We just bought a bunch of new LED par cans and chauvet LED light strips and a brand new DMX operator pro to run them. We hung all the lights, ran new DMX cables to all fixtures, terminated the signal at the last fixture, programmed the addresses as per the instruction manual, turned on the light board and ran into a problem. Only fader number 4 works! No matter how many fixtures we turn on or off, fader number 4 is the only one that controls the lights. It will run the LEDs through all their colors and strobes but nothing else works on the board. Does that make sense? We've tried every troubleshooting thing we could think of and still we have the same problem. Any help or suggestions would be greatly appreciated. Thanks!
Original Post