Stage Ape Library

Could you link me too a user manual so I can see the DMX traits? I can just make you a profile if I can get the DMX chart.
Sincerely,

this is the information i found on the fixture.

DMX mode:

Part 1(single strobe)

Turn just dip switch #1 on the first fixture to the "On" position. Connect the fixture to the DMX controller with a dmx cord. When the strobe is receiving a DMX signal the small green light to the left of the dip switches will be light up.

Slider #1 controls speed
Slider #2 controls intensity from dim to bright
Slider #3
0-63 - A & B flash at the same time
63-147- Only strobe A flashes
128-191- Only strobe B flashes
192-255- Strobes A & B flash alternately (one at a time)


Part 2 (2 strobes on one channel)

With 2 strobes lights you can use the A & B features this light has to offer. This feature allows you to alternate between fixtures or synchronize their flashes. Set both strobes dip switches to show just dip switch #1 on. Then with a controller you can use slider #3’s features to enhance your light show.



i found this information at http://www.stageape.com/pages/kodiac.html

OK Great thanks. I'll make that profile for you very soon. most likely you'll have a link in a reply here on Monday.
Sincerely,

thanks James.

quote:

Originally posted by jingles:
OK Great thanks. I'll make that profile for you very soon. most likely you'll have a link in a reply here on Monday.
Sincerely,

Any luck with creating this library?

I totally had forgotten who I made this for. Here you go.
http://db.tt/WMjj6yP
My apologies for the lateness.
Sincerely,