Tagged With "Par L Firmware V1.03"
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Individual fixture colors
James, Sorry I didnt get back to you last night, ran out of time Anyway, I sort of have it fgured out now though, got into the fixtures page and started making groups with the help of the manual as well. I have 2 scenes so far and have just been trying to get used to it. Im having trouble getting used to unclicking certain buttons to make changes, etc. etc. I was wondering, can you tell me why when I have the far right button active, any effect I click gets a little L in the lower left...
Reply
Re: Individual fixture colors
Hey hiker, I am available 11am-7pm Central time monday-friday. I know what the "L" is. it is saving that preset on;y for the fixtures you are using and it "L"ocks it down for just those fixtures. When your clicking around in the fixture group and you select your fixtures that you want to over ride always make sure the moving head with the Red crossed out circle on it is selected. the very first button on the left side. That is disable mode. If you make sure disable mode is on the "L" won't...
Reply
Re: Visualizer help
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply
Re: E-Node 8
Hi,Gines thanks for quick answer What do you need of Information from me looking forward Jean Jean Brücher Production manager 7, rue Dideschpont L-3622 Kayl Luxembourg E-mail: lutejang@lutejang.com Phone: 00352 621 160 320
Reply
Re: help with building a matrix
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply
Re: Introduction and basic questions
Thanks for responding, that's what I'm looking for. On my Operator and OpPro I have 8 scenes readily accessible with buttons. Seems that a color or color combo could be chosen for each song and use that in the BANK settings, then I'd just change scenes during the song. Here's what I've got on paper. Going to grab some fixtures from band today and practice programming. 1- quiet basic color scene for between songs, after blackout, quiet songs. 2. Aud Left 3. Center stage 4. Aud Right 5 slow...
Reply
Re: Expolite TourSpot 60 personality file
Hello S&L here is a link to the requested profile. Please let me know if there are any other profiles you need built. Thank you http://dl.dropbox.com/u/898418...ulation/Expolite.xml
Reply
Re: Expolite TourSpot 60 personality file
Hello S&L the issue sounds like your Emulation builds are different. Verify that your version of emulation is the same on both computers. a saved show file should open correctly between both mac and pc. When you have a new version of Emulation and save the show, then open it with an other version (say on your PC) there will be issues because the new version has bugs fixed and updated profiles. So, your first step is to make sure your versions match...This should clear up the problems you...
Reply
Re: Platinum Spot 5R problem
Rest lamp time .Page 16 manual .Go to info/time info/L-time password then enter code 038 then enter follow pronts .
Reply
Re: ADJ Mega Par Profile Lights
So I had to Give you the Praise Due. Your a life saver! I had the 6 Mega Pars and the 4 Color Strip Minis. I used the Profile for Mode/Chanel 4 with the Mega Pars (can't figure the mode thingie for the Color Strips so I use that regular Profile insted of the Mode Profile you have for them). That was the only one that got to work right, tho. I used the Chauvet Wireless Trans/Rec DFI Plus and ran everything from the Back Table where that followspot is. I'm Running a Dell Latitude 600 with...
Topic
Cameo Flat Par RGBW 7x4W
Hi Leute, wie bekomme ich ein Fixture für den CFP RGBW ? Kann mir jemand hier im Forum helfen oder muss ich mich an Elation wenden? MfG Chris Hi guys, how do I get a fixture for the CFP RGBW? Can someone help me here in the forum or must I turn to Elation? Kind regards Chris Cameo_DMX_Controle_Table.pdf
Topic
Color 5 and CW Current Firmwar
Could someone please tell me the latest firmware/software for these units? Thanks
Topic
Fuze Par Z60 Fixture Firmware
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
Need profile for Chauvet Intimidator SPOT 350 please
Hey was wondering if anyone could help me on getting the profile for the Chauvet Intimidator Spot 350 LED? Please and Thanks Adam L
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
Compu Live Not Responding
I purchased Compu 1024EC and installed Compu Live (03-21-2008) on a Compaq Laptop running Vista Home Premium (32 bit). On My first attempt, I installed the demo pages and started in beginner mode as the manual suggests. When I attempted to add my own Elation Cyber Pak Dimmer the software stopped responding. I was following the instructions for adding your own fixtures using the scan library. The fixture test in step 3 worked and I got through to the last step. When I clicked on the Finish...
Topic
Easy Show timeline not scrolling
I am having problems with Easy Show using the 11/08 version. The timeline will not scroll correctly when playing back a show using an mp3 file. You never know when one frame ends if it is going to move to the next frame in the timeline or not. At first I thought it must be that my machine isn't powerful enough to keep up graphically. Then I thought maybe my antivirus software or some other process was slowing it down. After deleting stuff and trying on several laptops I was finally able to...
Topic
Design Spot 575 Problems
My 1'st problem is, My gobo wheels are always getting jammed with that braking system that is on the wheels, Its always making contact with the nut behind the rubber and if you look at the gobo wheel itself, you can see the gobo wheel's all scraped up from all the rubbing on the nut, . 2'nd There are screws coming off of every part of the inside of the fixture and when they come off they damage other parts. 3'rd The magnets that are on the the effect wheel's of the fixtures are coming off...
Topic
Trackspot profiles
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic
Needed Profiles
James, Just bought the emulation software. Need profiles for the following fixtures/dimmers. Elation Stage Color (non led) You guys have the manual Lightronics RE-121 dimmer http://www.lightronics.com/pdfs/re121m.pdf NSI DDS 9800 dimmer http://www.retrevo.com/support...l/id/22985dj196/t/2/ Thanks, Roy Rhodes
Topic
Emulation for me?
Hi folks OK - so i have been battling this for over two years. I started with an Elation Show Designer 1 - decided i need to go to a PC. My brother bougtht ADJ MyDMX. He says no good. I buy Martin Light Jockey. I don't know about you - but VERY clunky and outdated?? SO is Emulation my answer? I have a rig with 40 Par cans (non LED) 8 Martin Roboscans (i know - old) 6 Elation Focus Spots and a few LED fxtures. I need a system to pre-program sequences (bands) . Can I program "presets" with...
Topic
Hello, Profile please.
This is for a Marathon Quad Derby MA-523. Thanks 1 channel 0--127 motor Position 128--191 Positive infinite rotation, from slow to fast 192--255 Reverse infinite rotation, from slow to fast 2 channel 1...255 Flash frequently from slow to fast 3 Channel 1...255 Red lasting lighted, from dark to bright 4 Channel 1...255 Green lasting lighted, from dark to bright 5 Channel 1...255 Blue lasting lighted, from dark to bright 6 channel 0--10 The effect from Ch1 to Ch5 11--33 AU 01 34--57 AU 02...
Topic
Design Brick 70 II
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic
Compu Live Fixture Grouping Problem
I have 14 of the same fixture (ADJ Flat Par Tri 18's) that I patched at the same time (all independently addressed). When I separated them into fixture groups I had separate group control over the On/Off but not the color mixing. Am I barking up the wrong tree here? I'd like to be able to separate them into zones (Drums/Stage L/Stage R..etc) and have complete quick access autonomous control over them. Thanks, Brian Savage
Topic
ProColor not responding to DMX
I have an Elation ProColor that is not responding to DMX signals. When I turn it on, the lamp fires up, and the shutter wheel and Color wheel auto adjust. I am pretty sure its not my dmx controller as it worked great with many other fixtures I worked on today. The only theory I have is that this fixture was sent off to be cleaned and when they put it back together they plugged the DMX connector into the wrong three pin slot on the Board. There are 4 spots where this 3 pin plug could possibly...
Topic
Need OMEZ Lighting/ HTL Emulation Personalities for various fixtures
Hey Jingles, I have a couple of lights I need to make work for a showcase at SIR in LA and have never seen them around before...They are High Tech Lighting/OMEZ Lighting products. If you can do this over the weekend I'd super appreciate it man, posting models and manual links below: 1. HTL Tri Color 18 Waterproof (7CH): http://www.omezlighting.com/manual/OM136.pdf 2. HTL Tri Color 20 (7 CH): http://www.omezlighting.com/manual/OM137.pdf NOTE The DMX and CH values look the SAME as previous...
Topic
James Thomas Profile
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Topic
KAM Powerbar Profile
A profile for the KAM Powerbar is in the Compu Show library. But that profile does not have the functionality I need. The Powerbar is a bar with four RGB fixtures attached. With 15 channel DMX one can control Master Dim, Programs, Strobe (which affect all four fixtures) and the Red, Green and Blue of each of the four fixtures individually. The preset in the library allows me to control Master Dim, Programs and Strobe, but, as best I can tell, whatever RGB combination is picked applies to all...
Reply
Re: ALright Elation Guys I need your Help with this
Ive Been Using Elation Products since 03'.Started out with 26 powerspot/power wash 250's, Now i Have the new design spot 575's 12 of them and 6 power wash 575's, Did major tours with American Idol, Tigres Del Norte, Vince Neil Of Motley Crue, and so many other artists, That prefer Elation over Martin or High End. Dont get me wrong here, High end And martin Are great Brands, But why Pay So Much For So little. Elation's Lights offer so much more for your money. I would Stick to Elation Great...
Reply
Re: External MIDI Trigger for BMP Rate
Matchless.. see if you can wrap your head around this. 1. create scenes or switches with 1 color each 2. create cycle with each of the colors 3. change the time for each scene/switch to GO inside the cycle 4. now when you click PAGE-DOWN on your keyboard, you control the timing of the cycle 5. to assign this PAGE-DOWN control to MIDI, open the CONSOLE window 6. right-click on the MIDI controller button that you want to use (any button will work) 7. you will see a blank area with 4 icons to...
Reply
Re: Lamp start Design Spot 250 Pro
I have been changing the delay number from 01 to 03 and it always seems to come on within about 20 seconds after I hit "lamp strike" in Compu. Do the number in the delay refer to minutes? If so, is there something else that I might not have set right that causes the lamp to strike at the same time no matter what delay time I have set.
Reply
Re: Lamp start Design Spot 250 Pro
Is the 01- 03 on the fixture itself or is that your time in compu? Sincerely,
Reply
Re: How does everyone organize their scenes/switches/etc
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply
Re: Future for 64bit?
James, On 16 October 2009 11:18 AM, within this thread I posted "Please don't tell me that my investment 10 months ago in a 1024 is now obsolete. I would find that decision to abandon existing users quite damaging to Elation's trusted relationship with existing and future customers." You responded on 16 October 2009 03:43 PM, "We will not be abandoning you." I respectfully request that Elation revisit this decision. If not, I am going need more information and an acknowledment that in fact...
Reply
Re: 3D visualizer.
it's in the profile creator. Click on the part in the red circle where it tells you what type of fixture it is. now it will let you adjust the L,W,H of the fixture in cm. Let me know if you have any questions. P.S. check out this new video. http://www.youtube.com/watch?v=UKdsFww89JU Sincerely,
Reply
Re: Are Playback Faders HTP or LTP + More
Hello Lighting Guy, How the playback faders / buttons respond to color mixing is an option within the program. You can enable or disable HTP. This option will affect the way all cuelists respond. Your mega panels do have Intensity and strobe controls. These options are in the Beam tab of the programmer window. Strobe option is abbreviated ST L (for strobe linear) and the intensity is abbreviated DIMM. This software gives you up to 48 fixtures (this is a relatively new feature, as it used to...
Reply
Re: Need help with compuware
Does anyone out there know what kind of device i can get to hook up this to make it work. I am using the following a toshiba laptop to run the compuware software. My video system is the numark avm01 mixer dvd 01 dual deck and avm 03 screens. i run my sound into my regular dj mixer which depending on which rig i go out with it could be the dennon dnx900 or the rane ttm57sl. so what i do is run the master from the avm01 out to one of these mixers to play the audio from the dvd that is playing...
Reply
Re: Elation Event Bar - alligning the spots
Hi two questions 1) is the firmware on my Event Bar upgradable... and how and where can i d/l the new firmware 2) I control the Event Bar with an ENTTEC DMXIS usb2dmx interface... and randomly the Event Bar stop responding. The refresh rate of the DMX signal from the DMXIS interface is 40Hz. what refresh rate il the best for the Elation Event Bar? TNx
Reply
Re: Follow Spot Function
Followspot function: https://youtu.be/tH06AMVCjvw?l...DPFJYvai0jkXqNUHuchu Phase allows you to control the offset of any effect made in Easy time or Easy Step. check it out. PS, we have a nice user community on Facebook, check it out here: https://www.facebook.com/groups/compudmx/
Reply
Re: SD1 and Generic Dimmer pack programming
Hi, After multiple tests using either of the Generic Dimmers definitions… I found that one definition is only 2 chnl and the other definition is 3 chnls. Instead of defining it as a Generic Dimmer pack I used RGBW and now I have all 4 channels working fine. Thanks, Phillip
Reply
Re: Problem with eNode 8 Pro / sACN and ETC Gio Lighting Desk
Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.
Topic
Fuze Par Z60IP Firmware V1.07
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic
DW Par Z19IP Fixture Firmware
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic
ACL Par 200 & 200IP Firmware
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic
Gigbar Move & Gigbar 2 Profiles
I've been trying to get the profiles for these 2 units. Can anyone help?
Topic
Enode 4 Firmware
Upload Tool: SNI Software Uploader eNode 4_V1.1 Only for V1.X units ENODE 4 V2.6 Firmware Only for V2.X units Enode update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...