Tagged With "Protron Eclypse Firmware V1.5"
Reply
Re: scene setter 24 dmx channel addressing
Hey Carl, To assign the DMX Channels on "ADJ" branded version of the Scene Setter you will need to do the following: 1. Enter Program Mode by pressing and holding the Record button and entering 1, 6, 6, 8. 2. Enter Channel Assign Mode by pressing and holding the Record button and entering 8, 8, 8. 3. Once this has been done the display will read 001, you can now use the Up or Down button to select the channel (1-512) that you want assigned. 4. Once your desired channel is displayed, tap the...
Reply
Re: Compu Pro 06?
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply
Re: Compu Pro 06?
I am not using any lights yet, just the viewer. I am only working with conventional fixtures on the program right now, so there is no home position. The lights fade out fine when I make a "fade out" button, but changing between scenes is what I cant get to work. Basically Say if I fade up fixtures 1-5 on my first scene, but on my second I want fixtures 6-10 to fade in, but 1-5 to fade out.
Reply
Re: Compu Pro 06?
I have 5seconds in the first fade box(fades in just fine) and I have 5 seconds in the last fade box (does not fade out)
Reply
Re: Compu Pro 06?
try putting the last 5 sec. in either the first or second RED boxes. and i will do the same and let u know what works for me!
Reply
Re: Compu Pro 06?
ok i got it! what u want to do is put a 5 sec fade time in the second blue time box. the one with the solid blue line going up and then u want to put the last time (fade down) in the last red time box. the one with the solid RED line going DOWN! ok? try that and let me know!
Reply
Re: Help w/ DMX addys
The first pack should have only the first dip switch up and the second should have only the first and third up. This will make the channel 1 for the first and 5 for the second, thus covering all 8 channels you want. No, you can't separate the two plugs so you get 8 channels out of each pack, its strictly 4 channels. However, yes you can add more packs and "piggy back" or "daisy chain" (which ever term you prefer) off of the DMX outs from the last dimmer pack. You should already be doing this...
Reply
Re: Opto Branch
TAP is correct. However you should have both 3 and 5 pin outputs. If you get a 3 to 5 pin turn around you can actually use all 8 outputs making it an OPTO BRANCH 8. works great.
Reply
Re: Compu Live Questions
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply
Re: Compu Live Questions
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply
Re: Compu Live Questions
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply
Re: DMX Operator 192
Oh ok makes sense now. Now this is a new question, I have 5 lights right. So lets say I hook up all 5 lights one way at one event. I assign the pan/tilt channels to the joystick. Now if I move the setup around, and the units are running under different #'s, do I have to re-assign the pan/tilt to the joystick again?
Reply
Re: Compu 06 Help
Its a lightronics RD-121 12x1.2 Ive been at the church today messing with it, and if I do anything for then 4-5 seconds, its really jerky, like its dimming in small steps instead of a smooth fade.
Reply
Re: Compu 06 Help
Its not the dimmer... I plugged in an Elation pack and tried it and its doing the same thing. If I do a fade time of 5 seconds or so, its there but its real hard to notice because its so fast. If I do anything above that, around 60 seconds, its real noticible. Its like . . . . . . . . . . . Any ideas?
Reply
Re: Help with buying the best controller
sorry to keep bugging, but i'm new on all of these... can i run multiple scenes at the same time, say, fixtures 1-4 doing something, while 5-10 something else? plus the 8 cans?
Reply
Re: Help with buying the best controller
on the operator u can run your scene and take over a fixture on the fly. and manually run your pars i believe. but about your earlier question about having fx1-4 do something while 5-10 do something else that u can achhieve but would have to program all within the same scene. understand? let me know if u have any more question. peace! jingles.
Reply
Re: Design 36 LED
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply
Re: Compatibility Issue solved.
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply
Re: Design 36 LED
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply
Re: Dmx basic positioning and termination
yup me l337 soldering skillz and a bunch of luck!! only had to re-make one or two ends in the whole club. god im glad to be done pulling cable tho!!! had to make a ton of 5-pin ends for octopods/rivas though. WHAT A PAIN!! (note to elation: MAKE OCTOPODS WITH STANDARD ENDS!!!!!!!)
Reply
Re: Playing Drums and Triggering Scenes - Can I Do It?
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply
Re: Octopod 80 with Magic 260 profile?
Hi Lemon, Yes.. right now, you can control each pod individually. if you use the 48 ch. mode. So each pod will be 6 channels each. So pack 1 will start at 001 pack 2 will start at 049 pack 3 will start at 097 Ch 1 is rainbow ch 2 red ch 3 green ch 4 blue ch 5 strobe ch 6 chase If you use ch 6 to engage a chase of which you have 8 chases. ch 1 becomes speed time, and ch2 becomes fade time.
Reply
Re: Magic 260 Issues
Lopez, Don't know how much field experiance you have had with elation lights but yes, we are referring to position correction. The little sensor that elation uses for all of its position correction... moving heads position correction, gobo homing, color homing, proton color wheel homing...fail from high humitity. Most elation users that are 5 or less miles from the ocean will be extremely effected. Especailly if there is no outdoor housing for the light. The salty air will destroy the sensor...
Reply
Re: Lighting Newbie
Welcome to the forums! For the dimmer packs, whatever address you set it to (129 for your example) tells you all the address for each light. light one will be 129 and light 2 will be 130, 4 - 131, 5 - 132. so just use the faders (channels 129 - 132) to turn on the par cans. Make Sense? For the ADJ Accu Spot 250 II's, I'm not entirely sure how to do what your thinking but what I would suggest is to set some scenes and just recall your scenes. Set the first light to the left of the runway and...
Reply
Re: Wireless DMX problem
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply
Re: EasyShow
we built little floor mounts for our led par196 lights, clamped one on the back of the bass amp for me (The drummer). we have 4 moving head mini wash lights that are also on the floor. there are 2 colorstrips on each guitar amp. It is a really easy setup, once our instruments and amps are in place we drop the lights and hook them up in less than 5 minutes. our next step i think is black lights.
Reply
Re: Riva 80
Hey James - Yes, considering laptop or desktop computer for each Church this time around for ease of programming. Neither facility has ever used more than a light switch and a dimmer, so I hope by them NOT having experience, that the software is the easier route to go. The church in the pic above wants key light/features on the pulpit mainly. Then they want to be able to feature the orchestra pit (drums,bass,guitar - keyboard,piano - choir) Praise singers are just infront of the band. For...
Reply
Re: Demo Download?
There was a list of MASTER and about 4 or 5 other fixtures below that. As I double clicked each one, a list of Custom, Elation, and a few others came up. In the Elation list I saw the DLED lights but not the Spot 250 or the Acclaim lights. Did see the RIVA80 lights though, which are similar to the X-eyeHD lights from acclaim.
Reply
Re: SS8 Question
Jingles is correct that it is in the impedance of the cables. DMX is 110 ohms standard. The protocol also calls for 5 pin cable, when it only uses 3 wires. It was made 5 pin originally for expansion, so you could have 2 pairs running down one cable, or for other data of some sort. DMX is dieing however, so it will never be expanded to use the extra pins. Also, for longer runs, Jingles is right that you should only use DMX. You can however start to see problems with mic cable vs DMX at any...
Reply
Re: Scene Setter 48 issues, less than 1 year
So what should be the typical lifespan of these SS48s? I'm actually looking for something that will last at least 5 years without any problems. Thats why I'm thinking I probably should just spend the extra money to get something more professional. Such as an NSI or Leprecon.
Reply
Re: Scene Setter 48 issues, less than 1 year
Hi World.. Elation guy jumping in here. in the world of consoles in general the faders and buttons you commonly use will need to be replaced sometime or another.. sometimes sooner than later. With the Elation consoles we strive to use the good components to do the Job and not the best component made.. That is why you will see some lighting consoles for alot more money than the Elation product, and some consoles for less money. We believe our consoles are a great value for the price. However...
Reply
Re: dxm operator pro
32 max is pushing it. I generally start having problems with LEDs at 8 fixtures, depending on length of the run and fixtures in question. Dimmers, I daisy chain those things forever and they don't care, and I am talking racks upon racks upon racks. Movers, depends on the brand and length of cable in question. Some days it's 16, others it's 20, sometimes I can only get 6 on before the 7th starts acting up. If your last fixture in line is acting funny, and a terminator isn't helping, chances...
Reply
Re: What are some other uses for moving heads at weddings?
The power distro that I built has 5 20 amp circuits and 4/4 cable. Maybe I could add one more circuit to it and get a hubbell connector. The problem is getting someone to tie it in. Do you have a link to the hubbell that you are using? Are you talking about a single hubbell connector that will take 4/4 copper? I would be very interested in seeing it as it would make a few thing easier for me.
Reply
Re: Newbie looking for help/advice
Yes, you have 96 pages that you can add to 8 different books in different ways for each book. The console doesn't say how many pages per book, so I assume you can use as many as you want. Don't quote me on it though. Sometimes you will see something like number of steps per show or chase. So if it says 40 Steps per Show, that would mean each of your books can have 40 pages in it, but you can make up 96 different pages to use in the case of the DMX Operator Pro. Don't think of CompuLive so...
Reply
Re: Wireless DMX problem
I had an issue with the our Elation WDMX . We was doing a tent job and had 4 receivers in the air . We had issues getting all receivers to work . It intermittent and random . Sometimes it worked then it would not . We ended up running DMX cable . Back at the shop we determined the problem was specific to the Leprecon LP624 we had used . The WDMX worked fine with 2 NSI , 2 Lightronics , and 2 ETC boards . I love wireless ! I found some interference with HME wireless itercom on a Cigna gig .
Reply
Re: ADJ X-Move LED moving head...will there be an elation version soon?
I think Jon was correct when he said there are 20 1 watt leds on a circuit board. They do not make a single 20 watt led... If they did, ADJ would not be the first ones to have it. The highest wattage led ive seen was 5 watts.
Reply
Re: more easyshow screwups
i first had 5 songs in a row. about a month ago i added a 6th song to the end with scant errors every now and again. just recently i added a 7th song and now i'm noticing the crazy amounts of problems. again, it would be ideal for me to have everything in one file, because most of the songs interlude right into the next song... but i think to save myself the headache of problems that come along with it, im just gonna start programming single songs.. ugh!!
Reply
Re: design 108
Ok bdunard, here are the shots. Sorry it took a while to do, been really busy. First is white. The Opti 30 RGB on the left and DLED36 on the right. The target is about 5 feet away. As you can see, the DLED 36 is brighter, though not by much. The beam is also bigger, as would be expected in 25 degree angle vs 39 degree angle. Next is red. Then green. And lastly blue. One interesting thing I learned while doing this, the Opti 30 RGB is much better at matching the gel colors in the gel selector...
Reply
Re: design 108
Yes it does. I am still wondering if they are going to make different plates for them like Coemar has for their ParLite LED series, which is the direct comparison to Elation's DLED36. I have actually found that musicians love the LEDs over conventionals do to the lack of heat. They also love that I can get 'high' powered lights into a space with little to no power and not have to worry about tripping breakers. The nice part when someone thinks something is too bright, dim it. And then when...
Reply
Re: Compu Live Question
July 14, 2008 Help! I am sending this to 3 or 4 people I hope can help. I have installed a lighting system utilizing the following components: 1. – Acclaim s-fade6 at the entrance door 2. – Elation Compu -1024c 3. – an A-B switch 4. – Elation RMD620 Arc dimmer for house lights 5. – 6 Elation Pro Bar 4 – for an assortment of pars and ellipsoidals. 6. – 3 Elation RGB LED at various points in the path - They are addressed as 101, 108, 115 Problem: When the x-fade is operational it controls more...
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Noobie question..
Rick welcome to the forums. if you want to run dmx led lights on the S.S. 24 you are really gonna need a larger controller. you CAN use DMX lights with the S.S. 24 but are limited to only 24 channels. each dmx led par is about 5 dmx channels. which means 4 of those leds if you like them to be run individually will take up about 20 dmx channels. if you give me your email i can send you a PDF document about the basics and how to run DMX. my email is jamesk AT Elation lighting DOT COM so send...
Reply
Re: another noob question.....
Rick, What channel is the DP-415 address to? If using sliders 5-8 then it should be set to dip switch 1 and 3 on. Also on the Scene Setter 24 you can change the output channel for each slider. Have any of the sliders been changed to control different channels? If so, you can reset them by holding the record button and tapping flash button 7 three times, while in record mode.
Reply
Re: another noob question.....
Now I get it. To get channel 5 i need to dip switch 1 and 3 which equals 5. DUH So if I add another DP-415 I need to dip switch 1 and 4 to equal 9. It's all starting to make sense now. Thanks again for your help Sergio
Reply
Re: Help setting up lights... total noob
Ok... after reading through the forum (which is awesome) last night for a couple of hours I think I figured it out... 1. Set the first DP-415 to read channel 1 2. Set the second DP-415 to start reading at channel 5 3. Set the first group (Back wash) of Color Wash light to read channel 9 (Master/Slave mode) 4. Set the second group (Back lights) of Color Wash lights to read channel 13 (Also Master/Slave mode) Is this right? Am I even close?
Reply
Re: Show designer 3
Thanks for the help. I was hoping that was the case. I ordered the board today, should be here in 4 - 5 days.
Reply
Re: Compulive works, but no output from Dongle, Please help!
hello. Welcome. Sorry your having trouble. Tell me are you going from 3 pin to 5 pin at all?
Reply
Re: Compulive works, but no output from Dongle, Please help!
You know, I looked all over the place in the new user manual and could not find a disclosure. Past user manuals had this, and It should be in the current user manual. Please read carefully the following preventive measures carefully: 1. Place a DMX insulator between interface and DMX fixtures (e.g. DMX branch 4, Opto Branch 4) in order to protect them both from any interference and from overvoltage. 2. We advise you to have an available spare RS485 driver IC. This is an 8 pin electronic IC...
Reply
Re: DMX Operator Pro and MIDI
thanks everyone. I am going to really dig deep into the mydmx software tonight. I am fairly familiar with the compuware software so I hope it isn't to different. I would still like to have a couple questions answered about the operator pro though: Can you independently choose par scenes/chases from moving light scenes/chases? Is this the case with MIDI as well? If so, doesn't that give you thousands of combinations to choose from via simple midi notes? i.e. this par scene with this moving...
Reply
Re: Stage Setter *
Set the first DP 415 to channel 1 (dip switch 1 up) and the second to channel 5 (dip switches 1 and 3 up). That should take care of it. Then faders 1-4 will operate DP #1 and %-8 will operate DP #2