Tagged With "Firmware V1.09"
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Crashing...Crashing...Crashing
Ok So I used my Mac setup over the weekend, and it was horrible, Elation would be up 5 minutes, and crash, or the green light would go out on dongle, and would need complete reset. I ended up just using the backup Magic 260 I had with me. Problem was it did not have enough channels for all the lights, so I could not change color of all LED cans, some were stuck on color when Cumpu Live quit. Today I tried the setup on a normal Windows Laptop. 1.46ghz 512ram. It isn't the fastest, but it is...
Reply
Re: Want to be notified of new compu software and interfaces??
??? I thought it was at the end of Jan/Early Feb edit Also I have an email stating the update was supposed to come out of Jan 09! Said the update was going to fix the LED issue in the 3d software... Misbeam's angered post is starting to come to life
Reply
Re: CueCable drivers for Vista and Windows 7
Hi James, Read through this. This is what is coming up in my C: Promt Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>cd \Program Files (x86)\Elation\Emulation1028\drivers\win64 C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>install.bat C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>wdreg -inf windrvr6.i nf install WDREG utility v10.10. Build Sep 2 2009 09:43:37 Processing HWID *WINDRVR6...
Reply
Re: Robe Dominator 1200 XT
I guess I thought I knew a lot about this software. So to get this right. You're saying the most recent profile 4/09 for the Robe Dominator 1200 will work on all mirrors but I need to program the fixture in the master page instead of in page mode? If so. I don't know how to program it in the master page. Is that in the manual or can you post the method to do that on YouTube?
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: SD3 - External Software?
Posted 02 March 2011 09:59 AM Hide Post Sorry, I was asking about The Virtual Compu Live Software. I have a SD-2 and a laptop with windows 7 only. Regards, John
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: Profile for X-Laser
That would help her it is http://x-laser.com/manuals/XSeriesManual07-09.pdf
Reply
Re: Profile Needed - Elation ELED DW PAR56
Hey Jim, Here is the profile we created to solve this problem. Copy your Elation.xml file to your user folder under Common/Personalities/User Open the file and add the following to the bottom of the file before the following text: </manufacturer> </personalities> <model label="DW" class="Led" alias="ELEDPAR56 DW"> <changelogs> <change username="Church-Technologies" notes="Changed color names for ELEDPAR56DW" date="2012-04-04" time="08-09-10-37" />...
Reply
Re: Setting dip switches
@billyboy, let me jump in. The DP-415 has dip switches based on the binary code standard. This means that each dip switch is double the value of the one before it. If you look at the image attached (DP-415 Dip Switch. will see the 10 dip switches and above it the values that each creates. Switches 1-9 can be combined in any configuration to create a number from 1-512. This will represent the starting slot (sometimes called an address) of the DMX signal that the pack will respond to. Because...
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
eNode 4 pre-sales support questions
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
Rayzor Q7 & Q12 Zoom Fixture Firmware.
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Magic 260 and MIDI
Hi Friends, on August 17 2008 User "Davey Boy" wrote: Now I have the same problem. Why is there no response on how to control the Magic 260 with MIDI? And I have a second question. Which function has the led over the Delete-Button. I've never seen this led has shone, wether I pressed the Delete-Button or not. Thanks in advance!
Topic
Design Spot 250- 2 fixtures with individual problem
I searched through the forums and did not see a similar post so hope this is not a repeat. I have 2 DS250's which I bought about 2 years ago. I have only used them about 20 times, at about 4-5 hours each time so they have very little run time, yet they both have a separate issue. Fixture 1- The fixture was last used on 5/9/09 (yesterday) with no problems. On 5/10/09 (today) I turned onto check which of the 2 fixtures had a custom gobo, and during the initial setup when it was first plugged...
Topic
Magic 260 and MIDI
Hi. I am trying to figure out how to control the Magic 260 controller via MIDI. I searched the manual and on page 11 it says that "When connected to a MIDI sequencer, keyboard, or any other type of midi signal generating device, scenes, shows and the blackout function can b accessed remotely" However, the only other documentation is a chart on the the last page, page 34. It gives values, which I assume are MIDI program change messages, that supposedly call up scenes and shows if sent on the...
Topic
3D issues with sept 09 update
Im having a file size issue with the 3D viewer. For some reason all my 3D files sizes have increased in size and now it takes forever to load them?? Iv never had this problem before. Iv reloaded the soft wear and even gone back to that nov 08 version. Kris Burl
Topic
all lights on one page
i have 2 dp 415s dimmer / relay packs with 4 par 38 cans on each one 4 roboscans 812 and 2 adj mega pixel leds is there away to put all these lights one 1 page ? im using the compu live sept 09 update if so how please ?
Topic
icon question
I'm using the compu 1024 ec sept,09 . I'm trying to make my own icons for my switches. What size do they need to be in pixels and what fotmat do they need ti be in
Topic
Trackspot profiles
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic
Error's on SD3
Hi @ all... May be some of you can help me, by starting the SD3 today was a mad configuration of bright LEDs to see and on display wars written something like: "Copyright error ..." I had no change to start the Desk normal. OK I have removed the battery an waited awhile after that time the SD3 starts normal but now I have a lot of "Memory error 01 -09" each typ... Is there a chance of a "master reset" to have a clean new memory? May be by a key combination? On SD3 is the software 1.15...
Topic
Design Brick 70 II
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic
Design Spot 250 multiple errors
One of my original design spot 250's will run fine for a few minutes then starts having issues. It appears that the first thing to crap out is the shutter then everything but the pan and tilt. I can reset the fixture and everything will function again but only for a few minutes before the same errors occur. Eventually resetting the fixture does nothing and i get the following errors: 05, 06, 07, 08, 09, 10, 13. Any suggestions?
Topic
James Thomas Profile
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Reply
Re: Silent moving heads?
Hi guys, nothing in the works at the moment. But maybe in 09'. I've looked alot into this technology, and I like it. Especially since we are working on moving into the church lighting installs, this issue has come up alot. So I won't rule it out. Thanks EBAC for your insight! Best regards,
Reply
Re: External MIDI Trigger for BMP Rate
Matchless.. see if you can wrap your head around this. 1. create scenes or switches with 1 color each 2. create cycle with each of the colors 3. change the time for each scene/switch to GO inside the cycle 4. now when you click PAGE-DOWN on your keyboard, you control the timing of the cycle 5. to assign this PAGE-DOWN control to MIDI, open the CONSOLE window 6. right-click on the MIDI controller button that you want to use (any button will work) 7. you will see a blank area with 4 icons to...
Reply
Re: How does everyone organize their scenes/switches/etc
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply
Re: Trouble with Compulive
Actually its a 64. Can you tell me what the difference is and why there is one? We thought 64 would be better, but now im not so sure... Also, im confused by the dates and how the Sept 09 edition is more recent than the Dec 09 version, but since im using 64 bit, will I even have access? Thanks again for all you help James, Ive got a show this weekend that Im hoping to be up and running for and a BIG show June 12th that I have really got to get moving on so the sooner I can figure this out...
Reply
Re: Upgrading
ya sept 29 2009. Save your work files and any custom profiles you may have made or received. save them to a thumbdrive or even your desktop. I recommend uninstalling and deleting the SL2006 folder then install the sept 29 09 version. Sincerely,
Reply
Re: Major Problems
Tried something else... I will work on backing up files so I can fully remove and re install program. I hooked midicon up to another laptop, my mac with windows in parallels. Normally I run with this but it has been know to be unstable but figured worth a try. I am running Sep 09 Compu06 Software on that one as it is nice and stable. I tried the shift right click in this and window would come up. I would hit button on midicon, and would get error "midi command is not assigned in the...
Reply
Re: firmware update
What reason could there still have the controller does not take over the fixtures. The controller loads the. Wcn file correctly but does not show the new fixtures. On the controller are not the 4,6,8,16, Channel original fixtures available. Could it be the USB driver or the programmupdaters Ver. 1:09 be? Can I do a reset on the Magic 260? Thanks for the help greetings from Germany / Bavaria Rudi
Reply
Re: firmware update
What reason could there still have the controller does not take over the fixtures. The controller loads the. Wcn file correctly but does not show the new fixtures. On the controller are not the 4,6,8,16, Channel original fixtures available. Could it be the USB driver or the programmupdaters Ver. 1:09 be? Can I do a reset on the Magic 260? Thanks for the help greetings from Germany / Bavaria Rudi
Reply
Re: Problem with eNode 8 Pro / sACN and ETC Gio Lighting Desk
Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.
Topic
SixBar 500 Firmware
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
ACL Bar 360 Fixture Firmware
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
DTW Bar 1000 Fixture Firmware
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com