer 3, Technobeam, Color and gobo chases
I am using my SD 3 for the first time this week. So far I am making only fair progress on programming, but hope to make more progress tomorrow night. Anyway I am having trouble figuring out how to get the built-in color and gobo chase patterns to work. This is when you want to record a chase and the board gives you options on what kind of chase...shape, color, gobo, etc. I have tried the motion chase patterns and they are working as intended. However as I said when you select a color or gobo...
Topic
Operator 192 questions newbie...
I recently just started this lighting stuff and got confused real quick... So I started off by setting up the lights then carefully trying to set the right channels 1st lights are chauvet minwash and set them at channel 1 with the 13 channel option,they are 3 of them and all set to the same channel 1 2nd set of lights were the chauvet colorstrips and they were set on channel 14,they are 4 off them and they were set with the first one as a master and the rest as slave lights 3rd set was 2 led...
Topic
Octostrip II questions...
One of the clubs I oversee is currently using 51 octostrips in their ceiling, but they are not working the way they are supposed to. There are 7 controllers using 24 channels each to operate the strips, and some how I have individual control of all 51. Not that I'm complaining. Well, they have 18 unused strips, and 5 unused controllers (pixel drive 80's I think??) that I attempted to use today without success. All of the controllers will operate stand alone, but when I try to set them up the...
Topic
Looking for wash lights for large area but with lots of other features
OK, I'm working on an event that is a shadowcast for Repo: The Genetic Opera. No comment. I'm going to leave it at "this is a job" and enough said. Stage area is 31-feet wide and 18 feet deep(usable). Stage is 4 feet high. in front of this is an open area, approximately 50 feet wide at it's widest area and I think 16-20 feet deep. I know they stuff a wrestling ring in there but am not sure if it's a 16, 18 or 20-footer. Pleae don't ask me why I know this much about wrestling rings, OK? Long...
Topic
ICE-101 and freezer packs
OK, got my ICE-101 on December 4th, fired it up for the first time with a bag of ice in there on December 5th. I still need to learn some of the nuances of this machine. Let's say that I'm pleased with my purchase. 1: DAMN that pump is loud. The pump to get rid of the melted ice. I take it I should pump out at the end of the night only. Obviously, if the unit can hold 20 pounds of ice, it can hold 20 pounds of ice water. No reason to hook up the drainage tubing until the show is over. 2:...