Tagged With "Siudi Driver"
Reply
Re: Compu Pro 06
The program should not be crashing, we have used the new version for days on end without hiccups, let alone a crash. The latest update is Oct 16, also make sure you are using the suidi5 driver, as it is designed for the newer interfaces. Conflicts in PC's are very common, if your problems persist, send me detailed info about your system and I will look into it. Oct 16 version and new drivers
Reply
Re: Need help w/ DMX Operator
Sounds like you may have had a power surge that may have damaged your DMX driver chips. It could be the lights only or the controller only or both. Do you have another DMX controller to test?
Reply
Re: Need help w/ DMX Operator
I know nothing about circuitboards & parts but damaged DMX driver chips sounds really bad. If it was the chips, how bad is it? Would I be better off sending it in to have it serviced or should I just buy a new controller? I didn't even think of checking the lights themselves to make sure nothing had happened to them. I'll set the lights to auto/sound mode & see if they're ok. Looks like I'll have to look into better surge protection and borrow a friends controller to make sure the...
Reply
Re: Need help w/ DMX Operator
Hi DJ, Yes it could be bad. If the DMX driver chips are damaged, then they will still work sound active. Try using your friends board and a light also to see if both your lights and controllers work. If it is DMX drivers, then you will have to send it in for service. No other way around it. Elation makes this device. DMX Branch 4. It is created to supress over voltage to the DMX signal. Once overvoltage goes through the line it takes everything out. However most people don't sell this or...
Reply
Re: Vision scan 250
I believe the front cover of the light is held by 4 screws. These are special 1/4 turn screws that allow the light to easily be opened for service or gobo change out and maintanence. Just get your self a philips head screw driver.
Reply
Re: compu 2006
is the one power spot in a different position or orientation then he rest that would make the center buton different? like where is it mounted? no if u mess with center it just changed the setting in the center button it shouldn;t effect other buttons unless they ae included in the scene. like i said after you create ur fixture page and thern mess with center just fix the one that you are having problems with. also here is what the manulasays for RSER "RSER This message informs you that one...
Reply
Re: RSER message
Hi Evolution. RSER This message informs you that one of the fixture function wasn’t able to do its reset correct (magnetic sensor, stepping motor, driver on the PCB, cables, etc.). Repair the defect and start the fixture again. When a fixture starts up, it goes through a calibration process to make sure all system are good. It tests every motor to make sure it works. So the light has a color wheel motor, gobo wheel motor, shutter/dimmer motor, pan motor, tilt motor etc. etc. One of these...
Reply
Re: dxm operator pro
actually jthtiger we tell all of our sales guys to spec. in a DMX opto branch for almost every rig they sell. why? cause it is always best to have your lights electronially isolated. say there is a big thunderstorm that hits and lighting strikes the building im willing to bet you that one of the first things to fry out would be the DMX driver chips in the lights cause they were not isolated. think of it as a surge protector for DMX. snakeman welcome i agree with what jthtiger said i was just...
Reply
Re: Compu software to a different DMX/USB interface
That is not possible as each one depends on a driver or information from the other to control the lights. Sincerely,
Reply
Re: Okay, I think this is a bug. (cycles)
Hi Jingles, I will try to re-install this evening, and see what happens, I run 2 monitors on my laptop, so I am also going to update the video driver too! Almost looks like a video problem how it shows up sometimes. And yes that’s my rig!
Reply
Re: Okay, I think this is a bug. (cycles)
Okay, I still no resolution to the “missing” buttons on a cycle page, I have updated the bios, updated my video card driver, and also re-installed Compulive on my system (new laptop). When I first open the window there are no buttons…, but if I resize the windows the buttons will show up,, temporally... If I click a scene or button other than the active window, this is what I get (see link for picture). Cycle screen shot Now, I have another weird issue, and cannot find any documentation of...
Reply
Re: Compulive works, but no output from Dongle, Please help!
You know, I looked all over the place in the new user manual and could not find a disclosure. Past user manuals had this, and It should be in the current user manual. Please read carefully the following preventive measures carefully: 1. Place a DMX insulator between interface and DMX fixtures (e.g. DMX branch 4, Opto Branch 4) in order to protect them both from any interference and from overvoltage. 2. We advise you to have an available spare RS485 driver IC. This is an 8 pin electronic IC...
Reply
Re: Newbie Question
Hola Petter, Our Elar fixtures are either 24 volts. You can use any power supply that will give you 24 volts. what you need to be sure of is the wattage. This varies on the qty of fixtures you will use. The ELAR DRIVER 3 is not available. we have the ELAR DRIVER 1. The ELAR DRIVER 1 give you 3 channels of DMX. So you can connect all 6 ELAR 4z04 to 1 ELAR DRIVER 1 and they will all change together. Or if you want to control each one seperatly, you will need 6 ELAR DRIVER 1. The ELAR DRIVER 8...
Reply
Re: Newbie Question
Hi again and thanks for the response. I will propose to use the "ELAR-DRIVER-8" for the project, but I have another question about the programming and control. I read that "ELAR-DRIVER-8" has compatibility with DMX 512. With this "ELAR-DRIVER-8", do I need to buy a DMX Operator or some Control Panel to do the programming and the change of color? or I have to use some kind of software to program this device and put on "Stand Alone Mode"? I will be waiting for your quick answer, thanks a lot...
Reply
Re: COMPULIVE: Quirks or bugs, and some recommended Enhancements.
Misbeam wassup? you know i dont even get bug fixes updates for these things. ill ask tomm and post my findings. as far as i know from my personal findings it seems there is an updated driver. so if your driver date was 10/17 it should now be 5/30. i will do my best to confirm all this tomm. but so far no crashes on my end. Sincerely,
Reply
Re: vista 64 bit
just got word from our software engineers that they have no plans for a 64bit driver. Sorry. Sincerely,
Reply
Re: Opto Branch
It all depends on the type of voltage being passed through the cable. If it’s low voltage say 8-40VDC, you’d probably never experience more than a single driver going out. If it’s high voltage, then there is a chance that both drivers on the same output could go with the possibility of losing other components within the output circuit.
Reply
Re: 64 bit.....
I also have a 64 bit Laptop and would like to know how to get the hardware (DMX controller) working, or the correct 64 bit driver. Or whatever way it would work if possible. If its not possible then thats ridiculous.
Reply
Re: Driver for USB DMX Box
Hi Jason, This symptom usually sounds like the DMX Driver in your interface is no good. You may not be using an OPTO isolator for protection. You can buy this chip for $10. - $15.00 to replace it or send it in for repair. However i would 1st recommend downloading the NOV 4 edition of compu live using the line Norona posted. This edition installs the driver together with the software, so they are always in the computer. If doing this does not solve you issues, then your interface would have...
Reply
Re: Archiving pages
Our developers are working to resolve the 64 bit driver issue however we have no arrival date or announcement planned for the immeadiate future. We are waiting on microsift to release the codec for the 64 bit driver. Sincerely,
Reply
Re: Problems with Softward on Mac Parallels
this is a tough one as we can't really say what that would be. on a PC i've never seen the Driver is corrupted. What version Compu Live are you using? Let me know and I will inquire within our group of colleagues to see if they know of this.
Reply
Re: Problems with Softward on Mac Parallels
These are 2 responses. I am nut sure what to tell you. Dylan is using a MAC BOOK with Windows installed and it seems to work but our products are PC compatible and I cannot guaranty they work perfecty on MAC system. We have had this problem before. Basically, for some reason, the Parallels has USB driver problems. For MAC we only reccomend using Bootcamp and less recently, Fusion. Parallels has never worked properly and consistently with our products. Hope this helps.
Reply
Re: Weird behavior
Like John said. the dmx going out of the dongle can be weak. the opto branch boost this signal and stabilizes and optically isolates it per output on the optobranch 4. This is really usefull as now you can run four dmx lines if you ever need to split you rig up and also if a surge or power failure ever occurs nad a spike gets sent down the dmx line it will only take out the DMX driver chip in one of the outputs on the opto thus saving your dongle. And after that you still have three outputs...
Reply
Re: vista 64 bit
I am still waiting for confirmation that we will be releasing a 64 bit driver sometime soon. I will get back to you as soon as I know something. Sincerely,
Reply
Re: stage setter 8 problems
Ya NEVER plug a DMX capable fixture into the power outlets on a dimmer pack. it will fry out your motors and perhaps the DMX driver chips. Sincerely,
Reply
Re: Design LED 36 Pro freak out?
hi Jon,if its only that one light its possible that the dmx Driver is corrupted. if you can please pull that one unit down and give us a call at 323-213-4593. we will talk you through some trouble shooting to narrow down the issue. thank you sir, Best regards, Gines Gines
Reply
Re: Using Korg NanoControl
I don't use CompuLive yet, but I do use MyDMX and the Korg nanoKONTROL. Let me share some experiences. Be aware that my experiences are MyDMX specific. My hardware is a MacBook Pro, the 17" with the upgraded screen, Mac OS X 10.5.8?(it's latest), BootCamp 2.1 and XP Home with SP3 on the PC boot(no emulation). 2 Gigs RAM, soon to be 4 Gigs. First, the Windows drivers for the Korg nano-series sucks. While the devices do not marry to a USB port, you may need to re-install the driver each time...
Reply
Re: Trackball use with DMX Programmer?
Chances are, it's just a serial port that has a generic mouse driver associated with it. I would say that if you're using a basic trackball, mouse, touch pad or any other controller that uses a typical 2-button mouse driver, you should be fine. Not a fan of trackballs myself, but I certainly see the advantage of a compact space. The rest of what you should need to know should be in the manual.
Reply
Re: SIUDI driver causing boot failure?
if that is the case you may delete the drivers by going into device manager and selecting the USB intelligent DMX interface and go to driver tab and select uninstall. Sincerely,
Reply
Re: emulation-updates
I was just talking to the developer last night. And I believe he said he was gonna release a new one soon. So I believe 2 weeks and it should be out. Also for those concerned we are also a few weeks away from a 64 bit driver for windows user of emulation. I do not know what the new features are but will happily post them when I find out. Sincerely,
Reply
Re: AR-32C USB Driver for 64 Bit Vista
Hi, So I dug up an old 32bit machine and installed the interface software on there but was still unable to get the usb drivers to install correctly. The program craps out at the same spot looking for the ncw_dmx20 driver. Any ideas? phil
Reply
Re: Want to be notified of new compu software and interfaces??
what i am saying for those of you that need a 64 bit version of the interface will have to upgrade to the new interfaces that will be out soon. The drivers that are required to run the software and have it detect your current USB to DMX interface will never work with a 64 bit OS. Our developers had to make a new driver and that new driver will only work on the new interfaces. Understand? Or do you have more questions? Sincerely,
Reply
Re: Want to be notified of new compu software and interfaces??
Who out of all of you that posted email addresses need the 64 bit version of the interface? If you are on a 64 bit vista or Win 7 and need the interface that uses the 64 bit driver. Let me know ASAP.
Reply
Re: CueCable drivers for Vista and Windows 7
I just purchased the Emulation software and I have Windows 7 64 bit driver. I spoke with a tech from elation and said i have to download the 64 bit driver from web site. I have, but im noticing on the installation that its showing files I dont have. The disc I have is a 1.00 version. My file has emulation 100 and instrutions show emulation 1003. Is there something I am missing or is there another version I should of recieved?
Reply
Re: Design Spot 250 09Er Error Code: Prism-Wheel Error
Gines, I tried everything you said. The magnet was still present (looked just like the one on the good light), but I decided to try swapping them anyway. After the swap, both fixtures behaved exactly like they did before. So, I know the magnetic sensor is good. The harness going from the sensor to the PCB is basically impossible to really trace back to the PCB b/c all the yellow, brown and orange wires are tie-wrapped with many other sensor wires (of the same color) going back to the PCB.
Reply
Re: CueCable drivers for Vista and Windows 7
James, I did do everything listed in the PDF. I got to a point where it said the driver was not digitally signed and wouldnt let me go further. I actually got around this and shut of that option in Vista. I got the driver installed, but it still would not show up in the software when I launch Emulation. In otherwords I am getting no "version" and the cue cable is not showing up under hardware.
Reply
Re: CueCable drivers for Vista and Windows 7
I do appreciate the help guys. I did go through the command prompt instructions also and got it to install. It still shows the Cue and Win Driver with the yellow sign next to them.
Reply
Re: CueCable drivers for Vista and Windows 7
Hi James, Read through this. This is what is coming up in my C: Promt Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>cd \Program Files (x86)\Elation\Emulation1028\drivers\win64 C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>install.bat C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>wdreg -inf windrvr6.i nf install WDREG utility v10.10. Build Sep 2 2009 09:43:37 Processing HWID *WINDRVR6...
Reply
Re: CueCable drivers for Vista and Windows 7
Any updates on the a fix for this? Elation never got back to me by e-mail? Last I heard last Friday was that they would look into it and send me a new driver? I desperately need a fix or I have to get another controller. Thanks
Reply
Re: CueCable drivers for Vista and Windows 7
Last two questions for you to look at from our developer. "# roll back to a date before the drivers was installed (with System Restore) and install again. # when you click on the CueCable and Jungo items in the Device Driver and go to Properties. What does the error message say?"
Reply
Re: CueCable drivers for Vista and Windows 7
James, Thanks for your help once again. This is so frustrating. The error I get when I went the Device Manager after doing the roll back is: Win Driver Error Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available. I also get the Unidentified Device installed, and it says that the software for this device has been installed...
Reply
Re: CueCable drivers for Vista and Windows 7
Loop. Do you know how to uninstall drivers? Have you tried wiping the emulation install out reboot and then install the software then install the driver?
Reply
Re: CueCable drivers for Vista and Windows 7
Happy to say that an Elation developer called me from Amsterdam. We are working on a solution to my driver and cue cable issue. Super nice guy and was as helpfull as could be. It seems as if I managed to find a new hurdle for the R&D dept. Thanks for the help guys!
Reply
Re: AR-32C
I am using Version 3.05. I also noticed that the drivers didn't install. ncw_dmx20 - Driver not found. I have ran DPInst64 which is in the "New Driver" folder and it says everything is working fine. Sooner I can get this working the happier my client will be. Cheers, Enoch
Reply
Re: AR-32C
Hi it's possible to send me the driver please. I have the same problem. I download the software and the driver but i can't use my ar-32c anyway. Thank! my e-mail is math55_50@hotmail.com
Reply
Re: update from sales for you 64bit unlucky ones
Jerome, I'm sorry that you are irritated as I can imagine. I wonder who you spoke with over the phone? Perhaps email me the details of that call to jamesk at elation lighting. I do know the last time I was informed we had a upgrade pricing plan in the works. I'm not sure if that has changed but I will be more than happy to find out for sure for you. And it is not just a simple driver update. if it was that simple we would be doing just that. I have been in contact with the developers...
Reply
Re: CueDriver problems
If you know someone who has a mac, you should try the cable on their computer. The mac installation doesn't require any drivers. You just drag the install into the applications directory, plug in the cable and you are good to go. That will let you know if the cable is good, and assuming it is, it will narrow the problem down to a windows driver problem. Hope this helps, Mike Intense Sound & Lighting
Reply
Re: Compu Cue Basic Siudi 8c Driver?
Windows installed a driver from the siudi_stick_ 32_64_bit folder, but i'm getting a solid green light on the interface and no dmx output/response in compu 2006. fyi Device manager says the device is working properly.