Compulive with Scene Setter 24

nichMember

Hi All,

I was wondering if it is possible to use the Compulive software with a Scene Setter 24? I want to program all of my scenes using the Compulive and then use the Scene Setter for fade times between each scene. I am using 6 Elation Design Spot 250s, 21 American DJ Mega Bar LEDs, 4 American DJ Mega Strobes, and an Antari Fazer. So I would do all my programing on Compulive and then simply want to set the scenes to faders on the scene setter. If possible I would like to have manual control of the fixtures too, but that would be a luxury at this point.

Thanks for the help!

1/19/1112:59 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

i know you an use DMX input. but I'm unsure about using it to trigger scenes in the software. So give me a day to check this out and I will for sure let you know ASAP tomorrow. Sound Good.
Welcome to the forums.
Sincerely,

1/19/111:15 PM

❤️ 0

nichMember

Awesome thanks for checking. To be clear the ideal situation would have me using a grandMA or road hog. And essentially that is what I'm trying to do with the scene setter.

Thanks.

1/19/111:37 PM

❤️ 0

nichMember

Hey James,

I was wondering if you had heard anything as to whether using that Scene Setter in the way I wanted would work. Let me know when you get a free moment.

Thanks for everything!
nich

1/24/1111:45 AM

❤️ 0

Jingles8302Admin

I found out that yes it is possible. You can set up scenes and switches to be triggered by the DMX input. Still working on exactly how. But I know will get a answer to that soon.
Which model interface do you have?
Sorry for the delay.
Sincerely,

1/24/1111:54 AM

❤️ 0

Jingles8302Admin

I found out the kicker. You have to assign a scene to a channel and when you move that channel fader it will play that scene. but since you only have a SS24 you limited I think to only 24 scenes being triggered with that unit as DMX input. not sure if you can "stack" triggers or have multiple scenes trigger by the same channel fader.
Sincerely,

1/24/111:11 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...