Tagged With "lamp socket parts store"
Reply
Re: scene setter 24 dmx channel addressing
Hi, try these videos to see if they help: https://youtu.be/wu34OR7BtOA Part 1 https://youtu.be/Zsrpw-PEJxY Part 2
Reply
Re: Show Designer 1 Bricked
To whom it may concern, The display PCB's have changed in time but it's the same operating system. It could be either a bad display or a bad PCB inside. If it's within the 2 year warranty your best bet would be to send it in for warranty repair. You can always send an email to rma@elationlighting.com to set you up with a RMA to send it in. If it's not under warranty anymore and if you have another working unit with the same color display, you can always start by trying to swap out the...
Reply
Re: Stage Color PARCAN Mix Wide Angle Lens
Jim, If the unit you are talking about is the Stage Color, then yes they are the same lenses as the Opti Par, they just snap inside the front of the Stage Color. You can order these parts directly from Elation Service 866.245.6726 Part numbers are: Opti/LN - Narrow Opti/LM - Medium Opti/LW - Wide Thanks!
Reply
Re: Stage Color PARCAN Mix Wide Angle Lens
Thank you, Thank You, THANK You Everyone, esp. Mike Lights Thats what I thought! You know I looked at both sales brouchers, side by side, back and forth, zoomed in, zoomed out, and said it has to be, but still wasn't sure, and trying to search the internet for JUST THAT part was impossible. Thanks for confirming that information. It IS greatly appreciated!
Reply
Re: Design Wash 250 profiles
Hi John, Thanks for the quick reply. Unfortunately the console has been part of the house system which they are using to control some prooven reliable Entours 250 and other Martin gears. They can't return the console. I'm trying to introduce/integrate the Elation professional products with other "industry standard" professional products. I just inquire to see if others have use this kind of set up. I will try to contact Marc of CASE console again for assistance. Regards,
Reply
Re: Design Spot 250 colour wheel
Yes, we do have a new theatrical DS250 color wheel. The part number is DS250CW2. To determine what the best way to replace it on your specific fixture and to order the part, please give a call to Elation Service at 866.245.6726. Very soon, we plan to have 2 different fixture models for the change in color wheel.
Reply
Re: T-4 Controller Fuse
I think this would be you best bet for parts from american dj... http://www.americandjparts.com/ProductDetails.aspx?Item...oductLine=PART&Qty=1 From another place... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140043778731 -Homeboy
Reply
Re: Elation T4 Four-Channel Chase Controller
well does it have a knob to adjust the mic response?? like a sensitivy knob? also i forget the term for kick drum mics but go into ur local guitar center or music store and ask the audio person im sure they will help heck even ask the lighting sales person to help out. peace! jingles!
Reply
Re: Why dosen't Elation have a parts section
To whom it may concern, At this point in time Elation Service is limited on parts for the ACTIVE SCAN. That light has been discontinued for quite sometime and some parts are currently out of stock and on order. We do have the lamps in stock. The mirror and socket are also available. The main PCB's are currently out of stock and are on order. If you like to place and order for this lamp or any of these parts feel free to contact Elation Customer Support at 866.245.6726 (8AM - 4:30PM PST.)...
Reply
Re: question for a friend.
This is a frequently asked question, and the best answer I can give is that it is possible, but very difficult. The Compu Live spotlight feature will work in lining up a group of fixtures together and focusing or moving them on a single position. The difficult part is the variables involved in using a remote spotlight, such as smooth pan and tilt movement, hard stops on an individual point, and the persons ability to accurately execute a real time followspot effect on the controller. As far...
Reply
Re: Stupid Question but help
ok gn. del. 1) you se in the pic i posted at the top the lil circle with "3D" in it. click that that will re load ur 3d viewer. it looks like this: 2) your gonna want to use the program that comes with the emo called "easy show" it should be on your desktop. 3) to synch the lights to the music u have to first program some scenes and name them or just remember which ones they are. i use the master page alot for this. this is a really deailed part of programming on compuware. maybe i wil make...
Reply
Re: DMX Operator 192
no on the op u have 30 banks of 8 scenes each. and 12 chases that can hold up to 240 scenes. so basically u cna have 1 chase full to the max of 240 scenes which is like putting every scene u can record on the operator into a chase. so let me break it down even further for ya. u cna store any scene as many times as u want and in any order u want in a chase as long as don't go over 240 scenes but u can also continue on ur chase into the next one. i have done that and it works fine. do u know...
Reply
Re: RSER message
sup guys! Just wanted to let you guys know that i called Elation service center today and i explained my situation and they told me try some stuff and well in the end turns out the main circuit board (mother board) is burnt.Due to a power surge that happened the last time i used the lights. I didn't think it was that cause all the other lights work fine.anyways got the part ordered.I'll let you guys know what happens when it gets replaced.Again thanks for everything.
Reply
Re: RSER message
Yes.. I am sure if you contact the service rep who took your order will be more than happy to take the part back. Keep in mind that anything is possible with moving lights.. They are like cars.. sometimes you need to see what's under the hood of your car. In many DJ lights, they say don't open your lights or your void your warranty. Not true with Elation lights. They are made to be opened up and serviced and checked out. This is what makes them run longer than other fixtures. Best regards,
Reply
Re: Design 36 LED
switch 7 and 11 on for stand alone mode. 1+7 on = program 1 2+7 on = program 2... All of the programs except #8 (seitch 1+3+7+11) have a strobe part that makes the program look bad. If this is intended then it seems like a mistake.
Reply
Re: Design 36 LED
ok actualy i was talking with elation today and it looks like there is an error of some kind there in FACT is no 7 ch. configuration for this unit. i apologize. i figured since there was an offical trait cut sheet then it had to be true. i don't work directly in l.a. with the rest of the guys im out in WI. and sometimes get out of the loop on things and i haven't had the chance to really demo the DLED 36's. i apologize for any confusion due in my part. elation will be taking the 7ch trait...
Reply
Re: dj spot 250 & dj scan 250 HELP!
Hey Jake, If you can't get the club to install switches,try a remote switch,you can get a generic wireless at the hadware store for about $25 each.If the lights are too far apart you may need 2 receivers,but it will be "Slick" Good Luck. Gary
Reply
Re: CYM 250 Zoom Macro
the preprogrammed macros are like mini programs built in to the DMX values of the fixture i don't believe there is a way to overwrite these as it is part of the programming on a chip in the fixture but you can simply not use them. also you never know u may end up liking all of the macros or most of them. trust me the CMY zoom is very cabable of doing lots of cool things! peace! jingles.
Reply
Re: I Can't Decide!!!!
This is in a chruch and I will be running all the house lights this way as well as any concert or theatre type lighting up front on the stage. There are 12 rows of house lights, each 600w per row. I want to be able to dim them individually so they will stay broken into the same sets they are now, just putting a dimmer in the line. I also have 4 can lights for the stage that are 1000w each. I looked at the Elation DP-DMX20L last night at the store and I was surprised that right on the front...
Reply
Re: Hey Guys!!! I'm Back . . . again
a pair??? is this good or bad?? also jon look at his location on the bottom of his post. also me and tiger got a lil surprise in store involving elation and compu and that is all we are saying till it is done!
Reply
Re: Show Designer 3 manual question
You want to record presets.. Page 18 of the manual. I am not finding missing letters in the manual.. can you let me know what pages? <b>CREATING AND RECORDING PRESETS</b> Before recording a preset you must first do some preparation. In order to be able to view certain moving light channels like color or gobo you will first need to raise the dimmer levels and set the pan and tilt positions in order to see the color or gobo selections. Do this by selecting the fixture or fixtures...
Reply
Re: Stage Pak 1 how to set up?
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply
Re: Riva 80
Just realized what a noob I am. Posted in Moving Heads section.. MODs feel free to put me where I belong if needed. Thanks James. Had some of the guys at the LAB (pro sound web) direct me to you here on the forum. The music store I sub-contact under just spoke with Elation at the NAMM show but I doubt any dealership agreement was finalized. But, I have 2 churches needing theatrical style lighting installs by Easter so I gotta get this stuff moving FAST! Any primers or how-to's on...
Reply
Re: Design 36 LED
Yea, going in two diff. churches. (order will be for Magnolia Music Center - Gulfport, MS) We are new so I'm sure we have to pay for it all up front a few times before we get "terms". HAHA! 8 DLED 36, 2 DLED MH, and 2 Design Spot 250 fixtures go to one church. 10 DLED 36, and 2 Design Spot 250 fixtures go to another church. Both will go Compu Live for control. (and yes, James has laid out one 3D for me and might be working on the 2nd one soon) Plan on having both installed and trained by...
Reply
Re: Design 36 LED - Initializing Problems
Thanks John! Yes, it is still under warranty, so I'll probably go that route. Main PCB, eh? I'm guessing that's a pretty critical part (like $$$$, not under warranty), right?
Reply
Re: Design 36 LED - Initializing Problems
i'm not sure.. the most expensive part in these units are the LED's themselves, and the PCB that holds the LED's.. the main pcb is simply the card that holds information. These aren't to expensive. But if its under warranty.. that's better!
Reply
Re: basic console programing
Depends on the show Drew. More complicated shows generally have time to program, and its just like Elation_Pro said, someone hitting 'Go'. Sometimes, it is linked to time code, so no one is even hitting go. Cruise ships are a good example, all the shows run off of time code, and the show starts when the sound guy hits play. The fun shows are the ones you have no idea what you are getting into. It is even more fun with movers. Running movers on the fly is often called busking. More powerful...
Reply
Re: General uplighting for sanctuary - suggestions?
I can't. Im at the tire shop putting new ones on the work van. Just happened to have the store laptop with me and an ethernet cable. Otherwise I'd be stuck watching Christy Yamagoochie on the only TV station they get in this place. HAHAHA! But yes, seems the 2 options are either a low profile up-light from the crown molding along the sides, (traditionally churches put florescent bulbs here), or some sort of tiny can(or long thin) fixture on each beam washing down on the congregation.
Reply
Re: Is there a 250 spot that will mix color like this?
oh ya sorry I guess I Musca forgot that part in the video. Sorry. Yes you simply hold down the shift key and it will move all the relative faders for the same fixture types. For e ample if u have 4 ds250's and 2 power spot 250's and u click on a ds 250 fader and hold shift it will move all the ds 250 faders for that channel. Sincerely,
Reply
Re: What are some other uses for moving heads at weddings?
Lighting doesn't just light. It helps set the mood and accents the room as well. Movement is also a part of lighting, and with it adds another dimension. I have done a ton of shows which I just have movers slowly moving around the room for glow and effect, other times just changing and shooting gobos on different targets for effect like this: Sorry for photo quality, camera phone. But the center piece I have 2 Mac 700's shooting on it using different gobos and colors for different things at...
Reply
Re: Newbie looking for help/advice
Thanks for the explenation, it really helps me understand this stuff better, and what I need to get. so does this mean that you have 96 pages for each book or 96 pages total for all 8 books put together? And you mentioned the DMX opereater Pro. Is this a good controller? It seems to have everything on it that I would need. And how hard is it to program these "pages". Does it require the use of a computer program such as compulive or can I do it simply and manually? (I understand if you don't...
Reply
Re: ADJ X-Move LED moving head...will there be an elation version soon?
Wait. I knew it was one 20w LED, but a white one? That makes no sense at all. LEDs don't emit the full range of visible light. This is why when you have RGB all on, it is not a true 'white' because they don't cover the range to make white. Color media, be it gel or glass, work by blocking certain parts of the visible light spectrum to make color. So we have a source that doesn't emit the full range of visible light with color media to try and change it different colors? Even if they were...
Reply
Re: Where do I get fixture profiles for Elation DLED TriBrick 36 and Tri64B?
i hear ya. sometimes it is impossible the way the profile creator is made. Has anybody here ever tried making there own profiles? how would you like it to be part of your job? lol. sincerely,
Reply
Re: design 108
Yes it does. I am still wondering if they are going to make different plates for them like Coemar has for their ParLite LED series, which is the direct comparison to Elation's DLED36. I have actually found that musicians love the LEDs over conventionals do to the lack of heat. They also love that I can get 'high' powered lights into a space with little to no power and not have to worry about tripping breakers. The nice part when someone thinks something is too bright, dim it. And then when...
Reply
Re: design 108
Have you ever tried tricking the LEDs into the white you want? What I mean is, if I want a more 3200k white, I drop out some blue and a little green and run the red full up. If I want a more 5600k, I drop some red out. This lowers the total output of the light in 'white'. However, it gets me what I want out of the LEDs without the need for white and amber LEDs. More LEDs means more money as well as a larger unit physically. One of the great advantages to LEDs is that they are small yet...
Reply
Re: FC-192 Capability?
I'm in the same situation. I understood any midi foot controller can do the job. My first attempt though didn't succeed. I need to experiment further. I would have hoped the initial settings on the foot controller would ( for the most part) pair up with the banks/scenes of the DMX Operator.
Reply
Re: Pan Limit on DS250
Man, I hate it when I spend the time to type out a long post, then turn around and figure out the answer to my own question!! Anyway, instead of deleting the question, I figured I would post the answer in case anyone else had the same problem: It seems that my INIT scene in my Design Spot 250 PAGE had all the pan channels set to 85...go figure! So, of course I just set them to 0, saved, and now I'm rockin' and rollin' again. I guess sometimes you just have to ask the question to trigger the...
Reply
Re: Octopod 80 or 36?
Actually, i figured programming would be easier on a computer or you could load programs from others into your computer. But the most important part is EZ. If a little programming w/ a low-cost console wouldn't be too much to think about while performing, that sounds like a decent option. What console do you think? Jazzman
Reply
Re: Okay, I think this is a bug. (cycles)
Hi Jingles, I was clicking the scene button, becuse I thoght I had to choose what type it was..i.e. scenes, or switches. Anyhow, unfortunatly it will not let me send the bug report out, keeps trying, and I do not have an e-mail client on this machine. It would be nice if it wrapped up the errors and saved it into a file I could e-mail on my "connected" machine. On the other issue, I tried to open the cycle, and run but, all I got was a blank page no buttons at the top! I tried running the...
Reply
Re: Show Designer 3
Thanks for the response. I'll look into the complex chase further. As for the second part, it looks like the answer is no. I realize a board such as this can be used in many applications and it's not possible to make it do everything....however you may wish to think about this for future software revisions. Two examples of where this would be useful : A live band has an unexpected artist "sit-in" for a song or two, you still want to run your pre-programed show, yet you want to grab one...
Reply
Re: Compu Live Scene Creation
Joel that's what i thought you were referring to. i get this also with my heads. i know of no way to fix this. to me it is just part of the program. Sincerely,
Reply
Re: Design wash 250's
the one on the left also acts weird when mixing colors. see how there is some blue in the lower part of the beam.
Reply
Re: dmx operator pro CF
Hi, thanks for the reply, I just got off the phone with one of the dealers that suppy that console and they tell me again that a card from the local electronics store formatted to FAT will work ok, I bought 2 of these cards in faith, should the dealer refund me the cost of these cards I bought.
Reply
Re: COMPULIVE: Quirks or bugs, and some recommended Enhancements.
Okay, This is really getting VERY disappointing with Elation. Compulive.... What is it, and who is developing the software? (SUNLIGHT?????) I created this thread back in August of 2008, it has now been 4+ months, and still have NO resolutions what so ever, other than a November update, (which quite frankly looks like the August "Beta” just as a General Deployment with no changes). I have been asking for information regarding the NOV update, and what’s been changed in the new release, and of...
Reply
Re: Scene Setter
Geek3, You can order them directly from the American DJ parts website, Part # Z-SCENE/B10K or by phone, call 800-322-6337 and ask for parts.
Reply
Re: Understanding the DMX Operator
Thanks James, I think I get it. I'm not sure where I got the 32 from ... looking at the online manual for that I can clearly see it's 16 ... which is plenty. So to build on your explanation, if I turn on fixture button 1 and 2, then fader 1 is acting as a fader for channel 1 and 17 at the same time, correct? Is it safe to assume that fader one is actually designed to continually send out data on channels 1, 17, 33, 49, 65, 81, 97, 113, 129, 145, 161 and 177 and then the scanner buttons just...
Reply
Re: Understanding the DMX Operator
I'm jumping into this a bit later than I normally would, but I don't normally read this forum, despite the fact that I should. I have the DMX Operator. So, I know how it work quite well. I can't say I know it 100% inside and out, but I can get around it quite easily. I need to refer to the manual for programming it because I can't recall those steps. Other than that, the DMX Operator is my buddy. It is my reliable fall back for MyDMX. Issue 1: The scanner buttons. Each scanner buttonis...
Reply
Re: Scene Setter 48
Thanks, Can you tell me one more thing, where can I get the User Manual (PDF) for my Elation Scene Setter 48 It was before ADJ took over that part (I think 2005 version) I want a manual to keep consistent with the stuff on my board even though there pretty much the same thing expect for new slider style and button style LCD vs LED, Elation vs ADJ logo, and DMX polarity switch. I am just going to print it and put it in a binder with page protectors.
Reply
Re: syncing to mp3
MBT Welcome to the forums. You can still use easy show but instead of live triggering it. save it as a cycle on the master page. and then once the cycle is created you can then simply play it back however the audio wont be a part of the cycle. But there is another work around for that if you intrested. let me know. Hope this make sense. Sincerely,