Skip to main content

Hi all. Very new to the lightman position and I have a DMX Operator Pro and 12 par 64 LED's chase speed/tempo question. I have my first page of scenes programmed and chase' as well. How do I get my chases to follow a tapsync que. I had 2 chases that I could set the tap sync while in a scene them when I go those chase it would follow my input... but not all of my chases did that. I dinked around some more and now none of them can be synced up before or even during chase operation. For the love of all things sacred... tell what I need to do

Yhank you for any input
Original Post

Replies sorted oldest to newest

Rem,
You'll need to unlock the chase in order to adjust the playback speed or fade.

Here's how it's done.
1) Select the chase (Chase indicator LED will begin to blink)
2) Now Press and hold the selected chase
3) While holding the selected chase, press the Mix/Step/Seq (Chase LED will begin to blink faster)

You should now be able to adjust the speed or fade

Please keep in mind that you'll need to do this for each chase.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×