Eurolite THM-4

gz-ligtingMember

Hi,
I need a Fixture-file for my "Eurolite TMH-4" Moving Heads.

DMX-Protocol:
CH1: Pan (8Bit)
CH2: Tilt (8Bit)
CH3: Pan/Tilt Speed 0-100% Decreasing speed
CH4: RED
CH5: Green
CH6: Blue
CH7: Colour Macros
- 0-40 Neutral
- 41-80 Macro 1
- 81-120 Macro 2
- 121-140 Macro 3
- 141-160 Macro 4
- 161-200 Macro 5
- 201-240 Macro 6
- 241-255 Neutral
CH8: Switching LEDs, Strobe, Reset
- 0-10 LED off
- 11-20 LED on
- 21-30 Reset
- 31-200 Strobe effect with increasing speed
- 201-250 Random strobe effect with increasing speed
- 251-255 LED on
CH9: Dimmer intensity
CH10: Pan (16Bit)
CH11: Tilt (16Bit)

Thanks!

7/13/122:35 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Ok, for what program or console do you need this for? We need all details of your request when you first post please. This is the Elation fixtures section. So, once you tell us what kind of profile you need I will then move this post to the correct thread.
Sincerely,

7/13/1210:05 AM

❤️ 0

gz-ligtingMember

quote:
Originally posted by jingles:
Ok, for what program or console do you need this for? We need all details of your request when you first post please. This is the Elation fixtures section. So, once you tell us what kind of profile you need I will then move this post to the correct thread.
Sincerely,

I'm using the elation "emulation" software connected with a midicon do you need to know something else?

7/17/121:27 AM

❤️ 0

gz-ligtingMember

quote:
Originally posted by jingles:
Ok, for what program or console do you need this for? We need all details of your request when you first post please. This is the Elation fixtures section. So, once you tell us what kind of profile you need I will then move this post to the correct thread.
Sincerely,

I got another question:
There is an "ebuilder" on the emulation CD. With this it's pretty easy to create a fixture file by myself. but how can I transfer it to the emulation software?
THX!

7/17/121:29 AM

❤️ 0

JWPardee (Guest)

if you build a new profile, you save the file. You will locate it on your C drive...in "my documents"...Elation...Common..Personalities...User as long as the new file is in "User" you should be able to load it when you open up Emulation Remember what you save the file as, if it is not in user, find the file and put it into User then Open the program and it should be there

7/17/123:39 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...