Tagged With "Colour 5 Profile Firmware V1.0.15"
Reply
Re: scene setter 24 dmx channel addressing
Hey Carl, To assign the DMX Channels on "ADJ" branded version of the Scene Setter you will need to do the following: 1. Enter Program Mode by pressing and holding the Record button and entering 1, 6, 6, 8. 2. Enter Channel Assign Mode by pressing and holding the Record button and entering 8, 8, 8. 3. Once this has been done the display will read 001, you can now use the Up or Down button to select the channel (1-512) that you want assigned. 4. Once your desired channel is displayed, tap the...
Reply
Re: E-Builder
Hi! No worries! I actually kept a Dropbox folder of ALL Emulation and E-builder releases i got and that we saved, here is the E-builder folder I have: https://www.dropbox.com/sh/8tg...hO3bOKXx61va_2a?dl=0
Reply
Re: Compu Pro 06?
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply
Re: spot and wash 250
do u have any control over the one that is moving on it's own? is there any type of light that tells u it is recieving a DMX signal? also i just checked and if u have the power spot and washes the spots are 15 channels which would mean the second one should start at A016. and if this is so is it panning and tilting on it own or just one or the other. can u tell me what u have and at what addresses?? i need to know if they are power spots and washes or what. and also if the washes are cmy or not.
Reply
Re: Compu Pro 06?
I am not using any lights yet, just the viewer. I am only working with conventional fixtures on the program right now, so there is no home position. The lights fade out fine when I make a "fade out" button, but changing between scenes is what I cant get to work. Basically Say if I fade up fixtures 1-5 on my first scene, but on my second I want fixtures 6-10 to fade in, but 1-5 to fade out.
Reply
Re: Compu Pro 06?
I have 5seconds in the first fade box(fades in just fine) and I have 5 seconds in the last fade box (does not fade out)
Reply
Re: Compu Pro 06?
try putting the last 5 sec. in either the first or second RED boxes. and i will do the same and let u know what works for me!
Reply
Re: Compu Pro 06?
ok i got it! what u want to do is put a 5 sec fade time in the second blue time box. the one with the solid blue line going up and then u want to put the last time (fade down) in the last red time box. the one with the solid RED line going DOWN! ok? try that and let me know!
Reply
Re: Help w/ DMX addys
The first pack should have only the first dip switch up and the second should have only the first and third up. This will make the channel 1 for the first and 5 for the second, thus covering all 8 channels you want. No, you can't separate the two plugs so you get 8 channels out of each pack, its strictly 4 channels. However, yes you can add more packs and "piggy back" or "daisy chain" (which ever term you prefer) off of the DMX outs from the last dimmer pack. You should already be doing this...
Reply
Re: need to know???
hey guys im doin it now but i find cause i have three reds in this fixture i think i does not sem to want to let me use 3 of em just two! also am i to click on the channels and enter in the numbers and signs for the channels patched to several diffeent outputs?? so for example that says 1= 0+1/40/60 and i enter in that in the box?? am i doin this right??? help me!! peace! jingles out!
Reply
Re: Opto Branch
TAP is correct. However you should have both 3 and 5 pin outputs. If you get a 3 to 5 pin turn around you can actually use all 8 outputs making it an OPTO BRANCH 8. works great.
Reply
Re: Is there a place where I could. . .
ok cool thats just one more thing i need to save up for. arg this is getting expensive for a 15 year-old teenager. jthtiger
Reply
Re: Compu Live Questions
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply
Re: Compu Live Questions
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply
Re: Compu Live Questions
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply
Re: Compu Live Questions
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply
Re: DMX Operator 192
Oh ok makes sense now. Now this is a new question, I have 5 lights right. So lets say I hook up all 5 lights one way at one event. I assign the pan/tilt channels to the joystick. Now if I move the setup around, and the units are running under different #'s, do I have to re-assign the pan/tilt to the joystick again?
Reply
Re: Compu 06 Help
Its a lightronics RD-121 12x1.2 Ive been at the church today messing with it, and if I do anything for then 4-5 seconds, its really jerky, like its dimming in small steps instead of a smooth fade.
Reply
Re: Compu 06 Help
Its not the dimmer... I plugged in an Elation pack and tried it and its doing the same thing. If I do a fade time of 5 seconds or so, its there but its real hard to notice because its so fast. If I do anything above that, around 60 seconds, its real noticible. Its like . . . . . . . . . . . Any ideas?
Reply
Re: compu 2006
Hey Guys, last night i had a show and the compu program ran good! It gave me that shutdown message one time the entire night (3hrs) but im stiil having a problem with one fixture (spot).When i click center so that all the lights can face up, that one fixture faces the front (sound guy)I've tried the RPAN and RTILT and it stays the same.Last night i also ran into a prob. with another spot. I was getting a RSER message from it.I wasnt able to use this fixture last night.Another thing towards...
Reply
Re: Is there a place where I could. . .
You should check to see if they have student pricing with their software. Some companies have educational versions that are fully functional.
Reply
Re: Help with buying the best controller
sorry to keep bugging, but i'm new on all of these... can i run multiple scenes at the same time, say, fixtures 1-4 doing something, while 5-10 something else? plus the 8 cans?
Reply
Re: Help with buying the best controller
on the operator u can run your scene and take over a fixture on the fly. and manually run your pars i believe. but about your earlier question about having fx1-4 do something while 5-10 do something else that u can achhieve but would have to program all within the same scene. understand? let me know if u have any more question. peace! jingles.
Reply
Re: Design 36 LED
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply
Re: Compatibility Issue solved.
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply
Re: Design 36 LED
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply
Re: I Can't Decide!!!!
Hi Choirboy, 2400Watts is exactly 20 amps. the DP-DMX20L can only handle 15 amps or if you change the power cord to a 12gauge cord, then it can do the full 20 amps. I would recommend the following. CYBER PACK - 20 AMPS 2400WATTS ETL APROVED DP-640B - 40 AMPS 4800 WATTS UL APROVED. Best regards,
Reply
Re: Dmx basic positioning and termination
yup me l337 soldering skillz and a bunch of luck!! only had to re-make one or two ends in the whole club. god im glad to be done pulling cable tho!!! had to make a ton of 5-pin ends for octopods/rivas though. WHAT A PAIN!! (note to elation: MAKE OCTOPODS WITH STANDARD ENDS!!!!!!!)
Reply
Re: Playing Drums and Triggering Scenes - Can I Do It?
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply
Re: Octopod 80 with Magic 260 profile?
Hi Lemon, Yes.. right now, you can control each pod individually. if you use the 48 ch. mode. So each pod will be 6 channels each. So pack 1 will start at 001 pack 2 will start at 049 pack 3 will start at 097 Ch 1 is rainbow ch 2 red ch 3 green ch 4 blue ch 5 strobe ch 6 chase If you use ch 6 to engage a chase of which you have 8 chases. ch 1 becomes speed time, and ch2 becomes fade time.
Reply
Re: Hey Guys!!! I'm Back . . . again
Hey John, James told me to tell about this. It is a quick story that I experience on tour. Our lighting guy is 16 (yes they put a 15 and 16 year old in charge of all that equipment, scary huh?) He really isn't a lighting guy he just knows how to run the software. He really just wants to play in a band. Anyways for awhile I have been learning from him, but now it is different. Since I've been on these forums as well as the ADJ forums I have learned ALOT. Well at one of our shows we had the...
Reply
Re: Magic 260 Issues
Lopez, Don't know how much field experiance you have had with elation lights but yes, we are referring to position correction. The little sensor that elation uses for all of its position correction... moving heads position correction, gobo homing, color homing, proton color wheel homing...fail from high humitity. Most elation users that are 5 or less miles from the ocean will be extremely effected. Especailly if there is no outdoor housing for the light. The salty air will destroy the sensor...
Reply
Re: Lighting Newbie
Welcome to the forums! For the dimmer packs, whatever address you set it to (129 for your example) tells you all the address for each light. light one will be 129 and light 2 will be 130, 4 - 131, 5 - 132. so just use the faders (channels 129 - 132) to turn on the par cans. Make Sense? For the ADJ Accu Spot 250 II's, I'm not entirely sure how to do what your thinking but what I would suggest is to set some scenes and just recall your scenes. Set the first light to the left of the runway and...
Reply
Re: Show Designer 3 manual question
I have the printed manual that came with it, every page of it has at LEAST 10-15 missing characters, it's very frustrating. Mostly 'r' 'p' 'w' 'y' and 'n' I figured out my problem, settings were carrying over into other presets, but I figured it out
Reply
Re: Design 36 LED
I guess that is what i was waiting for it is a shame that 7 of the 8 programs are bad and that is that. I will be ordering the next twenty units sometime this week only i will be going with the Colorado1 from chauvet. I have ten of this units and the feature sets and service are way better and the price is $100+ better then the design 36. I am also starting to have problems with my design 60 units and will be shoping for another brand to complete my need for 15 more units.
Reply
Re: Stage Pak 1 how to set up?
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply
Re: Stage Pak 1 how to set up?
on a side note. your spot 250 uses 6 DMX channel and the vue 3 uses 9. 9+6=15 DMX channels total. so you only have room for maybe one or two pars on the stage setter 8. might want to look into a bigger controller. like jthtigers DMX operator 192.
Reply
Re: Wireless DMX problem
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply
Re: EasyShow
we built little floor mounts for our led par196 lights, clamped one on the back of the bass amp for me (The drummer). we have 4 moving head mini wash lights that are also on the floor. there are 2 colorstrips on each guitar amp. It is a really easy setup, once our instruments and amps are in place we drop the lights and hook them up in less than 5 minutes. our next step i think is black lights.
Reply
Re: Compu live Dec. 21, 2007 version; movie record error
Thx for the info. I have the compu club blue unit so I guess I am out of luck on this feature, WILL THE DEC 2007 VERSION FUNCTION ON MY COMPU CLUB BLUE I/0? the Oct 2006 version worked fine with it. also it seems like a bad decision to restrick recording unless your dongle is connected when you allow us to create without the dongle thus I don't bring it home which is where I do my configs, again I create files at home for client/venue and the interface stays at the venue.
Reply
Re: Riva 80
Hey James - Yes, considering laptop or desktop computer for each Church this time around for ease of programming. Neither facility has ever used more than a light switch and a dimmer, so I hope by them NOT having experience, that the software is the easier route to go. The church in the pic above wants key light/features on the pulpit mainly. Then they want to be able to feature the orchestra pit (drums,bass,guitar - keyboard,piano - choir) Praise singers are just infront of the band. For...
Reply
Re: black lights
I apologize in advance for the very long and off topic post I am about to post. SCR dimmers work by chopping the sine wave of AC. This is how they 'dim'. AC is a wave. DC is a line. Now when power is created, is is created by a magnet spinning in a coil at 60 times per second, thus 60hz AC. This is how and why the wave is created. The little sine wave above, the start as 0 degrees, the first peak point as 90 degrees, the next mid point as 180 degrees, and the bottom peak point is 270 degrees...
Reply
Re: black lights
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply
Re: Demo Download?
There was a list of MASTER and about 4 or 5 other fixtures below that. As I double clicked each one, a list of Custom, Elation, and a few others came up. In the Elation list I saw the DLED lights but not the Spot 250 or the Acclaim lights. Did see the RIVA80 lights though, which are similar to the X-eyeHD lights from acclaim.
Reply
Re: Design 36 LED
Hi PU.. Believe me, I am also glad our R&D department jumped on it. I just wished they would have told me, instead of telling me they couldn't. We will have lens kits for them as well, but it looks like a 15 and 45 degree kit. I know they are working on an 8 or 12 degree lens kit, but nothing yet. FYI.. Price on the DLED 36 went down a few dollars so you'll be able to get a better price, and we are introducing the DLED 108IP, which is a DLED 36 with K2 Leds, and IP65 rated. Send me an...
Reply
Re: SS8 Question
Jingles is correct that it is in the impedance of the cables. DMX is 110 ohms standard. The protocol also calls for 5 pin cable, when it only uses 3 wires. It was made 5 pin originally for expansion, so you could have 2 pairs running down one cable, or for other data of some sort. DMX is dieing however, so it will never be expanded to use the extra pins. Also, for longer runs, Jingles is right that you should only use DMX. You can however start to see problems with mic cable vs DMX at any...
Reply
Re: Scene Setter 48 issues, less than 1 year
So what should be the typical lifespan of these SS48s? I'm actually looking for something that will last at least 5 years without any problems. Thats why I'm thinking I probably should just spend the extra money to get something more professional. Such as an NSI or Leprecon.
Reply
Re: Scene Setter 48 issues, less than 1 year
Hi World.. Elation guy jumping in here. in the world of consoles in general the faders and buttons you commonly use will need to be replaced sometime or another.. sometimes sooner than later. With the Elation consoles we strive to use the good components to do the Job and not the best component made.. That is why you will see some lighting consoles for alot more money than the Elation product, and some consoles for less money. We believe our consoles are a great value for the price. However...
Reply
Re: dxm operator pro
32 max is pushing it. I generally start having problems with LEDs at 8 fixtures, depending on length of the run and fixtures in question. Dimmers, I daisy chain those things forever and they don't care, and I am talking racks upon racks upon racks. Movers, depends on the brand and length of cable in question. Some days it's 16, others it's 20, sometimes I can only get 6 on before the 7th starts acting up. If your last fixture in line is acting funny, and a terminator isn't helping, chances...
Reply
Re: What are some other uses for moving heads at weddings?
The power distro that I built has 5 20 amp circuits and 4/4 cable. Maybe I could add one more circuit to it and get a hubbell connector. The problem is getting someone to tie it in. Do you have a link to the hubbell that you are using? Are you talking about a single hubbell connector that will take 4/4 copper? I would be very interested in seeing it as it would make a few thing easier for me.