Skip to main content

Tagged With "Firmware Tool Required"

Everything
Reply

Re: DMX Operator Pro

Jingles8302 ·
OK WELL THE PRO BLOCKS THE FIXTURES IN 16 CHANNELS EACH. THAT MEANS THAT FIXTURE BUTTON ONE CONTROLS CHANELS 1-16 AND FIXTURE BUTTON CONTROLS 17-32 and so on and so on. so if you wanted to put 1 led one each fixture button they would need to be addressed as follows. (assuming they are 6 ch's) led 1:001 led 2:007 led 3:017 (that would be on fixture button 2) understand where im goin with this? if you have dip switches here is a helpfull tool DIP SWITCH CALCULATOR Sincerely,
Reply

Re: Pre recorded shows

serraava ·
Generally pre-programing refers to patching the console and setting up a few basic cues, effects, chases, scenes, submasters, and/or palettes depending on your console. This is generally done with off-line editors. Just about all my shows are pre-programed in this fashion, so I simply have to load the show from disk or USB drive and start the fun programing. It is a great time saver. The type of pre-programing islanddj is talking about is done with virtualization software, like Elation's...
Reply

Re: What are some other uses for moving heads at weddings?

elationpro ·
Brian.. Lighting is huge!!! How many times do you go to an wedding and they have no lights!! It frustrates the heck out of me. You're selling the lights.. your selling the memory of a vision that will stay in all the guests minds of one of the best weddings they have been to in a long time! Aside from the stage lighting, the lighting can also convert to club dance lighting for the party. And when it gets dark you will have the fixtures to keep the ambient lighting down and have really good...
Reply

Re: ETC Express Profile for Design Spot 250?

serraava ·
No problem. If you go to ETC's website, on their Express page at the bottom there is a section called related products. In that section, you can click on Expression Offline and it will go to a new page. Click on the download tab and in the Off-line Software section, you will see Expression 3/Express/Insight 3 Off-line Software. Download and install that. Then go to the menu which you installed it in and open the Personality Editor. It is fairly straight forward to use. Any problems feel free...
Reply

Re: Design Spot 575 VS. Power Spot 575

serraava ·
Lol, thanks John. I will touch on the zoom a little bit because it is my favorite feature after CMY. The reasoning is instead of using an iris to make things smaller, you can use the zoom while not losing intensity vs the iris. The zoom on the DS 575 also let's you flood the stage. This, combined with the frost filter allows you to almost make washes with them. Depending on the angle, you can actually pass this off as a wash, namely in side, high side light situations. Truly a great tool.
Reply

Re: Is their a DVD to teach me how to use Showdesigner 3?

Jingles8302 ·
Hello BigE. welcome to the forums. the SD3 is one of our easiest controllers. you just got to get over the learning curve. the user manual is a very helpfull tool if you have flipped through it yet. or i believe we still have some DVD's for a how to on the basics of the SD3. send me an email with your name and address and i will try to get one staright out to you at no charge. my email is. Jamesk AT elation lighting DOT COM Sincerely,
Reply

Re: Scene Fade Suddenly Not Working

elationpro ·
Matchless, All is working good. I loaded your programming file.. it looks good. all working great and looking as it should. Nice work. I loaded Delux EVS and all the fixture positions loaded just as you set them on stage. Also.. looking very good. 1. I see your missing fades from scenes 1-25. scenes 31-54 have fades and they all work good then scenes 61-125 no fades again. Are you asking why are some scenes missing fades? Right click on the word "Master" right on the control window and you...
Reply

Re: How to fade lights when turning off.

elationpro ·
each page has multiple tool bars. Make sure the scene fade tool bar is activated for the page you have your scenes that your are trying to fade. then modify the fade times.
Reply

Re: How to fade lights when turning off.

mdthomas ·
Sorry John, but (as a beginner) your answer is over my head. I don't know anything about each page having tool bars. Can you please be more specific? When I loaded my fixtures they have several different buttons, but I don't know about any tool bars.
Reply

Re: Generic profile for a 5 chnl LED PAR can (MBT)

bobc ·
James, Thank you so much for the profile. Works Great!. I especially appreciate the chaser function you added. I have been exploring with different strobe rates - nice effect. I need to get the DMX traits to fine tune it - especially the dimmer function - exactly as you suggested. This program is quite complex and complicated, but maybe it just seems that way because I am still learning. I am determined to remain patient becuase I think CompuLive is an incredible tool for me take my live...
Reply

Re: Midicon firmware update

sdman ·
The reason for the factory update rather than over USB is that some of the low level USB firmware needed to be changed. The testing for the MIDIcon was all done with faster machines running XP so the problem never showed up. XP eats up more processor time than Win7 servicing MIDI. If your dealer does repair, it should be possible to get him the programming tool quickly so he can update your machine.
Reply

Re: iPad Support

goldmatte2000 ·
Yea I would really love to have this. Emulation is anpowerful little program and with more peripherals the possibilities are almost endless. The iPad is a great tool, I just wish I could use it to design.
Reply

Re: Lights don't work together anymore

bkiller ·
All cables have been replaced and shortest run is now 2 feet from the dongle to the first light. I will try the simple DMX tool you mentioned and see what I get.
Reply

Re: No interface detected

ano ·
yes that link I downloaded. 've tried a lot but nothing helped, including the "tool" I think it is in the drivers. I can possibly put the old drivers in the program? Gr Harold No probleem thad no of you one speak Dutch
Reply

Re: CompuLive Scene Fade not working, fade is immediate

Jingles8302 ·
you can easily turn the fade tool bar off or turn the fade off for any scene. Have you tried this? It's just a small check box. Post a screenshot?
Reply

Re: proton 3k strobe firmware

Jingles8302 ·
Here is version 1.1 firmware: Protron 3K V1.1 firmware Please be aware: You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply

Re: Basics of Compu Live 06

Jingles8302 ·
hey jon is here anyway for me to incorporate the follow spot tool into any of my shows with brent?? or does there have to be somebody at the controls for it to work?? we have 4 concept 1 scanners.
Reply

Re: Scene to Scene Transition

Jingles8302 ·
yeah. i use that on every page that i use. also another cool thing is the midi console u can use. another great tool. peace! jingles! and yes i am the master!! lol j/k
Reply

Re: Enode2 going to sleep??? Firmware issues?

Jingles8302 ·
Hi, Please shoot us an email to Firmware@elationlighting.com and tell us you've got the Enode 2 and you want to upgrade the firmware and we will send you the files and instructions, I do not know if you need a special firmware upgrade tool, but they will tell you that. Sorry again for the delay.
Topic

Artiste Davinci Fixture Firmware

Zach.S ·
Upload tool: E Loader III Artiste Davinci Fixture Firmware 1.2.8 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

KL Fresnel 8 Fixture Firmware

Zach.S ·
Necessary upload tool: CUE Software Uploader KL FRESNEL 8_V1.07 Firmware changes description: 2 extra dmx channels and "stage 2" dimmer curve added You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If...
Topic

Enode 8 Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader eNode 8 PRO_V1.9 Only for V1.X units eNode 8 PRO_V2.4 Only for V2.X units Instructions for uploading Enodes You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Enode 4 Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader eNode 4_V1.8 Only for V1.X units eNode 4_V2.3 Only for V2.X units Enode update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

WW Profile HP IP Fixture Firmware

Zach.S ·
Upload tool: E Loader III WW Profile HP IP_V1.0.9 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP IP Fixture Firmware

Zach.S ·
Upload tool: E Loader III CW Profile HP IP-V1.0.9 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Enode 2 POE Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader ENode2 POE_V1.3 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Colour 5 Profile Fixture Firmware

Zach.S ·
Upload tool: E Loader III COLOUR 5 PROFILE_V1.0.14 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Cuepix 16IP Fixture Firmware

Zach.S ·
Update Tool: CUE Software Uploader Cuepix 16IP_V1.0.5 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Beam Fixture Firmware

Zach.S ·
Upload tool: E Loader III Proteus Beam_V1.6.0 Only for V1.6.X units Proteus Beam_V1.5.1 Only for V1.5.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed,...
Topic

Platinum FLX Fixture Firmware

Zach.S ·
Upload tool: E Loader III PLATINUM FLX_ V1.8.2 Final Only for V1.8.X units . For more information please contact zach.santana@elationlighting.com You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you...
Topic

Paladin Firmware

Zach.S ·
Upload tool: CUE Software Uploader Paladin V1.18 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Platinum HFX Firmware

Zach.S ·
Upload tool: E Loader III PLATINUM HFX V1.3.6 Final Only for V1.3.X units PLATINUM HFX_V1.4.0 Final Only for V1.4.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

Spot Briteq BT-Theatre 60FC Black LED theaterspot

Technican ·
Spot Briteq BT-Theatre 60FC Black LED theaterspot I have got an demo. The spot Briteq BT-Theatre 60FC Black LED theaterspot is very good. We want to buy 10 of them but without fixture we can’t use them with Emulation. Can you do the job? If we have the fixture, how can we update Emulation with teh fixture, Best regards, Deschamps Koen.
Topic

Level Q7

Zach.S ·
Upload tool: E Loader III LEVEL Q7_V1.05 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Level Q7IP

Zach.S ·
Upload tool: E Loader III LEVEL Q7 IP_V1.05 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Artiste Monet Fixture Firmware

elationservice ·
Uploader Tool needed: None, fixture has a USB service port. Artiste Monet 1.3.4 & 1.4.1 Firmware Please ensure you read the included release notes document in the zip file. What's new: Mute Mode for fans via DMX control or menu. Please read the included Release notes that comes in the downloaded Zip file. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic

CW Profile HP Firmware

elationservice ·
Requires uploader tool: E-Loader. CW Profile HP Firmware V1.1.6 What's new: You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Rayzor 360Z Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Smarty Hybrid Firmware

elationservice ·
Upload Tool: E-Loader III/ USB Proteus Smarty Hybrid firmware V1.1.4 If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update your fixture. Please contact firmware@elaitonlighting.com for further assistance.
Topic

Paladin Panel Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Panel Firmware V1.02 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Rayzor 760 Firmware V1.2.2

elationservice ·
Uploader Tool Required: Proteus Rayzor 760 Firmware V1.2.2 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Smarty Hybrid

elationservice ·
Upload tool: E-loader or fixture has a USB service port. Smarty Hybrid V1.2.6 What's new: See release notes included in download. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

Artiste Picasso Fixture Firmware

elationservice ·
Upload tool: None, fixture has a USB service port. Artiste Picasso Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

eNode 4 pre-sales support questions

Dave Nelson ·
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Maximus Firmware

elationservice ·
Upload Tool: E-Loader III/ USB Proteus Maximus Firmware V1.4.1 If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update your fixture. Please contact firmware@elaitonlighting.com for further assistance.
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
 
Post
×
×
×
×