Dear Tech, I need help.
I have built the scene for 4 Par64 LED RGB with different color into 8 scene. Plus each scene, I have added the movement for Moving Head LED lights. Par64 were on Fixture 1 to 4 and Moving heads were on Fixtrue 5 and 6. After that I added those scenes to Chase 1.
When I RAN the chase 1, with Fader all the way down, the Par64 flashing on-off each color as I expected, but the Moving heads were moving so fast. I turn the fader up and speed down to slow the Moving Heads. They were OK as I wanted but the Par64 was affected with the fader, they did not turn on and off sharply. My question is how to make the Moving Heads slow down while the Par64 are not effected ? Thanks.
Another question about Elation Scene Setter Lighting Controller.
I think I need to control more fixture, this one should be the one. Thing is I am not familiar with this. My application is to control 16 par 64 (conventional light, 300W bulb)
16 Par 64 LED RGB, 4 LED wash lights, 8 Moving Head lights and few laser lights. Is this control easy to program for indiviually light? I wish to program the Moving Head and Par 64 seperately without effecting the master fader and speed.
Thank you so much!
True
Original Post
