Skip to main content

Tagged With "Firmware V1.0.5"

Everything
Reply

Re: scene setter 24 dmx channel addressing

Luis ·
Hey Carl, To assign the DMX Channels on "ADJ" branded version of the Scene Setter you will need to do the following: 1. Enter Program Mode by pressing and holding the Record button and entering 1, 6, 6, 8. 2. Enter Channel Assign Mode by pressing and holding the Record button and entering 8, 8, 8. 3. Once this has been done the display will read 001, you can now use the Up or Down button to select the channel (1-512) that you want assigned. 4. Once your desired channel is displayed, tap the...
Reply

Re: E-Builder

Jingles8302 ·
Hi! No worries! I actually kept a Dropbox folder of ALL Emulation and E-builder releases i got and that we saved, here is the E-builder folder I have: https://www.dropbox.com/sh/8tg...hO3bOKXx61va_2a?dl=0
Reply

Re: Compu Pro 06?

Jingles8302 ·
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply

Re: Compu Pro 06?

ebaclights ·
I am not using any lights yet, just the viewer. I am only working with conventional fixtures on the program right now, so there is no home position. The lights fade out fine when I make a "fade out" button, but changing between scenes is what I cant get to work. Basically Say if I fade up fixtures 1-5 on my first scene, but on my second I want fixtures 6-10 to fade in, but 1-5 to fade out.
Reply

Re: Compu Pro 06?

ebaclights ·
I have 5seconds in the first fade box(fades in just fine) and I have 5 seconds in the last fade box (does not fade out)
Reply

Re: Compu Pro 06?

Jingles8302 ·
try putting the last 5 sec. in either the first or second RED boxes. and i will do the same and let u know what works for me!
Reply

Re: Compu Pro 06?

Jingles8302 ·
ok i got it! what u want to do is put a 5 sec fade time in the second blue time box. the one with the solid blue line going up and then u want to put the last time (fade down) in the last red time box. the one with the solid RED line going DOWN! ok? try that and let me know!
Reply

Re: Help w/ DMX addys

homeboy ·
The first pack should have only the first dip switch up and the second should have only the first and third up. This will make the channel 1 for the first and 5 for the second, thus covering all 8 channels you want. No, you can't separate the two plugs so you get 8 channels out of each pack, its strictly 4 channels. However, yes you can add more packs and "piggy back" or "daisy chain" (which ever term you prefer) off of the DMX outs from the last dimmer pack. You should already be doing this...
Reply

Re: need to know???

Jingles8302 ·
hey guys im doin it now but i find cause i have three reds in this fixture i think i does not sem to want to let me use 3 of em just two! also am i to click on the channels and enter in the numbers and signs for the channels patched to several diffeent outputs?? so for example that says 1= 0+1/40/60 and i enter in that in the box?? am i doin this right??? help me!! peace! jingles out!
Reply

Re: Opto Branch

elationpro ·
TAP is correct. However you should have both 3 and 5 pin outputs. If you get a 3 to 5 pin turn around you can actually use all 8 outputs making it an OPTO BRANCH 8. works great.
Reply

Re: Compu Live Questions

Jingles8302 ·
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply

Re: Compu Live Questions

matchless1 ·
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply

Re: Compu Live Questions

matchless1 ·
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply

Re: Compu Live Questions

elationpro ·
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply

Re: DMX Operator 192

djinsomnia ·
Oh ok makes sense now. Now this is a new question, I have 5 lights right. So lets say I hook up all 5 lights one way at one event. I assign the pan/tilt channels to the joystick. Now if I move the setup around, and the units are running under different #'s, do I have to re-assign the pan/tilt to the joystick again?
Reply

Re: Compu 06 Help

ebaclights ·
Its a lightronics RD-121 12x1.2 Ive been at the church today messing with it, and if I do anything for then 4-5 seconds, its really jerky, like its dimming in small steps instead of a smooth fade.
Reply

Re: Compu 06 Help

ebaclights ·
Its not the dimmer... I plugged in an Elation pack and tried it and its doing the same thing. If I do a fade time of 5 seconds or so, its there but its real hard to notice because its so fast. If I do anything above that, around 60 seconds, its real noticible. Its like . . . . . . . . . . . Any ideas?
Reply

Re: Help with buying the best controller

is-real ·
sorry to keep bugging, but i'm new on all of these... can i run multiple scenes at the same time, say, fixtures 1-4 doing something, while 5-10 something else? plus the 8 cans?
Reply

Re: Help with buying the best controller

Jingles8302 ·
on the operator u can run your scene and take over a fixture on the fly. and manually run your pars i believe. but about your earlier question about having fx1-4 do something while 5-10 do something else that u can achhieve but would have to program all within the same scene. understand? let me know if u have any more question. peace! jingles.
Reply

Re: Design 36 LED

pulighitng ·
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply

Re: Compatibility Issue solved.

pulighitng ·
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply

Re: Design 36 LED

serraava ·
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply

Re: Dmx basic positioning and termination

level10 ·
yup me l337 soldering skillz and a bunch of luck!! only had to re-make one or two ends in the whole club. god im glad to be done pulling cable tho!!! had to make a ton of 5-pin ends for octopods/rivas though. WHAT A PAIN!! (note to elation: MAKE OCTOPODS WITH STANDARD ENDS!!!!!!!)
Reply

Re: Playing Drums and Triggering Scenes - Can I Do It?

losjonz ·
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply

Re: Octopod 80 with Magic 260 profile?

elationpro ·
Hi Lemon, Yes.. right now, you can control each pod individually. if you use the 48 ch. mode. So each pod will be 6 channels each. So pack 1 will start at 001 pack 2 will start at 049 pack 3 will start at 097 Ch 1 is rainbow ch 2 red ch 3 green ch 4 blue ch 5 strobe ch 6 chase If you use ch 6 to engage a chase of which you have 8 chases. ch 1 becomes speed time, and ch2 becomes fade time.
Reply

Re: Magic 260 Issues

colorpalv10 ·
Lopez, Don't know how much field experiance you have had with elation lights but yes, we are referring to position correction. The little sensor that elation uses for all of its position correction... moving heads position correction, gobo homing, color homing, proton color wheel homing...fail from high humitity. Most elation users that are 5 or less miles from the ocean will be extremely effected. Especailly if there is no outdoor housing for the light. The salty air will destroy the sensor...
Reply

Re: Lighting Newbie

tylerherron ·
Welcome to the forums! For the dimmer packs, whatever address you set it to (129 for your example) tells you all the address for each light. light one will be 129 and light 2 will be 130, 4 - 131, 5 - 132. so just use the faders (channels 129 - 132) to turn on the par cans. Make Sense? For the ADJ Accu Spot 250 II's, I'm not entirely sure how to do what your thinking but what I would suggest is to set some scenes and just recall your scenes. Set the first light to the left of the runway and...
Reply

Re: Stage Pak 1 how to set up?

tylerherron ·
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply

Re: Wireless DMX problem

tylerherron ·
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply

Re: EasyShow

nickcarbone ·
we built little floor mounts for our led par196 lights, clamped one on the back of the bass amp for me (The drummer). we have 4 moving head mini wash lights that are also on the floor. there are 2 colorstrips on each guitar amp. It is a really easy setup, once our instruments and amps are in place we drop the lights and hook them up in less than 5 minutes. our next step i think is black lights.
Reply

Re: Compu live Dec. 21, 2007 version; movie record error

perfectmixsoundinc ·
Thx for the info. I have the compu club blue unit so I guess I am out of luck on this feature, WILL THE DEC 2007 VERSION FUNCTION ON MY COMPU CLUB BLUE I/0? the Oct 2006 version worked fine with it. also it seems like a bad decision to restrick recording unless your dongle is connected when you allow us to create without the dongle thus I don't bring it home which is where I do my configs, again I create files at home for client/venue and the interface stays at the venue.
Reply

Re: Riva 80

rain ·
Hey James - Yes, considering laptop or desktop computer for each Church this time around for ease of programming. Neither facility has ever used more than a light switch and a dimmer, so I hope by them NOT having experience, that the software is the easier route to go. The church in the pic above wants key light/features on the pulpit mainly. Then they want to be able to feature the orchestra pit (drums,bass,guitar - keyboard,piano - choir) Praise singers are just infront of the band. For...
Reply

Re: black lights

serraava ·
I apologize in advance for the very long and off topic post I am about to post. SCR dimmers work by chopping the sine wave of AC. This is how they 'dim'. AC is a wave. DC is a line. Now when power is created, is is created by a magnet spinning in a coil at 60 times per second, thus 60hz AC. This is how and why the wave is created. The little sine wave above, the start as 0 degrees, the first peak point as 90 degrees, the next mid point as 180 degrees, and the bottom peak point is 270 degrees...
Reply

Re: Demo Download?

rain ·
There was a list of MASTER and about 4 or 5 other fixtures below that. As I double clicked each one, a list of Custom, Elation, and a few others came up. In the Elation list I saw the DLED lights but not the Spot 250 or the Acclaim lights. Did see the RIVA80 lights though, which are similar to the X-eyeHD lights from acclaim.
Reply

Re: SS8 Question

serraava ·
Jingles is correct that it is in the impedance of the cables. DMX is 110 ohms standard. The protocol also calls for 5 pin cable, when it only uses 3 wires. It was made 5 pin originally for expansion, so you could have 2 pairs running down one cable, or for other data of some sort. DMX is dieing however, so it will never be expanded to use the extra pins. Also, for longer runs, Jingles is right that you should only use DMX. You can however start to see problems with mic cable vs DMX at any...
Reply

Re: Scene Setter 48 issues, less than 1 year

worldcreator ·
So what should be the typical lifespan of these SS48s? I'm actually looking for something that will last at least 5 years without any problems. Thats why I'm thinking I probably should just spend the extra money to get something more professional. Such as an NSI or Leprecon.
Reply

Re: Scene Setter 48 issues, less than 1 year

elationpro ·
Hi World.. Elation guy jumping in here. in the world of consoles in general the faders and buttons you commonly use will need to be replaced sometime or another.. sometimes sooner than later. With the Elation consoles we strive to use the good components to do the Job and not the best component made.. That is why you will see some lighting consoles for alot more money than the Elation product, and some consoles for less money. We believe our consoles are a great value for the price. However...
Reply

Re: dxm operator pro

serraava ·
32 max is pushing it. I generally start having problems with LEDs at 8 fixtures, depending on length of the run and fixtures in question. Dimmers, I daisy chain those things forever and they don't care, and I am talking racks upon racks upon racks. Movers, depends on the brand and length of cable in question. Some days it's 16, others it's 20, sometimes I can only get 6 on before the 7th starts acting up. If your last fixture in line is acting funny, and a terminator isn't helping, chances...
Reply

Re: What are some other uses for moving heads at weddings?

bdunard ·
The power distro that I built has 5 20 amp circuits and 4/4 cable. Maybe I could add one more circuit to it and get a hubbell connector. The problem is getting someone to tie it in. Do you have a link to the hubbell that you are using? Are you talking about a single hubbell connector that will take 4/4 copper? I would be very interested in seeing it as it would make a few thing easier for me.
Reply

Re: Newbie looking for help/advice

serraava ·
Yes, you have 96 pages that you can add to 8 different books in different ways for each book. The console doesn't say how many pages per book, so I assume you can use as many as you want. Don't quote me on it though. Sometimes you will see something like number of steps per show or chase. So if it says 40 Steps per Show, that would mean each of your books can have 40 pages in it, but you can make up 96 different pages to use in the case of the DMX Operator Pro. Don't think of CompuLive so...
Reply

Re: Wireless DMX problem

northernlights1 ·
I had an issue with the our Elation WDMX . We was doing a tent job and had 4 receivers in the air . We had issues getting all receivers to work . It intermittent and random . Sometimes it worked then it would not . We ended up running DMX cable . Back at the shop we determined the problem was specific to the Leprecon LP624 we had used . The WDMX worked fine with 2 NSI , 2 Lightronics , and 2 ETC boards . I love wireless ! I found some interference with HME wireless itercom on a Cigna gig .
Reply

Re: ADJ X-Move LED moving head...will there be an elation version soon?

ebaclights ·
I think Jon was correct when he said there are 20 1 watt leds on a circuit board. They do not make a single 20 watt led... If they did, ADJ would not be the first ones to have it. The highest wattage led ive seen was 5 watts.
Reply

Re: Newbe Question

chrisbozarth ·
Is there an easy way to make a Blackout seen to make all fixtures in the universe go to 0?
Reply

Re: DMX Programmer Question

djargyx ·
I think I've got it figured out now. I believe that Fade drops all active channels to 0 (EDIT: for black that is; Fade transitions to the next channel values otherwise). Unfortunately I just picked up some Chauvet Colorstrips and their RGB mixing requires channel 1 to be at 210-219 and then mixes RGB values on channels 2-4. EDIT: So, from black it has to fade through programs on channel 1 (I haven't tested, but I believe having black w/ channel 1 @ 210 might be ok for in between steps, still...
Reply

Re: Fading to black

ronr ·
I just tested a Magic-260 with a Design Spot-250 and was able to program a fade out. To program a fade out, set your dimmer to zero (0), add your desired fade time and save it to a desired page/button location.
Reply

Re: Fading to black

jaym ·
I was back it again this evening and tried several of the recommendations with no luck. ronr -- those where the exact steps I took. Even with my dimmer set to 0 and a fade time to 30 sec, it snaps to a black out. No slow fades. John -- could not find any snap or cross fade feature on the Magic 260 and nothing is mentioned in the documentation. Since we open the show this Friday. I have trained the operator to use the master fader. I'll keep looking for an automated solutions. Let me know if...
Reply

Re: more easyshow screwups

nickcarbone ·
i first had 5 songs in a row. about a month ago i added a 6th song to the end with scant errors every now and again. just recently i added a 7th song and now i'm noticing the crazy amounts of problems. again, it would be ideal for me to have everything in one file, because most of the songs interlude right into the next song... but i think to save myself the headache of problems that come along with it, im just gonna start programming single songs.. ugh!!
Reply

Re: design 108

serraava ·
Ok bdunard, here are the shots. Sorry it took a while to do, been really busy. First is white. The Opti 30 RGB on the left and DLED36 on the right. The target is about 5 feet away. As you can see, the DLED 36 is brighter, though not by much. The beam is also bigger, as would be expected in 25 degree angle vs 39 degree angle. Next is red. Then green. And lastly blue. One interesting thing I learned while doing this, the Opti 30 RGB is much better at matching the gel colors in the gel selector...
Reply

Re: design 108

serraava ·
Yes it does. I am still wondering if they are going to make different plates for them like Coemar has for their ParLite LED series, which is the direct comparison to Elation's DLED36. I have actually found that musicians love the LEDs over conventionals do to the lack of heat. They also love that I can get 'high' powered lights into a space with little to no power and not have to worry about tripping breakers. The nice part when someone thinks something is too bright, dim it. And then when...
Reply

Re: Pan Limit on DS250

matchless1 ·
Man, I hate it when I spend the time to type out a long post, then turn around and figure out the answer to my own question!! Anyway, instead of deleting the question, I figured I would post the answer in case anyone else had the same problem: It seems that my INIT scene in my Design Spot 250 PAGE had all the pan channels set to 85...go figure! So, of course I just set them to 0, saved, and now I'm rockin' and rollin' again. I guess sometimes you just have to ask the question to trigger the...
 
×
×
×
×