Tagged With "Firmware V1.21"
Reply
Re: EasyShow
IBM Thinkpad 2.4Ghz CPU 1GB Ram 40gb HD barely used Video Card is onboard and probably crappy Windows XP 2005-ish 12-21-07 CompuLive The show ran great yesterday as well, playing through 3 different shows changing tracks no problem with no glitch or skip... just that one time it happened worries me.
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Okay, I think this is a bug. (cycles)
if this is still the march 21 edition then you have two choices. I can email you the link to the jan version that was said to run fine or you can visit our downloads page and download the beta version of I believe it is the July 21st update. Seems there were some bugs in the march update. Sorry to have you do so much but let me know what you wanna do. Sincerely,
Reply
Re: Scene Fade Suddenly Not Working
Just sent the file to Jingles' email. I mentioned this in the email, but I'm noticing now that even when I don't SAVE the stage, and just close out the stage, it increases the file size. For example, I just closed my Deluxe stage, which WAS 2.5 MB. Then I re-opened the 3D viewer, and the file is now 10.1MB. This was never a problem before the Mar 21 2008 update. I'm beginning to wonder if I should go back to the previous version. Is anyone else having this same problem?
Reply
Re: Scene steps
James, Thanks for checking into this. One clarification from your post "multiple pages with the same fixture in use". I am not exactly sure what this means. In my .ssh file, each page reflects a unique par can. Each page controls separate and distinct DMX channels from all other pages. No par can is governed by two pages, excepting the master page. Interestingly, I deleted the offending page "White Stage" DMX channels 10-21 and recreated it. This did not solve the mysterious problem. I...
Reply
Re: HZ-300 concerns
What a foggin' show. The producer's fogger(non Elation, and an el-cheaper piece of crap) died. Well, maybe. t would be fine, then afte r a while it would give a gigantic blast of fog until either it woudl duty cycle or I power it off. Unreliable, didn't use it. Couldn't use it. My HZ-300 would work using the remote, so chances are it's an issue in regards to DMX inside the unit. I used a new flame bowl effect AFTER the HZ-300 on a power pack, and it worked fine except at the end when the...
Reply
Re: copying switch
ok i got the first part but for some reason it isnt finding my 2 power packs that are running my 8 can lights on channel 21
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems
Actualy in Germany is 0:05 and the TMH-10-Fixture is working since 21:00 in Discothec-Work - and no Crash - while putting my fingers away from the Strobe- and Shutter-Function
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: compu ware 04 (club)...?
So... if I end up using a PC, I need to download the above file (December 21, 2007)? Is there a new fixture library that would better than the stock fixtures profiles that came with that particular 2007 version? I am trying to get the following to play nice: 4 High End Trackspot 4 Martin 518 pro 4 American DJ Par64 LED 2 Martin Atomic 1 Martin Wizard Thanks again.
Reply
Re: Introduction and basic questions
Chris is, of course, correct that software has many advantages over hardward controllers. They have a few disadvantages too. For big shows the advantages of software usually overwhelm its disadvantages. Hardware controllers have a different set of advantages and disadvantages. Depending on your situation, deciding between hardware and software is not easy. While I hate that I can't use a computer to set up my scenes and shows (easier set up and 3D visualization), I've stuck with a hardware...
Reply
Re: Design Spot 575e Dimmer Speed
According to the manuals I have, channel 21 just controls CMY speed. If you want to control dimmer speed, simply program a fade with the time you want using the dimmer channel.
Reply
Re: how to install a fixture an dmx code the light
Ronald I removed the link in your signature as we do not allow any links on our forums too 3rd party websites or web stores. Sorry. Satxnate, you need to set each led pro to a DMX starting address. the fixtures uses either 6 or 7 channel I can't remember exactly. but by setting a starting address you are telling the par can which DMX channel to "listen" too from the DMX controller. And when you manipulate the correct channels the light will react according to the DMX traits programmed into...
Reply
Re: 42 lights, dip switches using elation and american dj p26 led
not sure who told you to set them all to 1, because this is wrong. The program will not address the lights for you, you need to manualy address the fixtures. So, for example, in the first box say they are all in RGB mode, you would set the first pair to both be "1" then set the next pair to be channel "4" then the next pair to be "7" so on and so forth...then, in Compu, once all of the address are set, you would load the profile for what ever profile light you have and patch how ever many...
Reply
Re: Need help on set-up
EZ Kling User Manual Pages 21 through 23 of the user manual show some configurations of how to run a EZ Kling. I would also make sure your IP addresses of your devices are set correctly. If using Artnet, make sure all your device IP addresses start with 2.x.x.x
Topic
ZCL360i Fixture Firmware
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Rayzor 360Z Fixture Firmware
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
eNode 4 pre-sales support questions
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic
ACL360i Firmware V1.1.3
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
WW Profile HP Fixture Firmware
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
CW Profile HP Fixture Firmware
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Fixture Profile for American DJ Focus Spot 3 moving light
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic
Scene setter 24 with 4 LED par
I'm trying to setup my 4 LED par, assigning an address of 1 to 5 for the first par(address 1), 6 to 11 for the second par(address 6), 12 to 16 for the third par(address 12) and 17 to 21 for the fourth par (address 17). My problem is all the first 3 par is working will with the faders, except the last par (4th par) is not responding anything from the faders. Hope someone can help here..Thanks!
Topic
Satura Spot LED Pro Profile
I am having issues finding the correct profile within CompuShow yet again, this time with the Satura Spot LED Pro. I have downloaded the updated profiles online from Dropbox, however, they still seem to be missing something. There are 22, 24 and 32 channel modes for this fixture and the two versions online seem to only contain 20, 22, and 26 or a 19, 21, and 25 channel modes. Could I get an updated profile on this fixture please? Thanks in advance!
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
mini wash chinese
Hi I have a few Chinese made Mini Wash's that I need a profile for they are 8 and 13 channel. 1. pan 2. pan fine 3. tilt 4. tilt fine 5 pan/tilt speed 6. dimmer and strobe 0-7 blank 8-134 dimmer 135-239 strobe from 0hz to 40hz 240-255 open 7. red 8. green 9. blue 10 white 11.color 0-7 blank 8-21 white 22-34 red 35-49 dark green 50-63 dark blue 64-77 light blue 78-91 magenta 92-105 yellow 11. 106-119 purple 120-134 orange 135-147 light green 148-161 pink 162-175 brown 176-189 gold 190-203...
Topic
Rayzor Q7 & Q12 Zoom Fixture Firmware.
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic
Satura Series Fixture Firmware
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic
Need Help - Scene Setter 48
Hello All, I really need any expert advice, so please chime in no matter how remote the solution might seem. I'm a relatively newbie and am caring for a SS48 in our youth group sanctuary. We have 4 dimmer packs (for conventional lights) and multiple ColorKey LED Par 64 cans. To give you some reference. This is a our setup: Channels Controls 1-4 Set of 6 LED PAR cans (Channel 1) 5-8 DimPak: 8 conventional cans (2/Ch) 9-12 DimPak: 8 conventional cans (2/Ch) 13-16 DimPak: 8 conventional cans...
Topic
Okay, I think this is a bug. (cycles)
When I create a new Cycle in Compulive, and goto button > settings, and select Scene in "Type" Compulive crashes every time. Also when I try to add a new cycle on the master page, and then edit I do not get any buttons at the top of the cycle page...??? I am running Compu live March 21 2008 on a 2048fc+
Topic
Compu Live Not Responding
I purchased Compu 1024EC and installed Compu Live (03-21-2008) on a Compaq Laptop running Vista Home Premium (32 bit). On My first attempt, I installed the demo pages and started in beginner mode as the manual suggests. When I attempted to add my own Elation Cyber Pak Dimmer the software stopped responding. I was following the instructions for adding your own fixtures using the scan library. The fixture test in step 3 worked and I got through to the last step. When I clicked on the Finish...
Topic
Compu live Dec. 21, 2007 version; movie record error
Compu live Dec. 21, 2007 version; getting an error on movie recorder "warning not available in limited mode" when in "USER MODE". I onle see limited mode in "construction view" so why the error in user mode, is this a bug?
Topic
Trackspot profiles
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic
Combining Scenes in the Scene Setter 24
Hello! I'm new to lighting and only learning it in a volunteer capacity but I looked through the manual and couldn't find a way to do this so I thought I'd try here: Our setup in case it matters: We have a Scene Setter 24. We have white can lights on 4 dimmer packs (9 cans, channels 1-9) and some DMX lights (right now 4 DMX lights taking 4 channels, 2 on 15-18 and 2 on 19-22. This will soon be replaced by all 4 of those being on channels 21-24 and new lighting that takes 7 channels being on...
Topic
HZ-300 concerns
Uh oh. Seems a problem has to occur at every show. This time it's with my HZ-300. Usually it's with my non ADJ or Elation fixtures. HZ-300, moved without the box from the venue on February 28, 2010 because the truck broke down and could not drive anymore. Truck gone for 2 months. Anyhow, device sat unused with a darn near full tank of water-based hazer fluid(Antari brand and recommended fluid). Fired it up today, May 21, 2010, and all I really see is the DMX LED flashing 3 times, takes a...
Topic
Design Brick 70 II
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic
Crashing
Hey all - Like the package a lot. However, as I have been playing around trying different things I have gotten several incidents of crashing. I will post them here as they occur. I am on Mac 10.6.5 using Emulation V. 1.03.15. I don't know how much you need so I just copied like half of it and if I should do less just let me know. Process: Emulation [5314] Path: /Applications/Emulation.app/Contents/MacOS/Emulation Identifier: com.VisualProductions.Emulation Version: Emulation version 1.03.15...
Topic
Eurolite THM-4
Hi, I need a Fixture-file for my "Eurolite TMH-4" Moving Heads. DMX-Protocol: CH1: Pan (8Bit) CH2: Tilt (8Bit) CH3: Pan/Tilt Speed 0-100% Decreasing speed CH4: RED CH5: Green CH6: Blue CH7: Colour Macros - 0-40 Neutral - 41-80 Macro 1 - 81-120 Macro 2 - 121-140 Macro 3 - 141-160 Macro 4 - 161-200 Macro 5 - 201-240 Macro 6 - 241-255 Neutral CH8: Switching LEDs, Strobe, Reset - 0-10 LED off - 11-20 LED on - 21-30 Reset - 31-200 Strobe effect with increasing speed - 201-250 Random strobe effect...
Topic
Compulive with Scene Setter 24
Hi All, I was wondering if it is possible to use the Compulive software with a Scene Setter 24? I want to program all of my scenes using the Compulive and then use the Scene Setter for fade times between each scene. I am using 6 Elation Design Spot 250s, 21 American DJ Mega Bar LEDs, 4 American DJ Mega Strobes, and an Antari Fazer. So I would do all my programing on Compulive and then simply want to set the scenes to faders on the scene setter. If possible I would like to have manual control...
Topic
James Thomas Profile
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Topic
DMX 192 controller question
Hello All, I am assisting my church in a lighting upgrade they are currently undertaking. I have been a lighting designer for the past 25 years having used mainly ETC consoles with an occasional Strand desk thrown in to make me crazy! We have approximately 20 Elation LED fixtures and a DMX 192 controller. I essentially have 4 groups of fixtures and each group will be assigned the same DMX address so each group will operate together. I have them all patched together using 3pin DMX cable with...
Topic
Fixtures with wrong addresses
Hi, We've recently purchased an Elation DMX Operator. It's pretty much bottom line this one without the polarity switch on the back. It's controlling 10 HTL LED par64 pro cans. We've been trying to put each par on it's own fixture. Following the manual for the board, we set each light's address to intervals of 16 (1, 17, 33, and so on). To our surprise this did not work at all. We then attempted separating them by 6 since we're using only the first 6 sliders for each light (intensity, r, g,...
Topic
Design Spot 250 Reverse Display
We have two Design Spot 250 Pros and just got them mounted upside down on new truss last week. While I was up on a lift adjusting the parameters I couldn't find the Reverse Display setting mentioned in the Features section of the User Guide but not listed in the table in the "8. Fixture Menu" section (pgs 21-23). The following sub-sections don't mention anything about reversing the display that I can find. Of course, I must be partially blind. It's probably right there. I also searched the...
Topic
Profile needed Yellow River YR-668Bii
These lights are from china and ill be using them on a very important tour but i won't get to program with them til the day of the show (Sept 21). Could you please help me? here is a link to the website but i haven't been able to find detailed channel info. http://www.yrlight.com/sdp/367...d_light_YR-668B.html Thank you ! Lucas
Topic
help please
Posted 11 November 2010 06:21 PM where can i find an I.E.C. Plug so i can daisey chain my power cords off of another light?
Reply
Re: help!! easyshow/laptop crash
Lol. I'll give you a hint on my aim screen name jingles, you have seen it before. Problem is, you can see and/or talk to me unless your on my buddy list. 21 here. I have been doing lighting professionally since sophomore year in high school, so about 5 years now. Started the 'big gigs' when I graduated in '05. One thing I have going for me is I look and act like a 30 year old, so no one questions me unless they find out my age.