Load fixture profiles to SD1?

Joel,
Good morning, unfortunately the SD Fixture software is only compatiable with the SD-2 and SD-3. If your fixtures is not on your SD-1 group of fixtures what you can do is find a fixture (similar) to the one you are using and go to Modify A Fixture on your menu. When in Modify A Fixture you can then rename the fixture, change the channels on that fixture, set the blackout channel (shutter), etc. If you have any questions feel free to contact our customer support dept at 866.245.6727 (8AM - 5PM PST.) or email support@elationlighting.com

Rafael C.

Thanks. That's what I figured.


Any suggestions for a similar fixture for the Chauvet LEDrain 64C in 7-channel mode?

Joel,
I checked out the DMX traits for this light. You can pretty much go with any LED type fixture or with any dimmer type fixture which is on there. In Modify A Fixture you really won't be able to get into detail as far as the individual traits on the DMX channels (for instance on channel 6 of the LED RAIN) but you will be able to set the number of DMX channels, rename it and assign the black out channel (channel 7) and value (0) etc. Let me know if you need further assistance.

RC

Just a small note to what RC mentions.
Its easier to use the 32 DMX Channels fixture.

you can modify that to be anything..

that's what I use all the time.

Best regards,

Got it. Makes sense. Thanks, RC and John.