i have 1-x310 &1-x310/2 both have the same problem . If you run the michine manually they output 100 % ,if you run them DMX they will only output about 40-50 % .Tried different consoles same result .switched the remote from other machine no change .Any help would be great.
Original Post
Hi fslp1, the button on the back of the unit is a priming function and does actually output at about 150%, however it should be for priming only, it should never be used for more than a few seconds and not relied upon for actual machine usage for an event.
I hope that helps clear up any confusion. Thanks!
Thanks for getting back to me .If you run the unit
on stand alone at 100% it outputs 50 to 60 % more then 100% DMX .The problem started about 9 weeks ago. I have a 3RD unit that works fine, befor that time all units worked the same. 1st unit 9 week ago 2nd unit about 7 weeks ago. Set them up on same DMX channel 1 works fine 2 unit 50% 3 unit 20% at 100% DMX

Add Reply

Likes (0)
Post
×
×
×
×