Multiple midi's

newearthMember

So I have a midicon and I've been trying to plug in a nano korg as well as a second set of readily available faders but the program doesn't respond well to it. If I already have stuff mapped to the midicon and then try to add the nano korg 1, then it wont let me add anything else to the midicon . It just continuously fails when I try to assign.

5/22/126:35 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Sorry for the huge delay on this but check the following.
-check the device is enabled in the MIDI device manager inside the software preferences

-check both devices are not transmitting the same messages, if so make sure they are working on different midi channels

-use the MIDI test window in the software preferences to check there's a good connection
Sincerely,

5/29/122:40 PM

❤️ 0

newearthMember

Everything is in working order but even the midicon isn't fully mapped out correctly. Only the first page and most of the second page are mapped out. I need some sort of tutorial on mapping from the manual. Has that been added yet?

6/13/1212:56 PM

❤️ 0

newearthMember

At this point, I'm unsure of what needs to be mapped out to what.

6/13/1212:57 PM

❤️ 0