Skip to main content

Hi Folks,

I have just received a C-Loader II so that I can update some SixBar 1000's and other fixtures as they come through the workshop.

The C-loader seems to work in all respects except that I get a SC-Card Error when i try and update the fixture.

I can see the SD card on the computer to drop the files onto it and I have tried various combinations of leaving the files in the zip folder to unzipping the folder and also putting the individual files at the root level but to no avail.

Card is formatted as FAT32 and I have even tried reformatting.

Any advice for this issue would be appreciated.

Cheers AJ

Original Post

Replies sorted oldest to newest

Hi Victoria,

Sorry for the slow reply, I was away on a short break. I response to your query no I didn't get it sorted, as you can see form my original post there was no assistance provided and I didn't get much help going through the distributor either. I had put that problem aside until some new info came up. As such I have though taken Ela's suggestion (Thank you Ela) on board and have also ordered some 512meg SD cards to see if that will help. I am a repairer of entertainment equipment and have a mounting pile of elation gear that is out of service as it can not be updated (amongst other things) and getting the C-loader working would be a great asset.

As a note the SD cards are due in towards the end of Jan and due to work commitments I wont be able to action any of this till Feb.

Cheers AJ

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×